Waste car motor oil recycling machine/Waste engine oil recycling and decolorizing

Aplication:

FZB-J series waste oil high temperature distillation equipment is mainly used for regenerating lubricating oil such as engine oil, lubrication oil, hydraulic oil, gear oil, diesel, and other oil mixture by vacuum distillation to acquire the qualified base oil and bits of gasoline or diesel. During the process of distillation, the hydrocarbon chain breaks to reform new the molecule of the oil, then turns into oil mist. Then the oil mist turns into liquid by condensation and the qualified oil comes out finally. The equipment can effectively remove wearing debris, pitches, waxes, impurities, water contents, carbon deposits, oxides from the oil and decrease its acid value.

It is especially suitable for oil refineries and small enterprises who is in need of waste oil disposal. It is energy saving, environment friendly, and bits of waste residue generating. The waste residue does not contain oil and pollutes environment. During the processing of the oil regeneration, oil mists and volatile matters are discharged after being burned and purified. Its heat supply mainly adopts burning oil, natural gas, coal or electric heating.

Equipment Pictures:

Advange:

1) It adopts the advanced technology of reduced pssure distillation, does not use sulfuric acid and white earth but just a small quantity of additive material which is low-cost and easy to purchase;

2)It runs at very low cost. 1T of waste oil treatment just costs about $30 to produce high qualified base oil. Catalyzer is the low-cost basic material commonly used in chemical engineering and can be found anywhere;

3)It is easy to operate and with low operation cost, and can be operated well by just 1-2 person;

4)It is available for purifying and regenerating waste oil such as waste machine oil, various engine oil and lubricating oil, etc.

5)It is environment friendly. This equipment is completely sealed and never lets harmful gas out. And all colloid and asphaltic carbon oil of the waste oil turns into oil sludge which can be used as pitch and fuel;

6)Its recycling efficiency is very high. Its recycling rate reaches 85% and higher, while 80%~85% for base oil, 6%~8% for mixture of diesel and gasoline, and 8%~10% for oil sludge;

7)It is with tight and high vacuum system to ensure the equipment running at ultimate vacuum degree;

8)It regenerates oil of high quality. The regenerated base oil is without particular smell and color changing;

9)It is equipped with tail gas treatment system to ensure the emission standard for environmental protection.

Technical Data & Selection Guide:

Product Quality Guarantee & After Sales Promise:

(1) Product Quality Guarantee:

I. Our company is a production enterprise authorized by ISO9001:2008, receives third-party technical supervision, and all products quality is guaranteed.

II. Our company is high-level management and high-quality construction enterprise, and our products have obtained many technical patents.

(2)After Sales Promise:

I. 1 year of quality guarantee period, lifetime warranty. Installation and trial run and training operators at site, the travel expenses and board and lodging expenses shall be supported by consumers.

II. We takes full responsibility for equipment, components, and quality of design, production, and material which have been supplied to users.

III. We provides its lifelong spare parts and maintenance service.

IV. When receiving notice of maintenance, we shall give a clear answer to the user within 1 hour, and reach the malfunction site within 36 hours to solve problems.

V. We promise that the service life of the equipment shall be no less than 20 years at the normal conditions of correct installation, normal use and maintenance.

VI. We shall provide priority to users while carrying out technological transformation if any technical innovation.

Product Manufacturing Standards, Quality Control Standards, Quality Control Capacity And Measuring Means:

(1)Product Manufacturing Standards:

I. GB985-88 (Types And Dimensions Of Gas Welding, Shielded metal Arc Welding, And Gas Shielded Welding JointS)

II. ZJB150.004 (metal Welding And General Technical Welding)

III. GB8928-88 (Steel Surface Corrosion Grade And Derusting Grade Before Paint Coating)

IV. GB191 (Packing, Explanatory Chart, Marks)

V. GB/T13306Packing, Transportation, Storage

VI. GB/T13306-91Labels

(2) Quality Control Standard

I. SD 313: oil particle granule number and size distribution measuring method (automatic particle calculating instrument)

II. GB 507: electrical oil insulating strength measuration

III. GB7600: Working transformer oil moisture content and gas content measuration (Coulometric Method)

IV. DL423: Measurement of gas content in insulating oil (vacuum pssure difference method)

V. GB10894: Measurement of separating machineries'working noise power level (engineering method)

VI. DL 429.2-91 Power systems oil quality testing method (color measuring method)

(3) Quality Control Capacity And Measuring Means:

I. Pressure Test (pssure gauge) II. Trace Moisture Measurement (KF-100 trace moisture tester)

III. Breakdown Voltage Test (JJC-80 dielectric strength test) IV. Flow Rate Test (LL-50T flow meter)

V. Working Noise Test (HM2553B Working Noise Test) VI. Acid Value (PH Value) Test (PHS-4 Type Intelligent Acidity Meter)

VII. Chromatography, particle size or other analysis shall entrust Chongqing Electric Power Testing Institute or other authoritative departments to do the related tests.

Chongqing Lushun Scientific and Technological Development Co., Ltd., is a high-tech enterprise for researching, designing, developing, and producing vacuum oil purifier. With its continuous drawing of lessons, unremitting innovation and borrowing of advance technology from both at home and abroad, Lushun oil purifier company is now becoming a professional manufacturer of oil-filters which are excellent in quality, capable of standing wear, complete in various styles. And its products are widely applied to various sectors such as electric power, petroleum, chemical, metallurgy, mine, mechanical, aviation, ship, railway, pharmacy and edible oil processing.

Though highly acclaimed and favorably accepted by numerous customers and possessed of the right to import and export, to secure the high quality of our products, we conduct our manufacturing in strict accordance with the standard JB/T5285-2001 by Ministry of Machine Building, standard DL/T521-93 by Ministry of Power Industry.

With strong technology development, advanced products mass-production, perfect quality control, smart market design, and excellent after-sale service, Lushun Oil Purifier Company has formed a rigorous management system. And every link is in its production process: Purchasing of components, packing, storage is in strict compliance with standard of ISO9001: 2000. To secure the high quality of our products, every oil-filter is checked and put into trial-running. It follows the domestically-pursued principle "the requirement of the next working procedure imposes a command for the early working procedure" that secures the good quality of its products in the working process.

Guideline for the Quality

First-class quality, satisfied services, leading Enterprise in the world.

Aim of the Quality

Qualified products, satisfactory quality, reasonable price, perfect after-sales service for customers both at home and abroad.