3 Axles Heavy Duty LPG Gas Tanker Semi Trailer 59CBM (Liquefied Petroleum GasPropane , Isobutane, Dimethyl Ether)
Liquid gasTank Semi Trailer
Three Axles,13units 12R22.5 tires
Tank volume 59000Liters
Rated loading 24800-30000kg

Net Weight 15200kg

Photos:

ItemDTA9401GYQ		Unit	Parameter
Product name			3 axle semi-trailer
Practical capacity		M3	59.05
Gross weight		kg	40000
Curb weight			15200
rated loading capacity			24800-30000kg
Overall dimension		mm	12965 * 2500 * 3990
Axle			3
Wheelbase			7970 +1310 +1310
Tread	Front tread		-
	Rear tread		1840/1840/1840
Front/rear suspension		mm	-/1450
Leaf spring			-/8/8/8 , -/10/10/10
Fifth wheel max loading		kg	16000
Tyre specification		12	12R22.5/11.00R20
Exclusive configuration	Tank material	Q345R
	Standard configuration	13T axle, safety valve,single fluid two valve box.hydraulic legs,traction pin,liquid Indicator,pssure gauge,temperature gauge,emergency cut-off valve,valve box,fire suppssion bottle,spark hider cover,anti static grounding tape,protective guard,tyre protective shield.
	Other	Filling Medium:propane;design pssure 1.77Mpa,design temperature 50°C,filling ratio:0.42t/m3,corrosion allowance:1mm;dimension of tank:12850×2496mm .
	Standard configuration	GB150-1998<Steel pssure vessels>,Supervision regulation on safety technology for pssure vessel,Supervision regulation on safety technology for Liquefy gas tank truck.
Shanghai price

Tank Body	MaximumWorkPressureMpa		1.61
	Design PressureMpa		1.61
	Design Temperature ºC		-40 to 50
	Loading weight per unit capacity kg/L		0.42
	Capacity m3		59.05
	Loading medium		LPG
	Medium characteristics		Moderate Harm
	Body material	shell mm	Q345R
		headmm	Q345R
	Corrosion allowance	shell mm	2
		headmm	2
	Negative deviation ofthickness	shell mm	0
		headmm	0.3
	Welded joint coefficient		1
	hydraulic test pssure Mpa		2.1
	Design service life		15 years
	Heating method		Integrally annealing
Safety Valve	Type		Built-in spring full-open type
	Specification		PN4.0 DN50
	Set pssure Mpa		2.13
Liquid Level Meter	Type		Floating ball rotation
	Range m		0~2.38
	Nominal psure Mpa
Pressure Gauge	Dial diameter mm		≥100
TIRES	12R22.5 12PR		12pcs

Liquefied Petroleum Gas.

Filling Medium	Liquefied Petroleum Gas (propane)
Medium Density	420-590 kg/ cbm
Design Temperature(ºC)	Under 50ºC
Water PressureTest(MPa)	2.1Mpa / 21 Bar
Design Pressure(MPa)	1.61 Mpa / 16.1 Bar
Corrosion Allowance(mm)	1mm
Material of Main Parts	Tanker body: Q345,12mm,
	Tanker End plate:Q345R,12mm
	Main beam:16Mn
Heat Treatment	Overall treatment in a furnace,600ºC to 640 ºC
Flaw Detection	100% Flaw detectionwith X-ray
Manhole (Size asCustomer's Requirement)
Quantity	1xDN450mm on top
Safety Valve(As Customer's Requirement)
Quantity	1 piece
Location	On the top of tanker
Size	DN100
Level Gauge
Type	Hand Rotation Level Gauge
Location	At the rear ofthe end plate
Wheeling System
Axles	3*13Ton FUWABrand
Leaf Spring	10-piece, 6 sets
Suspension	Heavy DutyMechanical Suspension
Tire	12R22.5 Tubeless tire,13including one spare tire
Landing leg	JOSTBrand
King Pin	JOST Brand 2"
Pneumatic Braking System	WABCO RE 4relay valve; T30/30+T30 Spring brake chamber; 40L air tanks.
Safety Control System
Emergency Cut-off Valves	2 pcs, DN25×1 for gas phase,DN50×1 for liquid phase
Ball Valve	4pcs,DN25×2 for gas phase,DN50×2 for liquid phase
Liquid Gauge	1piece
Thermometer	2 piece
Pressure Gage	2 piece
Accessories
Small Tool Box	1piece
Wheel Carrier	2pcs
Fire Extinguisher	4 pcs
Mud Guard	6 pcs
Tanker Paint	Color or Logo painted as requirement

Model	9400GYQ		Liquid AmmoniaTank semi trailer
	Items		Data
Transport Semi-Trailer	Curb Weight		~15510kg/ air suspension ~16080 kg/spring suspension
	Rated Loading Weight		23900kg;24750kg;25000kg
	Maximum Gross Weight		~40000kg
	Front Fitting Radius mm		1710mm
	Interstice Radius mm		2300mm
	Wheel base mm		5290+1310+1310; 6020+1310+1310; 6200+1310+1310; 6940+1310+1310
	Minimum Ground Clearance mm		320mm-540mm
	Water Pressure Mpa		2.49Mpa
	Airtight Test Pressure Mpa		1.91Mpa
	Stroke Of Support Unit mm		483mm
	King Pin Diameter Mm		φ50; φ90;
	Dimension(L×W×H) mm		11845x2500x3850; 11505×2500×3940; 12606×2500×3750; 12000×2500×3900mm
Tank Body	Maximum Work Pressure Mpa		1.91
	Design Pressure Mpa		1.91
	Design Temperature ºC		-19ºC to 50ºC
	Loading weight per unit capacity kg/L		0.52-0.53 ( 530kg/m3)
	Tank Capacity m3		46M3; 46.7M3;
	Loading Medium		Liquid Ammonia
	Medium Characteristics		Moderate Harm
	Body Material	Shell mm	Q345R13.95~14mm
		Head mm	Q345R13.92~14mm
	Corrosion Allowance	Shell mm	2
		Head mm	2
	Negative Deviation OfThickness	Shell mm	0
		Head mm	0.3
	Welded Joint Coefficient		1
	Hydraulic Test Pressure Mpa		2.49
	Design Service Life		15 Years
	Heating Method		Integrally Annealing
Safety Valve	Type		Built-In Spring Full-Open Type
	Specification		DN80
	Set Pressure Mpa		2.13
Liquid Level Meter	Type		Floating Ball Rotation
	Range m		0~2.38
	Nominal Presure Mpa
Pressure Gauge	Dial Diameter mm		≥100
	Accuracy		Level 1.6
	Range Mpa		0~4.0
1. Manhole Quantity One Dimensions 450mm IdDN450 Specification Q345R ; Bolted Type (24x M24) Gasket PTFE 2. Safety Relief Valve Assembly Quantity One DN80 Gasket PTFE Location Top Of The Tank. 3. Gas Line Dimensions DN25 Gasket PTFE 4. Liquid Line Dimensions DN50 (2") Gasket PTFE

Pressure Vessel Liquid Ammonia Storage Tank 10CBM-100CBM Anhydrous Liquid Ammonia (Liquid NH3)

	Tank	Volume (m³)	loading mass (ton)	standard and configuration
1	Liquid ammonia tank	10	5.2	Execution standard: GB150 "pssure vessel" and "fixed pssure vessel safety technology and supervision code" design pssure: 21.6 design temperature: 50 ° c filling ratio: 0.52 corrosion allowance: material: 2 mm subject Q345R
2		20	10.4
3	Liquid ammonia tank	25	13
4		32	16.64
5	Liquid ammonia tank	50	26
6		60	32.2
7	Liquid ammonia tank	80	41.6
8		100	46.8

Butane Tank Horizontal Storage 40m3 (Pressure Vessel ) for LPG Gas Propane, Liquid Sulfur Dioxide, Isobutane, Dimethyl Ether


Propane design pssure of 1.77 MPa design temperature 50 ºC corrosion allowance 1 mm density of 0.42 T/M3

Design of liquid ammonia pssure of 2.16 MPa design temperature 50 ºC corrosion allowance 2 mm density of 0.52 T/M3

Propane design pssure of 1.77 MPa design temperature 50 ºC corrosion allowance 1 mm density of 0.42 T/M3

Propane design pssure of 2.16 MPa design temperature 50 ºC corrosion allowance 1 mm density of 0.43 T/M3

Liquid sulfur dioxide design pssure of 0.98 MPa design temperature 50 ºC corrosion allowance 4 mm density of 1.2 T/M3

Gas pssure is 4.1 MPa design temperature 50 ºC corrosion allowance of 1.4 mm

Propane design pssure of 1.77 MPa design temperature 50 ºC corrosion allowance 1 mm density of 0.42 T/M3

Isobutane design pssure of 0.79 MPa design temperature 50 ºC corrosion allowance 1 mm density of 0.49 T/M3

Dimethyl ether design pssure of 1.15 MPa design temperature 50 ºC corrosion allowance 1 mm density of 0.58 T/M3

Product Model	T-LPG-TK
Structural form	Integral type, separated type
Install Method	Above-ground,
System ApproachOPTIONAL:	Double pump system, single pump system
Storage Tank Volume(M3;)	5, 6, 10,15,20, 30 , 40 , 50 , 60,80, 100 , 125, 150
Design pssure of storage tank	1.77Mpa
Design pssure of pipe	2.5Mpa
Opening pssure of safety valve	1.75Mpa
Ambient Temperature	-40-55°C
Ambint Humidity	10~95%
Dimension of skid-mounted body	Up to customer's requirement

Horizontal Storage HCL Acid Tanks Steel Lined LDPE 120000 Liters

For Storage Bleach, Hydrochloric Acid, Ferric Chloride, Oilfield Chemicals, Corrosive Wastes And Other Hazardous Cargoes.

Steel ( 6 mm -8mm ) Lined PE - Plastic 7042 (16mm - 20 mm )storage tank

storage hydrochloride, hydrogen chlorate, sodium hydroxide,acrylic

acetic acid, glacial acetic acid, hydrogen peroxide

Propionic acid, ammonia,NH3·H2O

other tanks

Horizontal Oil Tank	Horizontal Oil Tank
	SS Double Oil Tank
	SF Double Oil Tank
Industrial Condenser	U shape Condenser
	Tubular surface condenser
Reaction Tower	Pressure Reactor
	Pyrolysis Reactor

Horizontal Fuel Storage Tank Cbm For Petroleum Oil,Gasoline, Petrol, Diesel Steel Q235 or Q345 .Q245.R20 thinckness 5.6.8mm - 10.12mm Custermizing 1-100CBM



Acid Storage Tank for Oil Fied Chemical Contain Hydrochloric Acid 120CBM Horizontal

Used to contain: HCl (max 35%), NaOH (max 50%), NaCLO (max 10%), PAC (max 17%), H2SO4 etc


Horizontal / Vertical Storage HCL Acid Tanks Steel Lined LDPE 120000 Liters
For Storage Bleach, Hydrochloric Acid, Ferric Chloride, Oilfield Chemicals, Corrosive Wastes And Other Hazardous Cargoes.
Steel ( 6 mm -8mm ) Lined PE Plastic 7042 (16mm - 25 mm ) storage tank

water tank	stainless steel tank /water pump/ High pssure squirt gun
steel option	Q235/Q345/ 16 manganese steel/SS201/SS304 /SS316 alummin alloy tanker
acids tanker	steel lined plastic for water/alcohol/ethanol acid, alkaline and salt HCL, NaOH ,NaCIO Sodium Hypochlorite NaCIO /hydrofluoric acid HF/CAUSTIC SODA alummin nitric acid
oil/petrol,Fuel diesel/LPG/LNG	steel tank with oil pump/ gun fuel truck nozzle
asphalt/bitumen/crude oil tanker/ AN ammonium methana Alcohol	burner/steam heating and insulation system ,pump option

VerticaltypePEPlastictank

Capaicty	Shelllength	Totallength	Diameter	Weight	Shellthickness	EXWPrice
1m3	750mm	930mm	1300mm	95(KG)	15mm	$1355~$2060
2m3	1800mm	1980mm	1300mm	150(KG)	15mm	$1565~$2260
5m3	1100mm	1400mm	2400mm	260(KG)	15mm	$1880~$2560
10m3	2200mm	2500mm	2400mm	500(KG)	20mm	$2508~$3560
15m3	3300mm	3600mm	2400mm	680(KG)	20mm	$3850~$5560
20m3	4400mm	4700mm	2400mm	850(KG)	22mm	$5480~$7180
30m3	4400mm	5040mm	3000mm	1350(KG)	25mm	$6490~$8190
40m3	4900mm	5500mm	3450mm	2000(KG)	32mm	$6860~$8560
50m3	6000mm	6600mm	3450mm	2300(KG)	32mm	$11520~$13920

5 cbm/m3	Q235A5mm+ PE(Plastic )16mm	US$7,200.00
10 m3	Q235A5mm+PE16mm	US$9,200.00
20 m3	Q235A5mm+PE16mm	US$11,200.00
30	Q235A6mm+PE16mm	US$13,200.00
40	Q235A6mm+PE16mm	US$15,200.00
50	Q235A6mm+PE16mm	US$17,200.00
60	Q235A6mm+PE16mm	US$19,200.00
70	Q235A6mm+PE16mm	US$21,200.00
80	Q235A8mm+PE16mm	US$23,200.00
90	Q235A8mm+PE16mm	US$25,200.00
100	Q235A8mm+PE16mm	US$27,200.00
110	Q235A8mm+PE16mm	US$29,200.00
120	Q235A8mm+PE16mm	US$30,800.00
130	Q235A8mm+PE16mm	US$32,400.00
135	Q235A8mm+PE16mm	US$34,400.00

manufacturer, supplier and exporter ofAcid Storage Tank inChina. Storage Tanks are widely used for storing chemicals and acids and can be availed in various models such as horizontal and vertical. These tanks are equipped with best quality stainless steel material and mild steel, extensively used in various industries - such as pharmaceutical, sugar, food and dairy. This storage tank is widely in demand and accepted by our clients.

Being a quality centric organization, our product line includesPlastic Storage Tank, Chemical Storage Tank, Horizontal Storage tank, Bottom Conical Storage Tank and many more. The manufactured range of Acid Storage Tanks is available to the clients in different sizes using high quality design and welding standards. Storage tanks are mostly appropriate for over ground and underground installations and can be used to store acids in safe and secure way.

we cater to the bulk requirements of the clients and strive to offer the best quality products manufactured in compliance with international standards. We have been able to mark our strong foothold as one the leading Manufacturer of Acid Storage Tanks from China

LDPE & HDPE polyethylene resistance listed by chemical
1.4-dioxane LDPE and HDPE at 20C° show little or no damage after 30 days of constant exposure. LDPE at 50C° shows
some effect after 7 days of constant exposure.
Acetaldehyde LDPE and HDPE at 20C° show little or no damage after 30 days of constant exposure. HDPE at 50C° shows
some effect after 7 days of constant exposure. LDPE - immediate damage may occur.
Acetic Acid 5 % LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Acetic Acid, glacial 50% LDPE and HDPE at 20C° show little or no damage after 30 days of constant exposure. LDPE at 50 C° -
immediate damage may occur.
Acetone LDPE and HDPE at 20C°-50C° - damage may occur. Not recommended for continuous use.
Allyl Alcohol LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Aluminum salts LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Amino acids LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Ammonia LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Ammonium carbonate,
saturated LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Ammonium phosphate LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Ammonium sulphate LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Amyl chloride HDPE at 20C° shows some effect after 7 days of constant exposure. HDPE at 50C° and LDPE at 20C°-50C° -
immediate damage may occur. Not recommended for continuous use.
Aniline LDPE and HDPE at 20C° show little or no damage after 30 days of constant exposure. HDPE at 50C° shows
some effect after 7 days of constant exposure.
Benzene LDPE and HDPE at 20C°-50C° - damage may occur. Not recommended for continuous use.
Benzyl alcohol LDPE and HDPE at 50C° - immediate damage may occur. HDPE at 20C° shows some effect after 7 days of
constant exposure.
Boric acid LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Bromine LDPE and HDPE at 50C° - immediate damage may occur. HDPE at 20C° shows some effect after 7 days of
constant exposure.
Butyric acid LDPE and HDPE at 50C° - immediate damage may occur. HDPE at 20C° shows some effect after 7 days of
constant exposure.
Calcium chloride LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Calcium hydroxide
saturated LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Calcium sulphate No data is available at this time.
Carbon tetrachloride HDPE at 20C° shows little or no damage after 30 days. LDPE at 20C° and HDPE at 50C° show some effect
after 7 days of constant exposure. LDPE at 50C° not recommended.
Chlorobenzene Immediate damage may occur. Not recommended for continuous use.
Chloroform HDPE and LDPE at 20C° show some effect after 7 days. At -50C° - immediate damage may occur. Not
recommended for continuous use.
Chlorine 10% in water HDPE and LDPE at 20C° shows little or no damage after 30 days. LDPE at 50C° shows damage and is not
recommended.
Chromic acid 10% LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Chromic acid 50% LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Citric acid 10% LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Cresol HDPE at 20C° shows some effect after 7 days. LDPE at 20C°-50C° and HDPE at 50C° show immediate
damage and are not recommended for continuous use.
Cyclohexane LDPE and HDPE at 50C° - immediate damage may occur. HDPE and LDPE at 20C° show some effect after 7
days of constant exposure.
Diethyl ketone LDPE and HDPE at 20C°-50C° - damage may occur. Not recommended for continuous use.
Dimethylsulfoxide LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Ethanol 95% LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure. Ethyl acetate LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Ethyl benzene HDPE at 20C° shows some effect after 7 days. LDPE at 20C°-50C° and HDPE at 50C° show immediate
damage and are not recommended for continuous use.
Ethylene glycol LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Ethylene oxide HDPE at 20C° shows little or no damage after 30 days of constant exposure. LDPE at 20C° and LDPE/ HDPE
at 50C° show some effect after 7 days.
Ferric chloride LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Fluoride LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Fluorine HDPE at 20C° shows little or no damage after 30 days of constant exposure. LDPE at 20C° shows some effect
after 7 days. Neither HDPE or LDPE are recommended at 50C°.
Formaldehyde 10% LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Formaldehyde 40% LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Glycerol LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Heating oil No further data is available at this time.
Hexane HDPE at 20C° shows little or no damage after 30 days continuous use and at 50 C° shows some effect after 7
days. LDPE not recommended at any temperature.
Hydrochloric acid 5% LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Hydrochloric acid 20% LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Hydrochloric acid 35% LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Hydrocyanic acid LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Hydrofluoric acid LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Hydrofluoric acid 4% LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Hydrofluoric acid 48% LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Hydrogen peroxide 3% LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Hydrogen peroxide 30% LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Isobutyl alcohol LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Isopropyl acetate No data is available at this time.
Isopropyl alcohol LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Kerosene LDPE and HDPE at 20C° show some effect after 7 days. HDPE and LDPE not recommended at 50C°, as
immediate damage may occur.
Lactic Acid 10 % LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Lactic Acid 90 % LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Lead acetate LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
metallic salts, dissolved No data is available at this time.
Methanoic acid 100% No data is available at this time.
Methanol LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Methyl ethyl ketone Immediate damage may occur. Not recommended for continuous use.
Methyl propyl ketone HDPE at 20C° shows some effect after 7 days. LDPE at 20C°-50C° and HDPE at 50C° - Immediate damage
may occur. Not recommended for continuous use.
Methylene chloride HDPE at 20C° shows some effect after 7 days. LDPE at 20C°-50C° and HDPE at 50C° - Immediate damage
may occur. Not recommended for continuous use.
Mineral oil LDPE and HDPE at 20C° show little or no damage after 30 days of constant exposure. LDPE at 50C° may
show immediate damage and is not recommended.
n-amyl acetate LDPE and HDPE at 20C° show little or no damage after 30 days of constant exposure. LDPE at 50C° shows
some effect after 7 days or constant exposure.
n-butyl alcohol LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
n-octane LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Nitric acid 50 % LDPE at 20C° shows little or damage after 30 days. HDPE at 20C° and LDPE at 50C° show effect after 7 days.
HDPE at 50C° shows immediate damage and is not recommended.
Nitric acid 70 % HDPE and LDPE at 20C° show some effect after 7 days. Both at 50C° show immediate damage and are not
recommended.
Oleic acid HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure. LDPE at 20C°-50C° shows
immediate damage and is not recommended.
Oxalic acid LDPE at 20C° shows some effect after 7 days. HDPE at 20C° and both HDPE and LDPE at 50C° show little or
no damage after 30 days.
Ozone HDPE and LDPE at 20C° show little or no damage after 30 days of constant exposure. HDPE and LDPE at
50C° show immediate damage and are not recommended.
Perchloric acid HDPE and LDPE at 20C° show little or no damage after 30 days of constant exposure. HDPE and LDPE at 50C° show immediate damage and are not recommended.
Perchloric ethylene HDPE and LDPE at 20C°-50C° show immediate damage and are not recommended.
Phenol HDPE and LDPE at 20C°-50C° show immediate damage and are not recommended.
Phosphoric acid 10% LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Phosphoric acid 85% HDPE and LDPE at 20C° show little or no damage after 30 days of constant exposure. LDPE at 50C° shows
immediate damage and is not recommended.
Phosphorous trichloride HDPE and LDPE at 20C° show little or no damage after 30 days of constant exposure. LDPE at 50C° has no
data available. HDPE at 50C° shows some effect after 7 days.
Potassium acetate No data is available at this time.
Potassium bromide No data is available at this time.
Potassium carbonate LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Potassium hydroxide 5 % LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Potassium hydroxide
concentrated LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Potassium permanganate LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Propylene glycol LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Pyridine Immediate damage may occur. Not recommended for continuous use.
Salicylic acid, saturated LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Silver acetate LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Silver nitrate LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Sodium carbonate LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Sodium chloride,
saturated LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Sodium dichromate LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Sodium hydroxide 1% LDPE at 20C°-50C° shows little or no damage after 30 days of constant exposure. HDPE at 20C°-50C° shows
some effect after 7 days.
Sodium hydroxide 50% LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Sodium hypochlorite 15% HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure. LDPE at 20C° is suitable but
at 50C° shows some effect after 7 days.
Sodium nitrate LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Sodium sulphate LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Sucrose LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Sulphide No additional information is available at this time.
Sulfuric acid 6% LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Sulfuric acid 20% LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Sulfuric acid 60% LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Sulfuric acid 98% LDPE at 20C°-50C° shows little or no damage after 30 days of constant exposure. HDPE at 20C° shoes effect
after 7 days and is not recommended for use at 50C°.
Tannic acid LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Tetrahydrofuran HDPE and LDPE at 20C° show some effect after 7 day of constant exposure.HDPE and LDPE at 50C° show
immediate damage and are not recommended.
Toluene LDPE at 20C° show some effect after 7 day of constant exposure. HDPE at 20C°-50C° and LDPE at 50C°
show immediate damage and are not recommended.
Trichloracetic acid HDPE and LDPE at 20C° show some effect after 7 day of constant exposure.HDPE and LDPE at 50C° show
immediate damage and are not recommended.
Trichlorethane Immediate damage may occur. Not recommended for continuous use.
Turpentine oil HDPE and LDPE at 20C° show some effect after 7 day of constant exposure. HDPE and LDPE at 50C° show
immediate damage and are not recommended.
Urea LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Xylene HDPE at 20C° shows some effect after 7 day of constant exposure. LDPE at 20-50C° and HDPE at 50C° show
immediate damage and are not recommended.
Zinc chloride LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.

Basic Info Model NO. LPG Gas Tanker Semi Trailer Storage Propane, Liquid Ammonia Trademark Dong Run Ze Transport Package Nil Specification OEM Origin China HS Code 8716311000 Product Description Customer Question & Answer Ask something for more details (0) 3 Axles Heavy Duty LPG Gas Tanker Semi Trailer 59CBM (Liquefied Petroleum GasPropane , Isobutane, Dimethyl Ether)
Liquid gasTank semi trailer
Three Axles,13units 12R22.5 tires
Tank volume 59000Liters
Rated loading 24800-30000kg

Net Weight 15200kg

Photos:

ItemDTA9401GYQ		Unit	Parameter
Product name			3 axle semi-trailer
Practical capacity		M3	59.05
Gross weight		kg	40000
Curb weight			15200
rated loading capacity			24800-30000kg
Overall dimension		mm	12965 * 2500 * 3990
Axle			3
Wheelbase			7970 +1310 +1310
Tread	Front tread		-
	Rear tread		1840/1840/1840
Front/rear suspension		mm	-/1450
Leaf spring			-/8/8/8 , -/10/10/10
Fifth wheel max loading		kg	16000
Tyre specification		12	12R22.5/11.00R20
Exclusive configuration	Tank material	Q345R
	Standard configuration	13T axle, safety valve,single fluid two valve box.hydraulic legs,traction pin,liquid Indicator,pssure gauge,temperature gauge,emergency cut-off valve,valve box,fire suppssion bottle,spark hider cover,anti static grounding tape,protective guard,tyre protective shield.
	Other	Filling Medium:propane;design pssure 1.77Mpa,design temperature 50°C,filling ratio:0.42t/m3,corrosion allowance:1mm;dimension of tank:12850×2496mm .
	Standard configuration	GB150-1998<Steel pssure vessels>,Supervision regulation on safety technology for pssure vessel,Supervision regulation on safety technology for Liquefy gas tank truck.
Shanghai price

Tank Body	MaximumWorkPressureMpa		1.61
	Design PressureMpa		1.61
	Design Temperature ºC		-40 to 50
	Loading weight per unit capacity kg/L		0.42
	Capacity m3		59.05
	Loading medium		LPG
	Medium characteristics		Moderate Harm
	Body material	shell mm	Q345R
		headmm	Q345R
	Corrosion allowance	shell mm	2
		headmm	2
	Negative deviation ofthickness	shell mm	0
		headmm	0.3
	Welded joint coefficient		1
	hydraulic test pssure Mpa		2.1
	Design service life		15 years
	Heating method		Integrally annealing
Safety Valve	Type		Built-in spring full-open type
	Specification		PN4.0 DN50
	Set pssure Mpa		2.13
Liquid Level Meter	Type		Floating ball rotation
	Range m		0~2.38
	Nominal psure Mpa
Pressure Gauge	Dial diameter mm		≥100
TIRES	12R22.5 12PR		12pcs

Liquefied Petroleum Gas.

Filling Medium	Liquefied Petroleum Gas (propane)
Medium Density	420-590 kg/ cbm
Design Temperature(ºC)	Under 50ºC
Water PressureTest(MPa)	2.1Mpa / 21 Bar
Design Pressure(MPa)	1.61 Mpa / 16.1 Bar
Corrosion Allowance(mm)	1mm
Material of Main Parts	Tanker body: Q345,12mm,
	Tanker End plate:Q345R,12mm
	Main beam:16Mn
Heat Treatment	Overall treatment in a furnace,600ºC to 640 ºC
Flaw Detection	100% Flaw detectionwith X-ray
Manhole (Size asCustomer's Requirement)
Quantity	1xDN450mm on top
Safety Valve(As Customer's Requirement)
Quantity	1 piece
Location	On the top of tanker
Size	DN100
Level Gauge
Type	Hand Rotation Level Gauge
Location	At the rear ofthe end plate
Wheeling System
Axles	3*13Ton FUWABrand
Leaf Spring	10-piece, 6 sets
Suspension	Heavy DutyMechanical Suspension
Tire	12R22.5 Tubeless tire,13including one spare tire
Landing leg	JOSTBrand
King Pin	JOST Brand 2"
Pneumatic Braking System	WABCO RE 4relay valve; T30/30+T30 Spring brake chamber; 40L air tanks.
Safety Control System
Emergency Cut-off Valves	2 pcs, DN25×1 for gas phase,DN50×1 for liquid phase
Ball Valve	4pcs,DN25×2 for gas phase,DN50×2 for liquid phase
Liquid Gauge	1piece
Thermometer	2 piece
Pressure Gage	2 piece
Accessories
Small Tool Box	1piece
Wheel Carrier	2pcs
Fire Extinguisher	4 pcs
Mud Guard	6 pcs
Tanker Paint	Color or Logo painted as requirement

Model	9400GYQ		Liquid AmmoniaTank semi trailer
	Items		Data
Transport Semi-Trailer	Curb Weight		~15510kg/ air suspension ~16080 kg/spring suspension
	Rated Loading Weight		23900kg;24750kg;25000kg
	Maximum Gross Weight		~40000kg
	Front Fitting Radius mm		1710mm
	Interstice Radius mm		2300mm
	Wheel base mm		5290+1310+1310; 6020+1310+1310; 6200+1310+1310; 6940+1310+1310
	Minimum Ground Clearance mm		320mm-540mm
	Water Pressure Mpa		2.49Mpa
	Airtight Test Pressure Mpa		1.91Mpa
	Stroke Of Support Unit mm		483mm
	King Pin Diameter Mm		φ50; φ90;
	Dimension(L×W×H) mm		11845x2500x3850; 11505×2500×3940; 12606×2500×3750; 12000×2500×3900mm
Tank Body	Maximum Work Pressure Mpa		1.91
	Design Pressure Mpa		1.91
	Design Temperature ºC		-19ºC to 50ºC
	Loading weight per unit capacity kg/L		0.52-0.53 ( 530kg/m3)
	Tank Capacity m3		46M3; 46.7M3;
	Loading Medium		Liquid Ammonia
	Medium Characteristics		Moderate Harm
	Body Material	Shell mm	Q345R13.95~14mm
		Head mm	Q345R13.92~14mm
	Corrosion Allowance	Shell mm	2
		Head mm	2
	Negative Deviation OfThickness	Shell mm	0
		Head mm	0.3
	Welded Joint Coefficient		1
	Hydraulic Test Pressure Mpa		2.49
	Design Service Life		15 Years
	Heating Method		Integrally Annealing
Safety Valve	Type		Built-In Spring Full-Open Type
	Specification		DN80
	Set Pressure Mpa		2.13
Liquid Level Meter	Type		Floating Ball Rotation
	Range m		0~2.38
	Nominal Presure Mpa
Pressure Gauge	Dial Diameter mm		≥100
	Accuracy		Level 1.6
	Range Mpa		0~4.0
1. Manhole Quantity One Dimensions 450mm IdDN450 Specification Q345R ; Bolted Type (24x M24) Gasket PTFE 2. Safety Relief Valve Assembly Quantity One DN80 Gasket PTFE Location Top Of The Tank. 3. Gas Line Dimensions DN25 Gasket PTFE 4. Liquid Line Dimensions DN50 (2") Gasket PTFE

Pressure Vessel Liquid Ammonia Storage Tank 10CBM-100CBM Anhydrous Liquid Ammonia (Liquid NH3)

	Tank	Volume (m³)	loading mass (ton)	standard and configuration
1	Liquid ammonia tank	10	5.2	Execution standard: GB150 "pssure vessel" and "fixed pssure vessel safety technology and supervision code" design pssure: 21.6 design temperature: 50 ° c filling ratio: 0.52 corrosion allowance: material: 2 mm subject Q345R
2		20	10.4
3	Liquid ammonia tank	25	13
4		32	16.64
5	Liquid ammonia tank	50	26
6		60	32.2
7	Liquid ammonia tank	80	41.6
8		100	46.8

Butane Tank Horizontal Storage 40m3 (Pressure Vessel ) for LPG Gas Propane, Liquid Sulfur Dioxide, Isobutane, Dimethyl Ether


Propane design pssure of 1.77 MPa design temperature 50 ºC corrosion allowance 1 mm density of 0.42 T/M3

Design of liquid ammonia pssure of 2.16 MPa design temperature 50 ºC corrosion allowance 2 mm density of 0.52 T/M3

Propane design pssure of 1.77 MPa design temperature 50 ºC corrosion allowance 1 mm density of 0.42 T/M3

Propane design pssure of 2.16 MPa design temperature 50 ºC corrosion allowance 1 mm density of 0.43 T/M3

Liquid sulfur dioxide design pssure of 0.98 MPa design temperature 50 ºC corrosion allowance 4 mm density of 1.2 T/M3

Gas pssure is 4.1 MPa design temperature 50 ºC corrosion allowance of 1.4 mm

Propane design pssure of 1.77 MPa design temperature 50 ºC corrosion allowance 1 mm density of 0.42 T/M3

Isobutane design pssure of 0.79 MPa design temperature 50 ºC corrosion allowance 1 mm density of 0.49 T/M3

Dimethyl ether design pssure of 1.15 MPa design temperature 50 ºC corrosion allowance 1 mm density of 0.58 T/M3

Product Model	T-LPG-TK
Structural form	Integral type, separated type
Install Method	Above-ground,
System ApproachOPTIONAL:	Double pump system, single pump system
Storage Tank Volume(M3;)	5, 6, 10,15,20, 30 , 40 , 50 , 60,80, 100 , 125, 150
Design pssure of storage tank	1.77Mpa
Design pssure of pipe	2.5Mpa
Opening pssure of safety valve	1.75Mpa
Ambient Temperature	-40-55°C
Ambint Humidity	10~95%
Dimension of skid-mounted body	Up to customer's requirement

Horizontal Storage HCL Acid Tanks Steel Lined LDPE 120000 Liters

For Storage Bleach, Hydrochloric Acid, Ferric Chloride, Oilfield Chemicals, Corrosive Wastes And Other Hazardous Cargoes.

Steel ( 6 mm -8mm ) Lined PE - Plastic 7042 (16mm - 20 mm )storage tank

storage hydrochloride, hydrogen chlorate, sodium hydroxide,acrylic

acetic acid, glacial acetic acid, hydrogen peroxide

Propionic acid, ammonia,NH3·H2O

other tanks

Horizontal Oil Tank	Horizontal Oil Tank
	SS Double Oil Tank
	SF Double Oil Tank
Industrial Condenser	U shape Condenser
	Tubular surface condenser
Reaction Tower	Pressure Reactor
	Pyrolysis Reactor

Horizontal Fuel Storage Tank Cbm For Petroleum Oil,Gasoline, Petrol, Diesel Steel Q235 or Q345 .Q245.R20 thinckness 5.6.8mm - 10.12mm Custermizing 1-100CBM



Acid Storage Tank for Oil Fied Chemical Contain Hydrochloric Acid 120CBM Horizontal

Used to contain: HCl (max 35%), NaOH (max 50%), NaCLO (max 10%), PAC (max 17%), H2SO4 etc


Horizontal / Vertical Storage HCL Acid Tanks Steel Lined LDPE 120000 Liters
For Storage Bleach, Hydrochloric Acid, Ferric Chloride, Oilfield Chemicals, Corrosive Wastes And Other Hazardous Cargoes.
Steel ( 6 mm -8mm ) Lined PE Plastic 7042 (16mm - 25 mm ) storage tank

water tank	stainless steel tank /water pump/ High pssure squirt gun
steel option	Q235/Q345/ 16 manganese steel/SS201/SS304 /SS316 alummin alloy tanker
acids tanker	steel lined plastic for water/alcohol/ethanol acid, alkaline and salt HCL, NaOH ,NaCIO Sodium Hypochlorite NaCIO /hydrofluoric acid HF/CAUSTIC SODA alummin nitric acid
oil/petrol,Fuel diesel/LPG/LNG	steel tank with oil pump/ gun fuel truck nozzle
asphalt/bitumen/crude oil tanker/ AN ammonium methana Alcohol	burner/steam heating and insulation system ,pump option

VerticaltypePEPlastictank

Capaicty	Shelllength	Totallength	Diameter	Weight	Shellthickness	EXWPrice
1m3	750mm	930mm	1300mm	95(KG)	15mm	$1355~$2060
2m3	1800mm	1980mm	1300mm	150(KG)	15mm	$1565~$2260
5m3	1100mm	1400mm	2400mm	260(KG)	15mm	$1880~$2560
10m3	2200mm	2500mm	2400mm	500(KG)	20mm	$2508~$3560
15m3	3300mm	3600mm	2400mm	680(KG)	20mm	$3850~$5560
20m3	4400mm	4700mm	2400mm	850(KG)	22mm	$5480~$7180
30m3	4400mm	5040mm	3000mm	1350(KG)	25mm	$6490~$8190
40m3	4900mm	5500mm	3450mm	2000(KG)	32mm	$6860~$8560
50m3	6000mm	6600mm	3450mm	2300(KG)	32mm	$11520~$13920

5 cbm/m3	Q235A5mm+ PE(Plastic )16mm	US$7,200.00
10 m3	Q235A5mm+PE16mm	US$9,200.00
20 m3	Q235A5mm+PE16mm	US$11,200.00
30	Q235A6mm+PE16mm	US$13,200.00
40	Q235A6mm+PE16mm	US$15,200.00
50	Q235A6mm+PE16mm	US$17,200.00
60	Q235A6mm+PE16mm	US$19,200.00
70	Q235A6mm+PE16mm	US$21,200.00
80	Q235A8mm+PE16mm	US$23,200.00
90	Q235A8mm+PE16mm	US$25,200.00
100	Q235A8mm+PE16mm	US$27,200.00
110	Q235A8mm+PE16mm	US$29,200.00
120	Q235A8mm+PE16mm	US$30,800.00
130	Q235A8mm+PE16mm	US$32,400.00
135	Q235A8mm+PE16mm	US$34,400.00

manufacturer, supplier and exporter ofAcid Storage Tank inChina. Storage Tanks are widely used for storing chemicals and acids and can be availed in various models such as horizontal and vertical. These tanks are equipped with best quality stainless steel material and mild steel, extensively used in various industries - such as pharmaceutical, sugar, food and dairy. This storage tank is widely in demand and accepted by our clients.

Being a quality centric organization, our product line includesPlastic Storage Tank, Chemical Storage Tank, Horizontal Storage tank, Bottom Conical Storage Tank and many more. The manufactured range of Acid Storage Tanks is available to the clients in different sizes using high quality design and welding standards. Storage tanks are mostly appropriate for over ground and underground installations and can be used to store acids in safe and secure way.

we cater to the bulk requirements of the clients and strive to offer the best quality products manufactured in compliance with international standards. We have been able to mark our strong foothold as one the leading Manufacturer of Acid Storage Tanks from China

LDPE & HDPE polyethylene resistance listed by chemical
1.4-dioxane LDPE and HDPE at 20C° show little or no damage after 30 days of constant exposure. LDPE at 50C° shows
some effect after 7 days of constant exposure.
Acetaldehyde LDPE and HDPE at 20C° show little or no damage after 30 days of constant exposure. HDPE at 50C° shows
some effect after 7 days of constant exposure. LDPE - immediate damage may occur.
Acetic Acid 5 % LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Acetic Acid, glacial 50% LDPE and HDPE at 20C° show little or no damage after 30 days of constant exposure. LDPE at 50 C° -
immediate damage may occur.
Acetone LDPE and HDPE at 20C°-50C° - damage may occur. Not recommended for continuous use.
Allyl Alcohol LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Aluminum salts LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Amino acids LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Ammonia LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Ammonium carbonate,
saturated LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Ammonium phosphate LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Ammonium sulphate LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Amyl chloride HDPE at 20C° shows some effect after 7 days of constant exposure. HDPE at 50C° and LDPE at 20C°-50C° -
immediate damage may occur. Not recommended for continuous use.
Aniline LDPE and HDPE at 20C° show little or no damage after 30 days of constant exposure. HDPE at 50C° shows
some effect after 7 days of constant exposure.
Benzene LDPE and HDPE at 20C°-50C° - damage may occur. Not recommended for continuous use.
Benzyl alcohol LDPE and HDPE at 50C° - immediate damage may occur. HDPE at 20C° shows some effect after 7 days of
constant exposure.
Boric acid LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Bromine LDPE and HDPE at 50C° - immediate damage may occur. HDPE at 20C° shows some effect after 7 days of
constant exposure.
Butyric acid LDPE and HDPE at 50C° - immediate damage may occur. HDPE at 20C° shows some effect after 7 days of
constant exposure.
Calcium chloride LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Calcium hydroxide
saturated LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Calcium sulphate No data is available at this time.
Carbon tetrachloride HDPE at 20C° shows little or no damage after 30 days. LDPE at 20C° and HDPE at 50C° show some effect
after 7 days of constant exposure. LDPE at 50C° not recommended.
Chlorobenzene Immediate damage may occur. Not recommended for continuous use.
Chloroform HDPE and LDPE at 20C° show some effect after 7 days. At -50C° - immediate damage may occur. Not
recommended for continuous use.
Chlorine 10% in water HDPE and LDPE at 20C° shows little or no damage after 30 days. LDPE at 50C° shows damage and is not
recommended.
Chromic acid 10% LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Chromic acid 50% LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Citric acid 10% LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Cresol HDPE at 20C° shows some effect after 7 days. LDPE at 20C°-50C° and HDPE at 50C° show immediate
damage and are not recommended for continuous use.
Cyclohexane LDPE and HDPE at 50C° - immediate damage may occur. HDPE and LDPE at 20C° show some effect after 7
days of constant exposure.
Diethyl ketone LDPE and HDPE at 20C°-50C° - damage may occur. Not recommended for continuous use.
Dimethylsulfoxide LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Ethanol 95% LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure. Ethyl acetate LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Ethyl benzene HDPE at 20C° shows some effect after 7 days. LDPE at 20C°-50C° and HDPE at 50C° show immediate
damage and are not recommended for continuous use.
Ethylene glycol LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Ethylene oxide HDPE at 20C° shows little or no damage after 30 days of constant exposure. LDPE at 20C° and LDPE/ HDPE
at 50C° show some effect after 7 days.
Ferric chloride LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Fluoride LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Fluorine HDPE at 20C° shows little or no damage after 30 days of constant exposure. LDPE at 20C° shows some effect
after 7 days. Neither HDPE or LDPE are recommended at 50C°.
Formaldehyde 10% LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Formaldehyde 40% LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Glycerol LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Heating oil No further data is available at this time.
Hexane HDPE at 20C° shows little or no damage after 30 days continuous use and at 50 C° shows some effect after 7
days. LDPE not recommended at any temperature.
Hydrochloric acid 5% LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Hydrochloric acid 20% LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Hydrochloric acid 35% LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Hydrocyanic acid LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Hydrofluoric acid LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Hydrofluoric acid 4% LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Hydrofluoric acid 48% LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Hydrogen peroxide 3% LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Hydrogen peroxide 30% LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Isobutyl alcohol LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Isopropyl acetate No data is available at this time.
Isopropyl alcohol LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Kerosene LDPE and HDPE at 20C° show some effect after 7 days. HDPE and LDPE not recommended at 50C°, as
immediate damage may occur.
Lactic Acid 10 % LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Lactic Acid 90 % LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Lead acetate LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
metallic salts, dissolved No data is available at this time.
Methanoic acid 100% No data is available at this time.
Methanol LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Methyl ethyl ketone Immediate damage may occur. Not recommended for continuous use.
Methyl propyl ketone HDPE at 20C° shows some effect after 7 days. LDPE at 20C°-50C° and HDPE at 50C° - Immediate damage
may occur. Not recommended for continuous use.
Methylene chloride HDPE at 20C° shows some effect after 7 days. LDPE at 20C°-50C° and HDPE at 50C° - Immediate damage
may occur. Not recommended for continuous use.
Mineral oil LDPE and HDPE at 20C° show little or no damage after 30 days of constant exposure. LDPE at 50C° may
show immediate damage and is not recommended.
n-amyl acetate LDPE and HDPE at 20C° show little or no damage after 30 days of constant exposure. LDPE at 50C° shows
some effect after 7 days or constant exposure.
n-butyl alcohol LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
n-octane LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Nitric acid 50 % LDPE at 20C° shows little or damage after 30 days. HDPE at 20C° and LDPE at 50C° show effect after 7 days.
HDPE at 50C° shows immediate damage and is not recommended.
Nitric acid 70 % HDPE and LDPE at 20C° show some effect after 7 days. Both at 50C° show immediate damage and are not
recommended.
Oleic acid HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure. LDPE at 20C°-50C° shows
immediate damage and is not recommended.
Oxalic acid LDPE at 20C° shows some effect after 7 days. HDPE at 20C° and both HDPE and LDPE at 50C° show little or
no damage after 30 days.
Ozone HDPE and LDPE at 20C° show little or no damage after 30 days of constant exposure. HDPE and LDPE at
50C° show immediate damage and are not recommended.
Perchloric acid HDPE and LDPE at 20C° show little or no damage after 30 days of constant exposure. HDPE and LDPE at 50C° show immediate damage and are not recommended.
Perchloric ethylene HDPE and LDPE at 20C°-50C° show immediate damage and are not recommended.
Phenol HDPE and LDPE at 20C°-50C° show immediate damage and are not recommended.
Phosphoric acid 10% LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Phosphoric acid 85% HDPE and LDPE at 20C° show little or no damage after 30 days of constant exposure. LDPE at 50C° shows
immediate damage and is not recommended.
Phosphorous trichloride HDPE and LDPE at 20C° show little or no damage after 30 days of constant exposure. LDPE at 50C° has no
data available. HDPE at 50C° shows some effect after 7 days.
Potassium acetate No data is available at this time.
Potassium bromide No data is available at this time.
Potassium carbonate LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Potassium hydroxide 5 % LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Potassium hydroxide
concentrated LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Potassium permanganate LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Propylene glycol LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Pyridine Immediate damage may occur. Not recommended for continuous use.
Salicylic acid, saturated LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Silver acetate LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Silver nitrate LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Sodium carbonate LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Sodium chloride,
saturated LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Sodium dichromate LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Sodium hydroxide 1% LDPE at 20C°-50C° shows little or no damage after 30 days of constant exposure. HDPE at 20C°-50C° shows
some effect after 7 days.
Sodium hydroxide 50% LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Sodium hypochlorite 15% HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure. LDPE at 20C° is suitable but
at 50C° shows some effect after 7 days.
Sodium nitrate LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Sodium sulphate LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Sucrose LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Sulphide No additional information is available at this time.
Sulfuric acid 6% LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Sulfuric acid 20% LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Sulfuric acid 60% LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Sulfuric acid 98% LDPE at 20C°-50C° shows little or no damage after 30 days of constant exposure. HDPE at 20C° shoes effect
after 7 days and is not recommended for use at 50C°.
Tannic acid LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Tetrahydrofuran HDPE and LDPE at 20C° show some effect after 7 day of constant exposure.HDPE and LDPE at 50C° show
immediate damage and are not recommended.
Toluene LDPE at 20C° show some effect after 7 day of constant exposure. HDPE at 20C°-50C° and LDPE at 50C°
show immediate damage and are not recommended.
Trichloracetic acid HDPE and LDPE at 20C° show some effect after 7 day of constant exposure.HDPE and LDPE at 50C° show
immediate damage and are not recommended.
Trichlorethane Immediate damage may occur. Not recommended for continuous use.
Turpentine oil HDPE and LDPE at 20C° show some effect after 7 day of constant exposure. HDPE and LDPE at 50C° show
immediate damage and are not recommended.
Urea LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Xylene HDPE at 20C° shows some effect after 7 day of constant exposure. LDPE at 20-50C° and HDPE at 50C° show
immediate damage and are not recommended.
Zinc chloride LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.

Hubei Dong Runze Special Vehicle Equipment Co., Ltd.

FAST DEPENDABLE SPECIAL TRUCKS & TRAILERS & SPARE PARTS SUPPLIER FROM China

Business range including trucks, trailers, mobile generators, machinery and auto parts, vehicle-mounted tank, automotive parts sales; Import and export business. We produce varieties of special vehicles, such as water tank truck, fuel/oil tank truck, chemical liquid tank truck, dump truck, truck mounted crane, concrete mixer truck, aerial platform truck, bulk powder tanker truck, asphalt/bitumen truck, sewage vacuum truck, septic(fecal) suction truck, garbage truck, road wrecker, fire fighting truck, refrigerator wagon, tractor, trailers, semi-trailers for oil, asphalt, bulk powder, container, LNG transportation, Low bed, tipper, skeleton semi trailer, etc., which are widely used in environment and sanitation, virescence, architecture, transportation, oil mining and many other fields.

With more than 10 years′ producing experience, we have shipped our vehicles to many countries worldwide ---- Angola, Algeria, Nigeria, Congo, Libya, Gambia, Ghana, Ethiopia, Mozambique, Tanzania, Sudan, Mali, Niger, Namibia, Jordan, Iraq, Qatar, Uzbekistan, Kazakhstan, Kyrgyzstan, Armenia, Bangladesh, Sri Lanka, North Korea, Philippines, Myanmar, Vietnam, Chile, Venezuela, Trinidad, etc.

Specialize in SHACMAN, FOTON, FAW, Dongfeng, North Benz -Beiben, ISUZU, DF Nissan-UD, HINO, JMC, JAC, SAIC Iveco, Hualing-CAMC trucks & semi-trailer customizaton business.

Business Scope: Trucks, Trailers, Mobile Generators, Environmental Protection Machinery, Auto Parts, Vehicle-Mounted Tank, Automotive Parts; Stroller, Tools, Hardware, Machinery, Electronic Products, Household Appliances, Building Materials, Arts And Crafts, Translation, Management Consulting, International Freight Forwarding, All Kinds Of Goods And Technology Import And Export Business

Customizing Whollesale manufacturers of famous brand truck, welcome to wholesale tankers, semi trailer, truck parts of good capacity at competitive price from our factory.

With more than 10 years′ producing experience, we have shipped our vehicles to many countries worldwide ----Nigeria, Congo, Ghana, Zambia, Tanzania, Sudan, Uzbekistan, Sri Lanka, Korea, Myanmar, Vietnam, Chile, Argentina, Peru etc.

Enterprise Culture

Enterprise Purpose: Establish typical example of fire civilization by science.

Enterprise Target: Create rich rewards for customers, for shareholders, and for company.

Enterprise Spirit: Unity, Preciseness, Self-improvement, Endeavour.

Enterprise Values: For society, for our country, for company, for staff.

Enterprise Concept: Quality is our dignity.

Professional Power

China′s largest supplier of the "one-stop"Special Vehicle Equipment, Commercial Vehicle Body Building Trucks & Trailers & Spare Parts Solution China′s Largest Customizer, Supplier.