Product Des
cription
Stainless steel water storage tank with ISO
Stainless steel water tank brief profiles and features:1.Stainless steel water tank is made of SS304 or SS316 raw materials and the quality higher,lifetime longer,generally used for storing drinking water.
2.It is sectio
nal structure and assembled by panels among 1000
x1000mm,1000
x500mm,500
x500mm three sizes,customized according to the requirement.
3.Stainless steel water tank is widely used in Building,hospital,bath center,water treatment,climate-drought region etc.
4.It is machine-molded product and all raw materials are enviro
nment friendly and hygienic tohealth.
Advantages
5.
Never Rustedim
ported food-grade SUS304,SUS316, stainless steel,unique anti-rusting performance.
6.
Never LeakedUnique structure and all-welding operation, excellent strength.
7.
Free CombinationPattern and capacity can be customized according to actual usage environment, no
demanding requirement, especially suitable for upgrading project.
8.
Reasonable StructureUnique board design and pss processing, reaso
nable inside supporter and high-strength
stainless steel material makes the water tanks have an excellent strength and streamlined
outlook.
9.
Light & Cost-efficientAdopting 1-3.0mm stainless steel panel, significantly reduce the weight of the water tanks,
make it more cost-efficient.
Thickness parameters
Tankheight (mm) | Thicknessofcorrespondinglayer |
Bottomlayer | Sideonelayer | Sidetwolayer | Sidethreelayer | Sidefourlayer | Coverlayer |
1000 | 2.5 | 1.5 | / | / | / | 1.5 |
1500 | 2.5 | 1.5 | 1.5 | / | / | 1.5 |
2000 | 2.5 | 2 | 1.5 | / | / | 1.5 |
2500 | 3 | 2.5 | 2 | 1.5 | / | 1.5 |
3000 | 3 | 2.5 | 2 | 1.5 | / | 1.5 |
3500 | 3 | 2.5 | 2.5 | 2 | 1.5 | 1.5 |
4000 | 4 | 3 | 2.5 | 2 | 1.5 | 1.5 |
Installation:
Stainless steel water tank can be co
ncrete strip foundation beam, I-beam, or "C" shaped channel. Stainless steel water tank on the top corner with a breathable air filtration devices, device specifications and quantity determined by the manufacturer according to the size of im
ports. Stainless steel water tanks use the internal reinforcement. Each nozzle flanges are standard flange 1.0MPa. Designers in the layout of the tank position, reference should GB17051-1997 seco
ndary water supply facilities, sanitation norms. When the water tank specifications and technical parameters, or orientation is not suitable for practical use, stainless steel water tank designers determined according to actual needs psented.
1, welding stainless steel water tank machines needed: Computer pulse seam welding machine, semi-automatic roll bar machine, spot welding, plasma cutting machines, electric scissors;
2, welded stainless steel tank bracket required machine, welding machine, cutting machine, multi-angle roll bending machine;
A, tank foundation requirements
Co
ncrete foundation geometry should GB02S101 relevant regulations formulated. Co
ncrete foundation plane height difference <5mm.
B, stainless steel water tank installation, co
nstruction and acceptance
Professio
nal TIG welder spot. Co
nstruction site with standard power supply. Tanks surrounded ≥500mm maintenance space. Visual inspection no rust, no pollution: Filled with water 2-3h, Case no significant deformation, weld no leakage is qualified.
C, water tank use, repair and maintenance
When the pipe to the pipe inlet and outlet do not apply excessive load. Do not place the weight of valves and large-diameter pipe is directly applied to the tank outlet, set the tube support if necessary: For welded pipe expansion, contraction, vibration must be installed retractable flexible joints.
Pressing a stainless steel plate welded tank made of stainless steel plate stamping out the ribs and welded stainless steel bars welded together, simple structure, good strength, can produce larger capacity tank. Because box made of stainless steel plate welded, completely blocking the sunlight exposure, it will not breed algae. Make the water remains clean.
1, stainless steel water tank full of water experiments, 48 hours without leakage;
2, pipe joints, valves and related accessories for any leaks water phenomenon;
3, observe the water supply system functio
ning properly;
4, check whether the water disinfection system is working properly.
Full of water experiments:
After the completion of the production of the tank, the tank is completely filled with water, after 2 to 3 hours, with a heavy hammer lead along both sides of the weld 0.5 to 1.5 kg to a
bout 150 millimeters wher
e tapping, watertight qualified; If found leaking place shall be re-welding, and then experiment.
Tensile strength Mpa | ≥70MPa |
Bending strength | ≥100 Mpa |
Barcol hardness | ≥60 |
Water absorption | ≤ 1.0% |
Flexural Modulus of Elasticity | ≥ 5900MPa |