SY5332THB520C-8S
Sany SY5332THB520C-8S 49 truck-mounted concrete pump has 49m vertical reach with the height limit programmed to pvent boom contact with an obstruction or overhead hazard. The 49m concrete pump provides the users reliable pumping performance along with the highly wear resistant parts including delivery pipe, discharge port, transition Bushing, concrete piston, wear plate, cutting ring and delivery cylinder that improve the pumping efficiency and reduce down time.
One Button Stabilization Technology
The one button stabilization technology quickly dampens any boom movement resulting from repositioning the boom. This allows pcise positioning of the end hose.
Boom Anti Vibration Technology
The boom anti vibration technology reduces vibration during pumping by 50% allowing less movement and greater control of the end hose.
Energy Saving Technology
With cycle times of up to 29 per minute (at 12MPa), pump efficiency is increased up to 25% while fuel consumption is decreased by up to 10%.
Anti Overswing Technology
By adopting our new swing brake technology, the boom's overswing amplitude is reduced by 60%
Fault Self Diagnostic Technology
Continually monitors more than 200 aspects of the system during operation. Faults are displayed on the monitor. Review of the detected faults can reduce troubleshooting time by 70%.
Smart Boom System
One Button Boom Extend/Retract
Press upward on the boom extend/retract button to extend the boom or pss downward to retract the boom automatically.
Coordinated Section Operation
The boom can be rapidly and accurately repositioned by coordinating the movement the first and second sections
Safety Technology
Boom Overload Protection Technology
Relief valves are mounted on the boom cylinder counterbalance valves. These valves will release pssure in the event of excessive boom load to pvent damage to the boom.
Hopper Screen Interlock Technology
As an operator protection measure, the pump will automatically stop when the hopper screen is opened.
Hydraulic Oil Level Monitoring
The oil level in the hydraulic reservoir is continually monitored. If the level drops below a pset level, an alarm will sound and the pump will be stopped to pvent damage to the hydraulic system.

Brand		Sany
Chassis Brand		MercedesBenz3341
Model		SY5332THB520C-8S
Released date		2014
Fob price(Appciated with customer proposal and negotiation price)		USD311000
Chassis	Cabin	Benz Actros3341
	Drivemode	6*4
	Engine model	OM501LA
	Emission standard	Euro4/11.946L
	Max output power(Kw/rpm)	300/1800
	Max torque(N·m/rpm)	2000/1800
	Transmissionmodel	G240-16
	Rear axle: ratio/loading capacity	HL7500,5.33/16tons
	Braking system	Full air,dualcircuit
	Wheelbase(mm)	3780+1450
	Tire	385 65R 22.5
	GVW(Kg)	33000
	Overall dimension(mm)	11195*2500*4000
Boom&Pump system	Vertical reach	49m/5 section
	Pipe size	125mm
	End Hose(L*D)	3000*125mm
	Output (Low/High-pssure)	170/120m³/h
	Pressure (Low/High-pssure)	8.3/12 Mpa

Construction case
SY5332THB520C-8S, the first Sany truck mounted pump in Morocco, was owned by Modern Contracting SARL, one of the biggest contractors in this North African country. This model of Sany truck mounted pump was used in the construction of the 5000 seats Economic House in Aïn Sebaâ of Casablanca, which was invested by the biggest Moroccan real estate company Groupe Addoha, and was constructed from Feb 2006 until Dec 2009.
Impssed by the high performance of SY5332THB520C-8S as well as the considerate after-sale service of Sany engineers, Modern Contracting SARL purchased another 5 units of Sany truck mounted concrete pumps, which were placed in service for the construction of Groupe Addoha's project "New City" in Rabat, capital of Morocco, in October 2008.

Hunan Teila Heavy Industry Machinery Service Co., Ltd is a importing and exporting company, it was originated in Heny group which was founded in 2010 Changsha city Hunan province.

Today, it is number one for re-manufacturing concrete pump machinery/Truck Mounted Concrete Pump/Truck Mixer/Trailer Pump/Concrete Batching Plant/others heavy duty machine and genuine accessories in China. Our plants covering an area of 40000 square meters, there are 1500 staffs in our group and annual sales volume exceed 0.1 billion USD.

Our business network covers the whole mainland, and has exported to Asia, Europe and America such as Vietnam, Indonesia Cambodia, Singapore, Pakistan, Egypt and other countries.

We keep Integrity and innovation in heart forever, keep pursuit the 1st class one stop service providers, and set up top class enterprise.

Thanks,

Best wishes.

Overseas marketing director: Bruce

Tel: +86-18153792825