JAC N-series Truck-high end light-duty truck
Fully using the domestic and international development resources, bringing in advanced designing conception and learning foreign advanced technologies, JAC high-end light-duty truck is suitable for various road conditions.
Exterior
The leading international high-end truck design concept of rigidity, mobility and cleanliness. Adopting design elements such as small angles of inclination and straight lines.

Interior

Performance
Continuous Improvement on the Suspension System
Using the new model plate spring (few leaf spring), the car can stay lightweight and will not reduce the load capacity, this will improve the durability.
The leaf spring uses secondary Peening technology, improving the metallurgical grade requirements for better strength and a longer life.
By using a disconnected large section frame, the strength has risen by 10%.
The use of a separation type chassis makes the vehicle stronger and gives it a better damping effect.
Equidistance holes, standard and flexible components installation.
The Improved Braking System
The exhaust brake decreases braking times to make the brakes more reliable and more safe, which also prolongs the braking system life span
The double brake loop design and front ventilated disc brake make the vehicle more reliable and safe.

Three-Level Reliable Test
With CAE analysis, bench tests and road tests, the vehicle has undergone three levels of reliability verification which powerfully guarantee the completed vehicle's safety; moreover, the vehicle has withstood accumulated 1,000,000km reliability tests in the conditions of high temperature, severe cold and high humidity.
Safety
The First Model Which Has Passed The Complete Vehicle Collision High-standard Test In China
Cab Security
To improve the passengers' security in the event of a frontal collision, the N Series truck cab design was, from the beginning, based on the cab nonlinear deformation collision theory, as well as on calculations and simulation analysis and forecast. The front part of the N Series truck cab's support plate longitudinal beam is designed as a close section, and high rigid steel is used as the longitudinal beam assembly material; moreover, the anti-collision girder steel is built inside the door, all of which fully guarantees the passengers' security.
Electromagnetic Exhaust Auxiliary Brake
When driving on mountainous roads or on a long decline, the exhaust auxiliary brake can utilize the retardation effect, release the brake system pssure and greatly improve your driving safety.

Model				HFC1042L3KT
Cab				Single
(L/R)Hand				L
	Overall Dimensions			5958*1725*2215
Size	Chassis Dimensions(mm)			5958*1725*2215
	Box size(inner)(mm)			4230x1790X400
	Wheelbase(mm)			3360
	Tread (front / rear )FT/RT (mm)			1440/1425
	FF/RF (mm)			1110/1525
	Chassis FF/RF (mm)			1110/1488
	Min Ground Clearance(mm)			190
	frame ground clearance H1 (mm)			691
	cab wide W1 (mm)			1725
Quality	GVW(Kg)			4490
Parameters	Curb Weight (Kg)			2560
	Play load(Kg)			1930
	Chassis Weight(Kg)			1980
	Front axle/Rear axle(Kg)			1525/1125
Performance	Max speed(Km/h)			100
Parameters	Maximum Gradeability(%)			30
	Min Turing Radius(m)			7
Main Configuration	Engine	Model		HFC4DA1-2B1
		Emission		III
		Type		Common Rail
		Max power(Kw/rpm)		80/3600
		Max torque(N·m/rpm)		240/2000-2200
		Displacement (cc)		2771
	Clutch	Type		Drysingleplatewithdiaphragmspring
		Diameter		Φ250
		clutch assistance type		vacuum assistance
		Model		LC5T255M3
		Gear Position		1 3 5
				2 4 R
	Transmission	Ratio	I	5.529
			II	2.513
			III	1.641
			IV	1
			V	0.785
			VI
			R	5.271
	Front Axle	Model		3000LD060
		Axle capacity(Kg)		≥2000
	Rear axle	Model		2400LD010
		Rear axle ratio		6.142
		Axle capacity(Kg)		≥4000
	steering	Steering		recirculating ball-type
		Power steering		√
	Suspension	Type		front/rear leaf spring
		Leaf spring number(front/rear)		7/4+6
		Rear axle		×
		stabilizer bar
	frame	Wf( front/rear)(mm)		671/700
		frame Section Size		170*65*5
	Oil tank	Fuel tank material		plastic
		Fuel tank capacity (L)		100
	Brake	Type		hydraulic brake
		Dryer		×
		Drum diameter		Φ320/Φ320
		Exhaust Braking		√
		SABS		×
		ABS		×
	Tire	Model		6.50R
				16 10PR
				7.00R
				16 12
				PR 205/75R
				17.5 12PR
	cargo	Iron cargo		×
		Bamboo cargo		√
	Electrical		Batteries	100A·h
			Alternator	14V 60A
			Starter	12V 2.8kw
Remark:√:Standard Equipment :Optional ×:Not Available

Introduction Of Shanghai Wanfa Automobile Sales&Service Co., Ltd.

Anhui Jianghuai Automobile Co., Ltd. (Hereinafter JAC) established in year 1964, takes up 4, 050, 000 square meters and owns fixed assets $US680 million and employs 30, 000 workers and engineers. Our stock was marketed in Shanghai Stock Exchange in Nov. 29, 2001, (Stock code: SH600418). JAC Shanghai Wanfa Automobile Sales&Service Co., Ltd. Was established in 2006, Shanghai, enjoying the ambitious purpose for global market development strategy. We play key roles in:

---Vehicles sale, updated vehicle info supply, communication and feedback for international users;

---International distributors and agents management, capability audit;

---Book shipping space, customs declaration and in sale service;

---Drivers and repairman training for international users;

---Vehicle corrective maintenance training for international users;

---Vehicle quality communication and feedback for international users;

---Other after-sales service and spot repair for vehicle failures.

Our Products Achievement and Rank:

We have international leading production base and production line, equipped with intelligent and standardized testing and controlling lab. All our products are designed, produced and controlled based on advanced technology and scientific management systym, therefore all our products win the governmental approval priority for legal sales in intense-competition domestic market.

Besides our technical advancement, JAC enjoys high market penetration ability and achieves great achievements: Our bus chassis sals volume has been keeping the primacy for decades in domestic market; REFINE brand commercial vehicle sale ranks the primacy in continuous 3 years; Light trucks sale ranks second in China; The increment rate of medium--SWORD brand and heavy truck--GALLOP brand ranks the primacy in China.

Location and Convenient Traffic:

Shanghai Wanfa Automobile Sales&Service Co., Ltd locates at No1699, Shuichan Road, Baoshan District, Shanghai, 201900, China

Welcome to take a sight seeing of JAC products to taste values of "considerate service, benefits share"! Our products will bring you cost-saving solutions and eye-catching returns!