FRP tank automatic winding machine
It can produce small-size FRP pipes and tanks. It has been matched the mould-unloading machine and forming set. Its main properties are below.

The max diameter can be wound: DN1500mm
The max length can be: 6000mm
The range of diameter: DN25-1500mm
The winding angle:45°-90°
The total power: 5.5KW
The maxi width of roving sheet: 150mm
The productivity: 450Kg/h.



Equipment Structure and Characteristics
1) Under the condition of meeting the requirement of performance and quality, conducting the layout and design conveniently and smoothly.
2) The key function of each single machine is controlled by single electric control, with the work state unaffected.
3) Resin Mixing tank and automatic material transport system increase work efficiency.
4) Whole digital controlled winding operation system is adopted; the winding process is automatically finished. .If the main axis stops at the middle of production, the vehicle is also stoppedcorrespondingly, when the main axis will turn round back, at the same time the vehicle is also comeback too.
5)57.5°is the best pipe winding angle.
Transportation
After trial production in our workshop, the equipment will be disassembly to suitable to transportation. Try best to disassembly the equipment to small parts, so as to put them into 20" or 40" Container. That will be convenient for landing and sea transportation.

Shijiazhuang JHR Import & Export Co., Ltd. is a leading manufacturer of FRP relative products. Now we mainly focus on researching and developing FRP products production lines. At present, we can supply advanced FRP pipe and tank production line, pultrusion production line, and membrane housing production lines. We not only supply these equipment, but also supply processing technical support. Our 3-axis all-in-one filament winding machine is very popular in the world.

We are also in charge of installation, engineering and maintenance service. With so many years of technological know-how, we are in capacity of manufacturing according to special design request, and aiming to supply high-quality and good performance FRP products, such as pressure vessel, pipe, cooling tower, ventilation fan, profile, grating and so on.

Our factory has obtained ISO9001: 2000 Quality System Certification, British Royal UKAS Certificate, ISO14001 Certification, ISO1800 Certification and National Grade II Installation Certification of Anti-corrosion. Because of the request of domestic and international markets, we constantly challenge with new technological development and provide high quality and reliable products and service.