Vacuum current carryinghose pssure testing machine


Functional Overview:

The equipment is in accordance with UL507 requirements of the design of the wire wear test equipment, the test will be fixed at one end of the power line in the horizontal movement of the slider and then around the belt around the belt, the end of a 340g weight Code, the slider moves back and forth, after the test 800 times to suspend, the belt drive wheel to move the belt to make the test wire contact with the new surface of the belt, continue to the next 800 times the cycle test, a total of five cycles test.

Features:
1, the crank link mechanism installed in the chassis inside, possession of space is small, safe.
2, the use of aluminum alloy structure and aluminum surface oxidation, with optimized structural design nice appearance.
3, there are manual / automatic selection, easy to measure and adjust the test.
4, belt with unilateral suspension, easy to replace the new belt.

Function parameter:
1, in line with UL507 standard requirements.
2, wire clamping method: five samples with a fixed on the moving slider, around the belt after the horizontal state.
3, slider drive mode: AC variable speed motor drive crank connecting rod mechanism.
4, crank speed: 28RPM (speed can be adjusted in the control box).
5, the hose movement distance: 160mm.
6, belt moving speed: 0.5m / min (speed can be adjusted in the control box).
7, each test cycle after the belt moving distance: 190mm (equivalent to the rotation of the pulley 1200)
8, Belt: Grade1 / 2 Belt.
9, belt circumference: 1300mm.
10, weight: 340g ± 13g.
11, the belt diameter: φ180mm.
12, sand roller center distance: 350-370mm.
13, sand pulley structure type: unilateral cantilever, passive belt tensioning device, replace the new belt, the release tension wheel, the belt from the side out.
14, sand roller drive: stepper motor.
15, the number of cycles per cycle: 0-999 times (can be set).
16, count the way: the slider every time to move back and forth a cycle.
17, the number of cycles: 0-99 times (can be set).
18, count mode: digital counter.
19, the test station: 5.
20, Dimensions: (WxDxH) 500mmx800mmx1600mm.

HONGKONG BONAD TECHNOLOGY LIMITED SHENZHEN BONAD INSTRUMENT Co., Ltd. is a high-tech company in HongKong, producing all kinds of precise instrument. We specialize in the high quality of Electronic Safety Tester, Gauges for lamp caps and lampholder, Laboratory Equipment, Test Chamber, Test Equipment, Lux Meter, Weight Sensor and Electric Ruler and so on. We have gathered lots of well educated and experienced researchers and administrators on this electric products. All of our products comply with international quality standards and are greatly appreciated in a variety of different markets throughout the world.

All products manufactured are strictly in accordance with various EN, IEC, CE, UL, VDE, VS, JIS, ISO, CEE, BS, FMV, GB and other similar international standards.

Main Products include: Test Chamber, Weight Sensor, Load Cell, Electrical Ruler, Glow Wire Tester, Needle Flame Tester, and Vertical Burning Tester, Melt Dripping Tester, Building Materials Flammability Tester, Accessibility Probes, Spring Impact Hammer, Electrical Safety Tester Series, Environmental Tester, IPX1-8 waterproof test equipment Universal Testing Machine, Socket-outlet Gauges Series and other testing instruments.

Our main business partners are from Europe, Asia, North America, Africa and other countries and regions around the world. We are always one of the most popular precise instrument manufacturers in the whole world!