| Truck Specification | ||
| Truck model | CL5080TSL1 | |
| Cab | ISUZU 600P single row cabin | |
| Driving Type | 4*2 Left hand driving | |
| Max Speed (km/h) | 99 | |
| Overall dimension(mm) | 6335*2050*2680 | |
| GVW(kg) | 7300 | |
| Mass in working order(kg) | 5700 | |
| Wheelbase(mm) | 3815 | |
| F/R track base(mm) | 1504/1425 | |
| F/R overhang(mm) | 1015/1375 | |
| Approach/Departure Angel | 24/15 | |
| Tire | 6.50-16 (6+1) | |
| Clutch | Single-plate dry diaphragm spring clutch | |
| Steering | Hydraulic steering with power assistance | |
| Gear box | MSB 5-speed gear box | |
| Bridge | Front axle | 2.5T |
| Rear axle | 4.8T | |
| Enging | Model | 4KH1-TCG40 |
| Fuel Type | Diesel fuel | |
| Type | ISUZU Water-cooled four-stroke,, direct injection, turbocharged | |
| Exhaust(ml) | 2999 | |
| Max output power/rotate speed (hp /rpm ) | 120/2900 | |
| Max torque/rotate speed(N.m/rpm) | 290/1500 | |
| Brakingsystem | Service Brake | Oil brake |
| Park Brake | Spring energy | |
| Auxiliary brake | engine exhaust brake | |
| Eletric system | 24v | |
| Upper-Bodyspecification | ||
| Vice generator | ||
| Model | JX493-G3 | |
| Rated power (kw) | 57 | |
| Suction sweep operation | ||
| Cleaning efficiency | ≥95% | |
| The maximum diameter of the suction body(mm) | 120 | |
| Suction sweep width(mm) | 2.8-3.2 | |
| Maximum cleaningcapacity (m2/h) | 60000 | |
| Butterfly dish brush overhang dimension(mm) | ≥400 | |
| Working speed (km/h) | 3-20 | |
| Water tank body | ||
| Rated capacity(m3) | 1.0-1.5 | |
| Garbage tank body | ||
| Rated capacity(m3) | 3.5-4 | |
| Discharge door opening angle | ≥45º | |
| Hydraulic system | ||
| Model | Open, electrical control | |
| The main element | Gear pumps, hydraulic motors, hydraulic cylinders, solenoid valve | |
| Pressure (mpa) | 16 | |
| Hydraulic oil tank capacity(l) | 60 | |
| Hydraulic oil temperature (ºC) | 60 | |
| Electrical system | ||
| Model | DC24V | |
| voltage | 24V | |
| Battery | 24V(2 set 12 vbattery series connection) | |
| Sprinkle system | ||
| The main elements | Electric diaphragm pump, water filters, nozzles, etc. | |
| Sweeper disk device | ||
| Model | Center four sweeper disk, controlled by ahydraulic motor, front right can be independently controlled with avoidance and reset function | |
| Diameter (mm) | 850 | |
| Angel | Forward4-6ºroll 4-7º | |
| Sucker device | ||
| Model | Single suction port, hydraulically controlled, spring suspension. | |
| Diameter (mm) | 200 | |
| Truck Specification | ||
| Truck model | CL5080TSL1 | |
| Cab | ISUZU 600P single row cabin | |
| Driving Type | 4*2 Left hand driving | |
| Max Speed (km/h) | 99 | |
| Overall dimension(mm) | 6335*2050*2680 | |
| GVW(kg) | 7300 | |
| Mass in working order(kg) | 5700 | |
| Wheelbase(mm) | 3815 | |
| F/R track base(mm) | 1504/1425 | |
| F/R overhang(mm) | 1015/1375 | |
| Approach/Departure Angel | 24/15 | |
| Tire | 6.50-16 (6+1) | |
| Clutch | Single-plate dry diaphragm spring clutch | |
| Steering | Hydraulic steering with power assistance | |
| Gear box | MSB 5-speed gear box | |
| Bridge | Front axle | 2.5T |
| Rear axle | 4.8T | |
| Enging | Model | 4KH1-TCG40 |
| Fuel Type | Diesel fuel | |
| Type | ISUZU Water-cooled four-stroke,, direct injection, turbocharged | |
| Exhaust(ml) | 2999 | |
| Max output power/rotate speed (hp /rpm ) | 120/2900 | |
| Max torque/rotate speed(N.m/rpm) | 290/1500 | |
| Brakingsystem | Service Brake | Oil brake |
| Park Brake | Spring energy | |
| Auxiliary brake | engine exhaust brake | |
| Eletric system | 24v | |
| Upper-Bodyspecification | ||
| Vice generator | ||
| Model | JX493-G3 | |
| Rated power (kw) | 57 | |
| Suction sweep operation | ||
| Cleaning efficiency | ≥95% | |
| The maximum diameter of the suction body(mm) | 120 | |
| Suction sweep width(mm) | 2.8-3.2 | |
| Maximum cleaningcapacity (m2/h) | 60000 | |
| Butterfly dish brush overhang dimension(mm) | ≥400 | |
| Working speed (km/h) | 3-20 | |
| Water tank body | ||
| Rated capacity(m3) | 1.0-1.5 | |
| Garbage tank body | ||
| Rated capacity(m3) | 3.5-4 | |
| Discharge door opening angle | ≥45º | |
| Hydraulic system | ||
| Model | Open, electrical control | |
| The main element | Gear pumps, hydraulic motors, hydraulic cylinders, solenoid valve | |
| Pressure (mpa) | 16 | |
| Hydraulic oil tank capacity(l) | 60 | |
| Hydraulic oil temperature (ºC) | 60 | |
| Electrical system | ||
| Model | DC24V | |
| voltage | 24V | |
| Battery | 24V(2 set 12 vbattery series connection) | |
| Sprinkle system | ||
| The main elements | Electric diaphragm pump, water filters, nozzles, etc. | |
| Sweeper disk device | ||
| Model | Center four sweeper disk, controlled by ahydraulic motor, front right can be independently controlled with avoidance and reset function | |
| Diameter (mm) | 850 | |
| Angel | Forward4-6ºroll 4-7º | |
| Sucker device | ||
| Model | Single suction port, hydraulically controlled, spring suspension. | |
| Diameter (mm) | 200 | |
CLW GROUP is a big automobile manufacturing group located in SuiZhou City, HuBei Province, China, which collects together automotive technology research and development, automobile manufacturing, bus manufacturing, spare parts, finance, education and property investment. We won the honorary title of " China ′s well-known trademark ", " National high-tech enterprises " and "China top 500 private firms " and so on.
Chengli Special Automobile Co., Ltd is the biggest special automobile manufacturer in China. We produce the most varieties of special vehicles, such as water tank truck, garbage truck, sewage vacuum truck, septic(fecal ) suction truck, high pressure cleaning truck, sweeper truck, aerial platform truck, fire fighting truck, wrecker truck, dump truck, truck mounted crane, concrete mixer truck, , asphalt spray truck, synchronous chip sealer, van truck, refrigerator truck, advertisement truck, fuel/oil tank truck, chemical liquid tank truck, LPG tank, LPG tank truck, LPG tank trailer, LPG skid station, tractor, cargo truck and trailer, which are widely used in sanitation, civic utility, construction, petrochemical, logistic transportation and many other fields.
We have being in this field for over 14 years. We have designed more than 300 different items of special vehicles. Our workers are more than 5, 000. Our area of factory is more than 690, 000m2. Our annual sales reaches 476, 000, 000 dollars. Ours international certification includes ISO9001: 2008 quality management system certificate, ISO14001: 2004 environmental management system certificate, OHSAA18001: 2007 occupational health and safety management system, 3C, American society of mechanical engineers () certification, EU agreement, ADR certification.
With more than 14 years′ producing experience, we have successfully exported to Ghana, Sudan, Nigeria, Tajikistan, Namibia, Burma, Korea, Iran, Vietnam etc. Many Africa & Asia countries more than 4000 trucks every year.
Disclaimer: China Truck Manufacturers.Com is not responsible for the accuracy, authenticity, or legality of any information posted by suppliers. China Truck Manufacturers.Com will not be involved in legal disputes arising from transactions between customers and suppliers. China Truck Manufacturers.Com is a platform which connects potential buyers to potential sellers. China Truck Manufacturers.Com is not responsible for disagreements and disputes; such disagreements will be negotiated or settled at the expense of the buyer or seller. China Truck Manufacturers.Com provides platform service for buyers and sellers instead of self-operated service.
Contact Information: If your legal rights are violated, you are welcomed to send an email to our in-box. For issues arising from infringements, complaints, please contact [email protected]
