500L syrup mixing tank 40~200rpm variable speed mixing tankMixing tanks can be designed in different capacity from 20liters to 5000Liters. most hot sell mixing tanks are 50Liters to 2000Liter. usually our stainless steel mixing tanks will be made by SS304 and SS316L materail to meet buyers different reqeust in milk, juice and syrup production.
304 stainless steek mixing tankis less expensive and easier to manufacture but also less resistant to strong chemical reagents. Stainless tanks are strong, rigid and more durable than poly and do not require a separate stand since their legs are welded as part of the tank itself.
316 stainless steel mixing tankis more expensive than 304 and more difficult to work with, but it is more resistant to corrosive chemicals and therefore more desirable for processes that call for very corrosive reagents. Stainless tanks are strong, rigid and more durable than poly and do not require a separate stand since their legs are welded as part of the tank itself.
Stainless steel Mixing Tank Bottom Head TypeAcone bottomis the most common process tank used when a bottom drain is required. It provides the best drainage of all bottom types. Approximately 15 degrees is standard. | |
Dish headersare used for both top and bottom heads, especially if the tank is to hold pssure. They are more expensive and take longer to produce, but they provide a smooth transition to the shell which is pferable for tanks that need a polished surface inside |
Aflat bottommay be used if the tank is to be free standing without legs, or if heat is to be applied to the bottom surface. A drain, if required, will be placed at the bottom of the shell. |
Use aslope bottomwhen the drain has to be in the side of the tank, but good drainage is still important. This is the least common bottom type. |
Stainless Steel Mixing Tank Customer Case
Customer request:High shear mixer on mixing tank 1000L with scraper agitator
With steam heating jacketed
tank body made of SS304
used to the pparation of syrup and cosmetic
Stainless Steel Mixing TankProduct specification Technical specification |
Working pssure | 0.3Mpa |
Design pssure | 0.35Mpa |
Working temperature | <170 degree C |
Design temperature | <180 degree C |
Working medium | Steam |
Material | SS304 inside / SS304 outside |
Volume | 1000Liter |
Mixing system | Scraper surface 4KW 36rpm |
Homo mixer 4KW 2800rpm |
Insulation | POLYURETHANE 50mm |
Hydrostatic test | 0.2MPA |
Stainless Steel Mixing Tank 1000LiterOrifice table |
No. | Size | Connection type | Usage |
N1 | Φ32 | Quick install | Material inlet |
N2 | Φ32 | Quick install | Air filter |
N3 | Φ32 | Quick install | Spare hole |
N4 | 1 1/2" | Flange | Steam inlet |
N5 | 1 1/2" | Flange | Condensate water outlet |
N6 | Φ50 | Quick install | Material outlet |
C | Φ32 | Quick install | Cleaning hole |
M | 400 | Quick open | Manhole |
E1-2 | 80 | ----------- | Sight glass |
T | M27×2 | Screw thread | Temperature gauge |
Please co
ntact our on line service team to get the drawing of this mixing tank
Other Details ofStainless Steel Mixing TankNo. | Usage | Tips |
1 | Emulsor motor | |
2 | Heat pservation dish end | |
3 | Jacketed dish end | |
4 | Inner layer dish end | |
5 | Scraper mixer | |
6 | Food-grade Teflon scraper | |
7 | PU insulation | |
8 | Outer shell | SS 304 |
9 | Jacketed shell | SS 304 |
10 | Inner wall contact to product | SS 304 |
11 | Support Ear | SS 304 |
12 | Sight glass | SS 304 |
13 | CIP cleaning ball | SS 304 |
14 | Gear reducer | |
15 | Manhole | 400mm diameter |
500L syrup mixing tank 40~200rpm variable speed mixing tank priceall of our mixing tanks are made of SS304 and SS316. Price of stainless steel 304 and 316 chnage time to time, the mixing tank price will be different. please co
ntact our o
nline sercive team for the latest price.