Product Description
SMC FRP GRP Water Tank for Enterprises and Institution/Tank



The panel tank is amodular system, which then enables atank of any desired size to be assembled and constructed. These tanks are generally offered as Insulated or Non-Insulated.
SMC GRP water tank has passed through chemistry and toxicology tests conducted by Chinese Environmental Sanitation and Hygiene Engineering Institute of Chinese Medical Prevention Academy and Beijing Disease Prevetion Center. The results of the water in the tank is in line with national drinking water standards and Japanese high level sink standard.
Application:
Industry, Mining, enterprises, public institution, residences, hotels, restaurants, reclaimed water disposal, fire controlling, other buildings to serve as the water storage facilities for drinking water, other water storage usage.

The tank panel size:
The specifications of water tank panels: 1000mm x1000mm, 1000mm x500mm, 500mm x500mm.
The thickness usually 1-5mm by design Special thichness can be made by requests.
Capacities From 1000 liters to 1000000 liters.
Size of the tanks: 1m³ -1000 m³


Advantages of GRP Tanks:
High tensile strength, corrosion resistanceDurability, long service lif of more than 30 years Excellent UV resistance characteristics and performanceSmooth surface of the panels No leakageConvenient transportationEasy installation. Can be relocated easily from one location to another several timesLow cost maintenanceFlexible sizes and shapes by design could range from 1m³ to 1000 m³Can easily be extended at any time as storage requirement increase.
GRP FRP water tank panel technical parameters:

Items	Technical parameters
Tensile Strength, Mpa	≥70
Flexural Strength, Mpa	≥100
Flexural Modulus, Gpa	≥5900
Barcol Hardness	≥60
Water Absorption	≤1.0%
Glass Fibre Content	≥25%

GRP water tank specifications

Height(m) Capacity L xW	1.0	1.5	2.0	2.5
1.0*1.0	1.0	1.5	2.0	2.5
2.0*1.0	2.0	3.0	2.0	5.0
3.0*1.0	3.0	4.5	4.0	7.5
4.0*1.0	4.0	6.0	6.0	10.0
5.0*1.0	5.0	7.5	8.0	12.5
2.0*2.0	4.0	6.0	10.0	10.0
3.0*2.0	6.0	9.0	8.0	15.0
4.0*2.0	8.0	12.0	1.0	20.0
5.0*2.0	10.0	15.0	16.0	25.0
3.0*3.0	9.0	13.5	20.0	22.5
4.0*3.0	12.0	18.0	18.0	30.0
5.0*3.0	15.0	22.5	24.0	37.5
4.0*4.0	16.0	24.5	30.0	40.0
5.0*4.0	20.0	30.0	40.0	50.0
5.0*5.0	25.0	37.5	50.0	62.5
6.0*5.0	30.0	45.0	60.0	75
7.0*5.0	35.0	52.0	70.0	87.5
6.0*6.0	36.0	54.0	72.0	90.0
7.0*6.0	42.0	63.0	84.0	105.0
7.0*7.0	49.0	73.5	98.0	122.5

We can make the tank size according to your requirement.


Accessories:
Fixings &Fastenings
All nuts/bolts and washers in contact with the water are of stainless steel. Non-immersed nuts, bolts and washers are either zinc plated, passivated or galvanised.
Sealant
All joints &bolts are sealed with approved materials to ensure the product is water tight.
Internal &External Reinforcements
For all tanks over one metre high -extra reinforcements are required. Internal stainless steel tie rods to (BS 970 part 4). External steel sections are Hot Dipped Galvanised as per standard.
Supports
UPVC or GRP vertical supports are fitted to give support to the cover.
For underground tanks supports please contact our Sales Department for specifications.
Ladders
All ladders are GRP for internal &external use. Alternatively we can offer stainless steel for internal usage and galvanised for external application (Standard or hooped to BS4211 if specified).
Installation method
1. During installation leave the installation access between the tank body and the wall of more than 800mm, for the tank top, the bottom --more than 500mm;
2, Before construction make concrete strip foundation;
3, After assembly close outlet pipe and vent pipes, open water inlet, the tank is qualified when the tank is filled with water and after 24 hours there is no leakage of water;
4, At the construction site is provided construction power.

Installation note:
Tank foundation can be concrete strip beam, or Ibeam. At diagonal corners of the tank top are equipped with air filtration devices. Inside the water tank are ribs. Each connection flanges are standard 1.0MPa flanges .

Cautions
1. Please do not store water higher than 70°C or other liquid (chemicals, oil and so on).
2. Water tank must keep away from fire.
3. Prevent pollutants and plunges from outside.
4. Use soft apparatus to clean. As to the new water tank, clean twice before use.

FAQ
1.Q:Are you factory or trading company ?
A:We are factory which produces frp machines and frp products.
2.Q:Can you customize by customers requirements?
A:yes, we can produce the machine with customized size.
3.Q:How about the payment?
A:50% T/T in advance and the blance should be paid before delivery.
4.Q:What is the guarntee?
A:Gurantee is one year
5.Q:Can you provide training about water tank assembly?
A:yes ,we can provide training in our factory, we can also send engineers to your factory to offer training.

Beijing Jijingyuan Environmental engineering Co., Ltd is a leading manufacturer and supplier for water treatment, FRP relative products and air conditioner. We serving both national and international markets. Our company has been providing quality products since established.

In our large product line we offer water treatment equipment and products. FRP/fiberglass/GRP products and machines(FRP pipe winding machine, FRP tank winding machine, FRP grating machine, FRP pultrusion machine. FRP pipe, FRP tank, FRP grating and all kinds of profiles), air conditioner ect. We procure quality raw material to make this assortment of products. Our products are also highly liked by our clients.

Our target is "excellent quality, honesty, innovation and shared interest. " Our products are popular in domestic and abroad because of high quality, high efficiency, reasonable price and honest, speedy and considerate service.