NPP Series Nominal PP Melt Blown Filter Cartridges are made of 100% FDA approved polypropylene material, without binders, additives and lubricants. PP melt blown filter elements are manufactured to suit different pore diameter of nozzle-spraying melt blown machines. PP melt blown filters have multi-layered constructions with fine fibers in inner layers while in outer layers fibers are coarse, which lead to progressive contaminant removal efficiency and consistency of good performance.
PP melt blown filter cartridges own high dirt holding capacity, low pressure drop, high flow rate, good chemical resistance, long service life and effective filtration for suspended particle, sediment and other kinds of impurities, also, there is no fibre released. PP melt blown cartridges are economical and classical filter media, which are widely used in liquid prefiltration industries.
| Filter Media | Polypropylene |
| Length | 5", 9.75", 9.8", 10", 20", 30", 40", 50", 60", 70" (According to customers requirements) |
| Inside Diameter | 28mm, 30mm (Special ID is accepted) |
| Outside Diameter | 2.36"(60mm), 2.4"(61mm), 2.5"(63mm), 2.55"(65mm) (Special OD is accepted) |
| Filtration Rating | 1μm, 5μm, 10μm, 20μm, 30μm, 50μm, 75μm, 100μm |
| Gasket/O-ring | Silicone, EPDM, Viton, Buna |
| End Cap | DOE, 222/Flat(SOE), 222/Fin(SOE), 226/Flat(SOE), 226/Fin(SOE) |
| Food & Beverage | Plating solution | PCB industry |
| Chemicals and Solvents | Pre RO/ID water filtration | Pharmaceuticals |
| Petrochemical Process | Industrial waste water treatment | Electronic Industry |
Operation Data for PP Melt Blown Filter Cartridges
| Maximum Operating Temperature | 60 ℃(140℉) |
| Max. Differential Pressure | 3.0 bar at 27℃ (43 psi at 80℉) |
| 2.0 bar at 60℃(29 psi at 140℉) | |
| 1.0 bar at 60℃(14 psi at 140℉) | |
| Liquid Flow Direction | Outside to inside |
| Recommend Change out Differential Pressure | 2.5 Bar |
Pressure Drop Rate of 10" PP Melt Blown Filters
| Construction of PP Melt Blown Filter Cartridges | ||
|
● The cross-section drawn of PP melt blown filter cartridges ● From inner layers to outer layers of PP filters the fiber is fine to coarse ● Multilayered structure and depth filtration pattern ensure good filtration efficiency ● Formed by thermal bond without using of any binders, adhesives and and lubricants ● 100% FDA approved polypropylene for compatibility with wide range of process fluids |
|
|
Working Principle of PP Melt Blown Cartridges |
||
|
● The drawing is the working principle of layers structure depth pp melt blown filter cartridge ● Layers filtration keep pp melt blown filter high flow rate, good filtration efficiency and long service life ● Large particles are filtered in outer layers of melt blown cartridges which are constructed by coarse fiber ● Small particles pass the outer layers, then filtered by inner layers wich made of fine fiber and high precision
|
|
Installation of 40" 5 Micron PP Melt Blown Filter Cartridges
● Hongtek brand depth PP melt blown filters used for pre RO water filtration
● The central of PP filter elements are still no polluted, so that keep liquid clear after filtration
● After used PP filters compare with before used can apparent know the good efficiency filtration
● High quality and reasonable price melt blown cartridges increase of longer service life and save much cost
● No fiber drop out, high dirt holding, low pressure drop, high flow rate and high pressure resisting capability
| NPP | ID | OD | Micron Rating | Length | End Cap | Gasket/O-ring |
|
NPP Series Nominal PP Melt Blown Filter Cartridges |
A = 28mm | C = 60mm | 1 = 1μm | 5 = 5" | D = DOE | S = Silicone |
| 5 = 5μm | 9.75 = 9.75" | |||||
| Q = 61mm | 10 = 10μm | 9.8 = 9.8" | T = 222/Flat(SOE) | E = EPDM | ||
| 20 = 20μm | 10 = 10" | |||||
| M = 63mm | 30 = 30μm | 20 = 20" | O = 222/Fin(SOE) | V = Viton | ||
| B = 30mm | 50 = 50μm | 30 = 30" | ||||
| 75 = 75μm | 40 = 40" | P = 226/Flat(SOE) | ||||
| F = 65mm | 50 = 50" | U = Buna | ||||
| 100 = 100μm | 60 = 60" | L = 226/Fin(SOE) | ||||
| 70 = 70" |
For Example:
NPP-A-M-5-40-D
NPP Series Nominal PP Melt Blown Filter Cartridges - 28mm - 63mm - 5μm - 40" - Double Open End (DOE)
Special specifications PP Melt Blown Filter Cartridges can be customized, such as special ID, OD, length and end caps etc.
Business Info （公司经营范围）
Business Range: Industrial Equipment & Components , Manufacturing & Processing Machinery
Management Certification: ISO 9001
Main Products: High Flow Filter Cartridges, High Flow Pleated Filters, PP Melt Blown Filters, Water Filter Cartridges, High Flow Filters, Pleated Filter Cartridges, Carbon Block Filters, String Wound Filters, Water Filter Bags, Filter Housings
Profile（公司简介）
Hongtek brand concept: Make Better Filtration!
Hongtek Filtration Co., Ltd. is famous for high-tech filtration, separation and purification, committed to provide high quality filtration solution to meet worldwide customers various needs with good service, struggle for health, safety and environment friendly sustainable development.
Since 2000, Hongtek specialize in better filtration solution, supply good quality high flow water filters & housings to a diverse range of customers in water treatment, food & beverage, electronics, oil & chemicals, petrochemical, sea water desalination, power generation industry etc. We are always committed to create more value for customers and engage in win-win business.
Disclaimer: China Truck Manufacturers.Com is not responsible for the accuracy, authenticity, or legality of any information posted by suppliers. China Truck Manufacturers.Com will not be involved in legal disputes arising from transactions between customers and suppliers. China Truck Manufacturers.Com is a platform which connects potential buyers to potential sellers. China Truck Manufacturers.Com is not responsible for disagreements and disputes; such disagreements will be negotiated or settled at the expense of the buyer or seller. China Truck Manufacturers.Com provides platform service for buyers and sellers instead of self-operated service.
Contact Information: If your legal rights are violated, you are welcomed to send an email to our in-box. For issues arising from infringements, complaints, please contact [email protected]
