FRP GRP SMC sectional water storage tankBrief introduction
(1) factory direct selling.
(2)Specializing in the production of water tank more than 20 years.(3) Professional engaged in water tank design, production and installation.(4) food grade sheet molding compound panel.(5) Product diversification: SMC/FRP/GRP water tank, stainless steel water tank, hot dip galvanized water tank, etc.(6)Multiple sizes:1*2m, 1*1m, 1*0.5m, 0.5*0.5m,also can be customized according to customers requirement.(7)Wide application: as the storage equipment for drinking water, reclaimed water and fire water,water tank has widely used in mining, residential buildings, hotels, office buildings, schools, restaurants and other pu blic facilities.(8)water tank's thermal insulation: all kinds of water tank can were the thermal insulation coat to deal with temperature extremes.(9)Tank of different height uses different bottom panels, side panels and top panels strictly according to the assemble principle.(10)The assemble principle guarantees safety coefficient by reasonable saving of materials. It can serve more than 50 years.
Tensile strength Mpa | ≥70MPa |
Bending strength | ≥100 Mpa |
Barcol hardness | ≥60 |
Water absorption | ≤ 1.0% |
Fiber glass content | ≥25% |
Flexural Modulus of Elasticity | ≥ 5900MPa |
Sizes adaptable to any needs
From small tanks to large, Galvanized Steel water tank panels can fit virtually any order.Tank size are selectable to fit each need and desire, JJY tanks can be installed to handle from 0.25(M3) up to NOLINIT!
Concrete base &Steel Foundation
Concrete base (Standard)
Width: 300mm Height:600mm(Include Steel Skid) Space: Max 1m Outer Dimension: W+400mm
Horizontal Degree: 1/500
GRP SMC FRP sectional water storage tankSTEP-BY-STEP ASSEMBLY
Step 1. Install steel footings on leveled concrete foundations.
Step 2. Align GRP panels to be p-assembled.
Step 3. Place rubber sealant from ready-to-use roll between panels.
Step 4. Connect panels with bolts and nuts.
Step 5. Position bottom panel sections, and finish up base of tank.
Step 6. Position three sides of the tank.
Step 7. Position and fix roof panels and if required, roof support pipes and plates.
Step 8. Install reinforcement if required.
Step 9. Close up the tank with the fourth side.
Step 10. Finish the internal or external reinforcement.
Step 11. Fill and test.
Widely Applications
FRP tanks are suitable for use in the following applications.
1) Potable Water Storage (drinking water)
2) Rainwater Harvesting &Storage
3) Emergency Water Storage
4) Pump Chambers
5) Effluent/Acid and alkali solution treatment &Storage
6)hospital,buildings,building site, school and other place
Features of grp sectional water storage tank
1.Super Hygienic
In compliance with WRAS (Water Regulation Advisory Scheme) making with the quality of material which is hygienic passes ataste, ll and apoisonous etc. 5kind test being awater tank, was verified.
2. The capacity can be designed according to customer need.
Panels various sized can make the below tanks that utilize the most horizontal and perpendicular space and also can be erected from small capacity tank to huge tank.
Our company offers panel tanks from 0.25M3 up to amaximum of 1,500M3
3. Safety of Bottom Panel for Water Pressure
The convex panel can be the water pssure created by filling the tank seals the joint pventing leakage.
In other type tanks, water pssure can loosen the joint breaking the seal and allowing the stored water leak out.
4. Prevents Leakage
The joint are sealed with aspecial sealing tape.
It maintains soft itself and adhesives even at low temperature.
5. Complete Drainage
The conve xbottoms with aconcave drain panel system make sure complete and fast drainage.
It's very useful to take amaintenance inside of water tank.
Before-sale services:
(1) Tell customers how to use our products and matters needing attention.(2) Guide customers to choose the best and economic product, recover the investment within short time.
(3) Site inspection if you need.
In-Sale services:
(1)Quality control must be inspected strictly.
(2)In accordance with the agreements stipulated in the contract.
After-sale services:
(1) If the project needs our installation guidance, we can send our engineer and translator. We can also send customers installation video to teach them how to fix and operate with our product.
(2) Usually, our product warranty is 18 months after leaving factory or 12 months after installation. within this months, all parts broken will be responsible for our factory.(3) Regular contact with customer, consult with the customer feedback, come true with the customer's two-way communication.
Contact us
COMPANY NAME | Beijing Jijingyuan Environmental Engineering Co., Ltd. |
TEL (FAX) | 0086 -10 -83670801 |
ADDRESS | Unit 25, 9th Floor, Building 7, Section 4No. 188, West Road of South Fourth Ring Road, Fengtai District, Beijing, China |
Beijing Jijingyuan Environmental engineering Co., Ltd is a leading manufacturer and supplier for water treatment, FRP relative products and air conditioner. We serving both national and international markets. Our company has been providing quality products since established.
In our large product line we offer water treatment equipment and products. FRP/fiberglass/GRP products and machines(FRP pipe winding machine, FRP tank winding machine, FRP grating machine, FRP pultrusion machine. FRP pipe, FRP tank, FRP grating and all kinds of profiles), air conditioner ect. We procure quality raw material to make this assortment of products. Our products are also highly liked by our clients.
Our target is "excellent quality, honesty, innovation and shared interest. " Our products are popular in domestic and abroad because of high quality, high efficiency, reasonable price and honest, speedy and considerate service.
Disclaimer: China Truck Manufacturers.Com is not responsible for the accuracy, authenticity, or legality of any information posted by suppliers. China Truck Manufacturers.Com will not be involved in legal disputes arising from transactions between customers and suppliers. China Truck Manufacturers.Com is a platform which connects potential buyers to potential sellers. China Truck Manufacturers.Com is not responsible for disagreements and disputes; such disagreements will be negotiated or settled at the expense of the buyer or seller. China Truck Manufacturers.Com provides platform service for buyers and sellers instead of self-operated service.
Contact Information: If your legal rights are violated, you are welcomed to send an email to our in-box. For issues arising from infringements, complaints, please contact [email protected]