injectors diesel 095000-6510 kubota injectors whosale
#injectors diesel#
#kubota injectors#
#injectors diesel & kubota injectors whosale#
CHINA-LUTONG is specialize in providing high quality common rail injectors.
The merits of the common rail fuel injection system architecture have been recognized since the development of the diesel engine.Lower fuel pump peak torque requirements. As high speed direct injection (HSDI) engines developed, more of the energy to mix the air with fuel came from the fuel spray momentum as opposed to the swirl mechanisms employed in older, IDI comBustion systems. only high pressure fuel injection systems were able to provide the mixing energy and good spray preparation needed for low PM and HC emissions. To generate the energy required to inject the fuel in approximately 1 millisecond, the conventional distributor pump would have to provide nearly 1 kW of hydraulic power in four 1 ms bursts per pump revolution, thus placing considerable strain on the drive shaft. One of the reasons behind the trend toward common rail systems was to minimize the maximum pump torque requirement. While the power and average torque requirements of the common rail pump were similar, high pressure fuel delivery is to an accumulator and thus the peak flow rate (and peak torque required to drive the pump) does not have to coincide with the injection event as is the case with the distributor pump. Pump discharge flow can be spread out over a longer portion of the engine cycle to keep pump torque demand more even.
Improved noise quality. DI engines are characterized by higher peak combustion pressures and, thus, by higher noise than IDI engines. It was found that improved noise and low emissions were best achieved by introducing pilot injection(s). This was most easily realized in the common rail system, which was capable of stable deliveries of small pilot fuel quantities over the entire load/speed range of the engine.
injector sales |
injector suppliers |
injector toyota |
Injector Truck |
injector volkswagen |
injector vw |
injector with nozzle |
injectors |
Injectors & Components |
injectors bosch common rail diesel |
injectors cummins |
injectors cummins review |
injectors diesel |
injectors dodge cummins |
injectors for 5.9 cummins |
Isuzu Replacement Injectors |
John Deere Diesel Injector |
john deere fuel injector |
john deere fuel injectors |
John Deere Injector |
John Deere injectors |
john deere injectors diesel |
kia diesel injectors |
kia fuel injector |
kia injectors |
kubota fuel injectors |
kubota injector rebuild |
kubota injectors |
mechanical diesel injector |
mechanical injection injectors |
E-mail:fuelinjectionparts @ hotmail.com |
WhatsApp:+8613666931970 |
QQ :2850613608 |
FM GAO |
China Lutong Parts Plant is a manufacturer specialist in diesel engine parts.The majored products is Head Rotor(VE Pump Parts) Nozzle,Plunger,Delivery Valve and so on .As a elder manufacturer for diesel engine parts, we keep step with the international standard and technics. And we absorb the advanced producing and testing technic . The quality of our products are in the same class with other overseas famous manufacturers.
Disclaimer: China Truck Manufacturers.Com is not responsible for the accuracy, authenticity, or legality of any information posted by suppliers. China Truck Manufacturers.Com will not be involved in legal disputes arising from transactions between customers and suppliers. China Truck Manufacturers.Com is a platform which connects potential buyers to potential sellers. China Truck Manufacturers.Com is not responsible for disagreements and disputes; such disagreements will be negotiated or settled at the expense of the buyer or seller. China Truck Manufacturers.Com provides platform service for buyers and sellers instead of self-operated service.
Contact Information: If your legal rights are violated, you are welcomed to send an email to our in-box. For issues arising from infringements, complaints, please contact [email protected]