| Chassis Specification | |||
| Truck model | CLW5078JGKIS18F | ||
| Cab | ISUZU 100P double rows of seats cab, with air-conditional and USB connector radio. | ||
| Driving Type | 4*2 Left hand driving | ||
| Max Speed (km/h) | 95 | ||
| Overall dimension(mm) | Appro. 8400*1980*3100 | ||
| GVW(kg) | Appro. 6800 | ||
| Mass in working order (kg) | Appro. 6485 | ||
| Wheelbase(mm) | 3815 | ||
| Tire | 700-15 | ||
| Clutch | Single-plate dry diaphragm spring clutch | ||
| Steering | Hydraulic steering with power assistance | ||
| Gear box | MSB 5-speed | ||
| Bridge | Front axle | 2.5T | |
| Rear axle | 4.8T | ||
| Engine | Model | 4JB1CN | |
| Fuel Type | Diesel fuel | ||
| Emission Standard | Europe IV | ||
| Type | Water-cooled four-stroke,superchargedinter-cooling | ||
| Exhaust(ml) | 2771 | ||
| Max output power/rotate speed (hp /rpm ) | 98/3400 | ||
| Max torque/rotate speed(N.m/rpm) | 220/1700 | ||
| Braking System | Service Brake | Oil brake | |
| Park Brake | Spring energy | ||
| Electric system | 24v | ||
| Special Function | |||
| Working height (m) | 18 | ||
| Max working radius (m) | 8 | ||
| Boomtype | Three sectionsfolding working boom | ||
| Rated loading in the bucket(kg) | 200 | ||
| Bucket size(mm) | 1300*1000*1000 | ||
| Rotating speed (r/min) | 0-2 | ||
| Rotation angle | 360° | ||
| Supporting leg | foursetshydraulic legs | ||
| Horizontal | 3500mm | ||
| longitudinal | 4000mm | ||
| Boom control mode | 1.Bucket control2.Manual operation | ||
| Supporting legs | Four hydraulic supporting legs with manual operation | ||
| Features:1. Front H and rear H legs, good stability, which can be operated at the same time or independently, and adapt to a variety of working conditions.2. Computer controlled, automatic limit, alarming when in dangerous work, excellent safety performance.3. Witha monitor, real-time display of the vehicle operating conditions.4. Hexagonal working arm, synchronization telescope, compact structure, high efficiency and wide operating range.5. Externaltelescopic cylinder, chain telescopic mechanism, easier to observe the fault point, convenient maintenance.6. The vehicle has twooperationways : platform operationand operatingon the groundwhich issafe,reliableandhigh efficiency.7. Slewing mechanism adopts adjustable type,which iseasy to adjust.8. Non-slip body9. Toolbox (2 pieces) | |||
| Chassis Specification | |||
| Truck model | CLW5078JGKIS18F | ||
| Cab | ISUZU 100P double rows of seats cab, with air-conditional and USB connector radio. | ||
| Driving Type | 4*2 Left hand driving | ||
| Max Speed (km/h) | 95 | ||
| Overall dimension(mm) | Appro. 8400*1980*3100 | ||
| GVW(kg) | Appro. 6800 | ||
| Mass in working order (kg) | Appro. 6485 | ||
| Wheelbase(mm) | 3815 | ||
| Tire | 700-15 | ||
| Clutch | Single-plate dry diaphragm spring clutch | ||
| Steering | Hydraulic steering with power assistance | ||
| Gear box | MSB 5-speed | ||
| Bridge | Front axle | 2.5T | |
| Rear axle | 4.8T | ||
| Engine | Model | 4JB1CN | |
| Fuel Type | Diesel fuel | ||
| Emission Standard | Europe IV | ||
| Type | Water-cooled four-stroke,superchargedinter-cooling | ||
| Exhaust(ml) | 2771 | ||
| Max output power/rotate speed (hp /rpm ) | 98/3400 | ||
| Max torque/rotate speed(N.m/rpm) | 220/1700 | ||
| Braking System | Service Brake | Oil brake | |
| Park Brake | Spring energy | ||
| Electric system | 24v | ||
| Special Function | |||
| Working height (m) | 18 | ||
| Max working radius (m) | 8 | ||
| Boomtype | Three sectionsfolding working boom | ||
| Rated loading in the bucket(kg) | 200 | ||
| Bucket size(mm) | 1300*1000*1000 | ||
| Rotating speed (r/min) | 0-2 | ||
| Rotation angle | 360° | ||
| Supporting leg | foursetshydraulic legs | ||
| Horizontal | 3500mm | ||
| longitudinal | 4000mm | ||
| Boom control mode | 1.Bucket control2.Manual operation | ||
| Supporting legs | Four hydraulic supporting legs with manual operation | ||
| Features:1. Front H and rear H legs, good stability, which can be operated at the same time or independently, and adapt to a variety of working conditions.2. Computer controlled, automatic limit, alarming when in dangerous work, excellent safety performance.3. Witha monitor, real-time display of the vehicle operating conditions.4. Hexagonal working arm, synchronization telescope, compact structure, high efficiency and wide operating range.5. Externaltelescopic cylinder, chain telescopic mechanism, easier to observe the fault point, convenient maintenance.6. The vehicle has twooperationways : platform operationand operatingon the groundwhich issafe,reliableandhigh efficiency.7. Slewing mechanism adopts adjustable type,which iseasy to adjust.8. Non-slip body9. Toolbox (2 pieces) | |||
CLW GROUP is a big automobile manufacturing group located in SuiZhou City, HuBei Province, China, which collects together automotive technology research and development, automobile manufacturing, bus manufacturing, spare parts, finance, education and property investment. We won the honorary title of " China ′s well-known trademark ", " National high-tech enterprises " and "China top 500 private firms " and so on.
Chengli Special Automobile Co., Ltd is the biggest special automobile manufacturer in China. We produce the most varieties of special vehicles, such as water tank truck, garbage truck, sewage vacuum truck, septic(fecal ) suction truck, high pressure cleaning truck, sweeper truck, aerial platform truck, fire fighting truck, wrecker truck, dump truck, truck mounted crane, concrete mixer truck, , asphalt spray truck, synchronous chip sealer, van truck, refrigerator truck, advertisement truck, fuel/oil tank truck, chemical liquid tank truck, LPG tank, LPG tank truck, LPG tank trailer, LPG skid station, tractor, cargo truck and trailer, which are widely used in sanitation, civic utility, construction, petrochemical, logistic transportation and many other fields.
We have being in this field for over 14 years. We have designed more than 300 different items of special vehicles. Our workers are more than 5, 000. Our area of factory is more than 690, 000m2. Our annual sales reaches 476, 000, 000 dollars. Ours international certification includes ISO9001: 2008 quality management system certificate, ISO14001: 2004 environmental management system certificate, OHSAA18001: 2007 occupational health and safety management system, 3C, American society of mechanical engineers () certification, EU agreement, ADR certification.
With more than 14 years′ producing experience, we have successfully exported to Ghana, Sudan, Nigeria, Tajikistan, Namibia, Burma, Korea, Iran, Vietnam etc. Many Africa & Asia countries more than 4000 trucks every year.
Disclaimer: China Truck Manufacturers.Com is not responsible for the accuracy, authenticity, or legality of any information posted by suppliers. China Truck Manufacturers.Com will not be involved in legal disputes arising from transactions between customers and suppliers. China Truck Manufacturers.Com is a platform which connects potential buyers to potential sellers. China Truck Manufacturers.Com is not responsible for disagreements and disputes; such disagreements will be negotiated or settled at the expense of the buyer or seller. China Truck Manufacturers.Com provides platform service for buyers and sellers instead of self-operated service.
Contact Information: If your legal rights are violated, you are welcomed to send an email to our in-box. For issues arising from infringements, complaints, please contact [email protected]
