Plaster Powder/Cement /Flyash Bulk Cemnt ISO Tank Container 20FT with Air Pump

CustermizingPortable iso Tank Container Tank Container

Tank container main Technical Parameters
	20FT tankContainer		30FT tank container	40FT tank container
Overall dimension(mm)	6058×2438×2438/2591		9144×2438×2438/2591	12192×2438×2438/2591
Working temperature(ºC)	-12C-50C

20FT 22.5cbm ISO Bulk Coal/Cement Powder Tank Container

Dimension of the 20FT 26CBM Bulk Cement Powder Tank Container without Diesel Engine&Air Compssor
Items	Unit	Parameter
External dimension(LxWxH)	mm	20' X8' X9' 6"
Internal size of tank	mm	6000 x2400
Tank volume	m³	26
Load capacity	m³	21.5
Design pssure	Mpa	0.2
Test pssure	Mpa	0.3
Design temperature	ºC	0 to +70
Max. gross weight	kg	30480
Tare weight	kg	4,080 (estmated)
Loading weight	kg	26400
Stacking weight.(For 1.8g)	kg	192000
Discharge rating	t/min	cement: 1.0 ~1.3
Remnant ratio	kg	cement: about 100kg
Materials
3.1 Main materials usde for the container shall be of the best quality conforming to the requirements of this specification society.
3.2 Materials of the main parts
Tank ahell Dish ends	Q345B -GB/T 15912008 Yield Point: 35kg/mm2 Tensile Strength: 50kg/mm2
Walk way Internals	Structural steel: SS41 Yield Point: 25kg/mm2 Tensile Strength: 41kg/mm2
Corner posts End rails Tank- to-end linkers End corner supports Tilted panels and ribs	Q345B ISO/R1161 Yield Point: 35kg/mm2 Tensile Strength:50kg/mm2
Corner fitting	Casted Weldable Steel: SCW49 Yield Point: 28kg/mm2 Tebsile Strength: 49kg/mm2
Pipe(Seamless Pipe)	20-GB8163 Yield Point:25kg/mm2 Tensile Strength: 41kg/mm2

Product Description

The functions of this series container tanker/Tank Container:
******This series tank Semi Trailers are suitable for the transportation of Bulk Cement/Flour/Coal/Plaster/Plastic granule/Lithium Hexafluorophosphate etc. Powder Material.
*** The volume varies widely from 22.5 cube meters to 52 cube meters, we can manufacture it according to your needs.

Design proposal for the 20feet ISO tank container:
---Net capacity: not less than 25cubic; Shell of tank container Materials using Wisco Q235 High quality carbon steel 6mm baffle;
---Two feed inlets,bigger manhole covers, 2NOS. pssure vent valves( breather valve) ,at the end of the bottom ,DN80 dump valve(discharge valve). Screw of Openings and valves adopt stainless steel screws, single coaming board on the top of tank Molybdenum red reflective tape;
---framework is made of High quality steel, each one ladder at back and forth. With two acid resistant tube, two 4kg fire extinguishers.

20feet 29.5 Tanker Container Plaster Powder Tank Container for Sale

Dimension of the 20FT 29.5CBM Plaster Powder Tank Container
Description and Specification of Commodity
Loading Capacity	29500L
Overall Size/mm	6058*2438*2591
Tare	4500 KG
Air Source pssure	0.8~1.0Bar
Minimum Loading Weight	27800kgs
Shell Material	Shell Mild Steel Q345B,5.0mm shell,5.0 mm dish ends
Desity of the Plaster Powder	1.0-1.1tons/CBM
Standard fitting
Manhole	520mm diameter 6point fixing,2pcs.1 pc of 2inches' vent on the top of the tank
Compartment	Single Compartment
Strengthen Ribbers	Both sides and ends.
Tail Structure	Equipped with 6" butterfly valve and quick connector,and also equipped with inlet help-flowing fluidizer;Equipped with air inlet tube and air inlet quick connector;Equipped with pssure gauge and safety valve.
Ladder	Located on the left side of the tail with ladder.
Walkway on the top	400mm walkway,one vertical one,three Horizontal ones;
Remark:	The frame of this Tank container is very strong.

The functions of this series container tanker/Tank Container:
******This series tank semi trailers are suitable for the transportation of Bulk Cement/Flour/Coal/Plaster/Plastic granule/Lithium Hexafluorophosphate etc. Powder Material.
*** The volume varies widely from 22.5 cube meters to 52 cube meters, we can manufacture it according to your needs.

Design proposal for the 20feet ISO tank container:
---Net capacity: not less than 25cubic; Shell of tank container Materials using Wisco Q235 High quality carbon steel 6mm baffle;
---Two feed inlets,bigger manhole covers, 2NOS. pssure vent valves( breather valve) ,at the end of the bottom ,DN80 dump valve(discharge valve). Screw of Openings and valves adopt stainless steel screws, single coaming board on the top of tank Molybdenum red reflective tape;
---framework is made of High quality steel, each one ladder at back and forth. With two acid resistant tube, two 4kg fire extinguishers.

ISOTANK List

The Main Technical Parameters of Tanks ( Standard)
Item	Loading Medium	Model	Capacity (m3)	Design Pressure (Mpa)	Design Temperature (c)	Tank Material	Nominal Tank Thickness (mm)	Insulation	Tare weight (Kg)	Max. Gross Weight (Kg)	Dimension (LX WX H)(mm)	Loading Method
1	R134a	T50	24	1.38	-40 /+55	SA-612N	11	Sunshade	6400	34000	6058 X2438 X2591	Down load unload
2	R22		22	2.1	-40/+50		18		8800
3	R143a		22	2.42			20		9500
4	R125		22	2.75			21		9500
5	R32		20	3.44			25		10900
6	AHF	T19	21	1.0	-40/+55	SA516M NGr.485	12	No	6900			Up load unload
7	Trichlorosilan	T14	21	0.5	-40/+50	Q345R (16MnR)	12	No	6780	34000	6058 X2438 X2591
8	Liquid Chlorine	T50	20	1.7	-40/+50		16		8300
9			21.72	1.62			16		8900
10	Liquid Ammonia	T50	21.6	2.2	-40/+50	06Cr19Ni10	22	Packing Insulation	11970
11	SO2	T20	21	1.03	40 /+60	16MnDR	12	No	6900
12	Cryogenic Liquid	T75	19.8,20	0.75-2.35	-196/+50	Inner Tank: 06Cr19Ni10 Outside Tank:Q345R		Vacuum With Mutli-wrapped	8600/12880			Down load unload
The Main Technical Parameters of Tanks (China Standard)
Item	Loading Medium	Model	Capacity (m3)	Design Pressure (Mpa)	Design Temperature (c)	Tank Material	Nominal Tank Thickness (mm)	Insulation	Tare weight (Kg)	Max. Gross Weight (Kg)	Dimension (LX WX H)(mm)	Loading Method
1	R134a	T50	24	1.38	-40 /55	Q345 (16MnR)	12	Sunshade	6500	34000	6058 X2438 X2591	Down load unload
2	R22		20	2.1	-40/+50		16		7850
3			24				18		9100
4	R125		22	2.75			22		9900
5	R32		22	3.44			28		12000
6			23.7		-40 /55				12700

20ft T50 LPG ISO Tank Container LPG Propane Isobutane Gas Tank Container 24K
Mob :008615271357675

1. DRZ Cryogenic Storage Tank include the following ISO cryogenic tank:10ft, 12ft, 20ft, 40ft
2. Used for: liquid oxygen tank container, liquid nitrogen tank container, liquid argon tank container, liquid Nitrous Oxide tank container, liquid carbon dioxide tank container, LNG tank container, LPG tank container, AHF tank container, Liquid Chlorine tank container, liquid ammonia tank container.
3. Tank capacity: 7.7m3~60m3.
4. Tank pssure: 8bar, 16bar ,24Bar or based on user requirement.
5.certificate: RID/ADR, CFR49, IMDG, T75 UN PORTABLE, TIR ,UIC, CSC, TC, US DOT, UK-DFT, FRA

Hydrogen Peroxide Iso Containers, Stainless Steel Iso Tank Containers

Sulphuric Acid Iso Containers, Stainless Steel Iso Tank Containers

Nitric Acid Iso Containers, Stainless Steel Iso Tank Containers

Mining Chemicals Iso Containers, Stainless Steel Iso Tank Containers

Food Products Iso Containers, Stainless Steel Iso Tank Containers

Solvents Iso Containers, Stainless Steel Iso Tank Containers

Oils Iso Containers, Stainless Steel Iso Tank Containers

Resins Iso Containers, Stainless Steel Iso Tank Containers

Alcoholic Beverages Iso Containers, Stainless Steel Iso Tank Containers

Mo 1Iso Containers, Stainless Steel Iso Tank Containers

Imo Iso Containers, Stainless Steel Iso Tank Containers

Imo 5Iso Containers, Stainless Steel Iso Tank Containers

Imo 7Iso Containers, Stainless Steel Iso Tank Containers

Food Tank Containers And Iso Containers, Stainless Steel Iso Tank Containers

Tank Containers Containers And Iso Containers, Stainless Steel Iso Tank Containers

Iso Containers, Stainless Steel Iso Tank Containers Hazardous.

Iso Containers, Stainless Steel Iso Tank Containers Non-Hazardous Liquid Materials.

Horizontal Iso Tanks And Containers, Stainless Steel Iso Tank Containers

Vertical Iso Containers, Stainless Steel Iso Tank Containers

The Aim Of Iso Is To Create aStandardised Process Of Manufacture So That Things Can Be Interchangeable No Matter Where You Are. Having Products With An Iso Label Enables People To Know Exactly How The Product Will Work And Know Everything about It.

There Are Plenty Of Advantages For Using An Iso Tank. They Are aHighly Reliable, Cost Effective And Safe Way Of Transporting Bulk Liquids From Place To Place.

T9, T10,T11,T14,T50 portable tank Standard ISO tank 10.9K-26K cement tank,
PTFE/PE Lined tanksforhydrofluoric acid liquid ,hydrochloric acid ,sodium hypochlorite HCl,NaOH,NaClO liquid etc.
Insulation Tank for bitumen Liquid Asphalt,crude oil etc.Portable Tank Container
Tank Containers can be used to carry the following products:
Portable Tank Container
Products
ISO Tank-Ammonium Nitrate
ISO Tank-Bio-diesel
ISO Tank-Molasses
ISO Tank-Caster Oil
ISO Tank-Hexane
ISO Tank-Ethanol
ISO Tank-Ethylene
ISO Tank-Methanol

ISO Tank-IMO 1
ISO Tank-IMO 2
ISO Tank-IMO5
ISO Tank-Capacities ranging from 10,000 litres to 25,000 litres
ISO Tank-Swap Bodies with capacities ranging from 26,000 litres to 32,000 litres
ISO Tank-Bitumen tank containers 21,000 litres
ISO Tank-Off-shore tanks with capacities of 1,000 litres to 10,000 litres
IMO 1
ISO Tank-Shell made from 316 Stainless Steel
ISO Tank-Capacity of 12,000 -26,500 litres nominal
ISO Tank-MAWP of 4bar
ISO Tank-For transport of:
ISO Tank-Hazardous liquids
ISO Tank-Available in 7.65, 10, 20, or 30 foot sizes
ISO Tank-Also Swap-bodies 7.65m and 7.82 (30,000-35,000 litres)
ISO Tank-Heating by steam or electric heating (optional)
ISO Tank-
Cooling by Glycol (optional)
Please contact us if you require further information and/or aquotation.(Contact Details above)
IMO 2
ISO Tank-Shell made from 316 Stainless Steel
ISO Tank-Capacity of 12,000 -26,500 litres nominal
ISO Tank-MAWP of 1.75 bar
ISO Tank-For transport of:
ISO Tank-Low Hazardous liquids
ISO Tank-Available in 7.65, 10, 20, or 30 foot sizes
ISO Tank-Also Swap-bodies 7.65m and 7.82 (30,000-35,000 litres)
ISO Tank-Heating by steam or electric heating
ISO Tank-Cooling by Glycol
Please contact us if you require further information and/or aquotation.(Contact Details above)
IMO 0
ISO Tank-Shell made from 316 Stainless Steel
ISO Tank-Capacity of 12000 -26500 litres nominal
ISO Tank-MAWP of 4bar
ISO Tank-For transport of
ISO Tank-Wine
ISO Tank-Fruit Juices
ISO Tank-Vegetable Oils
ISO Tank-Mineral Oils
ISO Tank-Non-hazardous Oils
ISO Tank-Available in 20 foot /6 metres
ISO Tank-Also Swap-bodies 7.65m and 7.82 (30,000-35,000 litres)
ISO Tank-Heating by steam or electric heating (optional)
ISO Tank-
Cooling by Glycol (optional)
Please contact us if you require further information and/or aquotation.(Contact Details above)
IMO 5
ISO Tank-Shell made from 316 Stainless Steel
ISO Tank-Capacity of 15,000 -25,500 litres nominal
ISO Tank-MAWP of 1.75 bar
ISO Tank-For transport of gases, including:
ISO Tank-Propane
ISO Tank-Butane
ISO Tank-Refrigerants
ISO Tank-Available in 20, 30 or 40 foot sizes
ISO Tank-Cooling by sun-shieldPlease contact us if you require further information and/or aquotation.(Contact Details above)IMO 7
ISO Tank-Shell made from 316 Stainless Steel or Carbon Steel
ISO Tank-Capacity of 20,000 -24,000 litres nominal
ISO Tank-MAWP of 8bar
ISO Tank-For transport of cryogenic gases, including:
ISO Tank-LNG
ISO Tank-Available in 10, 20, 30 or 40 foot sizes
ISO Tank-Cooling by glycolPlease contact us if you require further information and/or aquotation.(Contact Details above)
Bitumen Tank Containers
ISO Tank-Shell made from Carbon Steel
ISO Tank-Capacity of 20,000-25,000 litres nominal
ISO Tank-MAWP of 1.75 bar
ISO Tank-Low Hazardous liquids
ISO Tank-Available in 20 or 30 foot sizes
ISO Tank-Also Swap-bodies 7.15m (30,000 litres) and 7.82 (35,000 litres)
ISO Tank-Heating by direct flame, hot oil or electric heatingPlease contact us if you require further information and/or aquotation.(Contact Details above)
Cement Containers
ISO Tank-Capacity of 17.5 -25 cubic metres
ISO Tank-Pressure dischargeOffshore
ISO Tank-Shell made from 316 Stainless Steel
ISO Tank-Capacity of 2,000 -10,000 litres
ISO Tank-MAWP of 5bar
ISO Tank-For transport of gases, including:
ISO Tank-Hazardous chemicals
ISO Tank-Acid
ISO Tank-Petroleum
ISO Tank-Available in 8x 8x 10 sizes
ISO Tank-Heated by steam or electric (optional)

The highly hazardous tank container is an IMO 1, T11, T14, T20 or T22 stainless steel container with acapacity range between 14.600 and 24.000 liters. The tank containers we offer are suitable to transport highly hazardous and often corrosive cargoes. The tanks comply to all international regulations including -U Stamp (T20 and T22). We have avariety of tank containers with either arubber, resign or plastic lining. Other types and modifications include tank containers with baffle plates, bolted manlids, valve actuators, coated valves, coated spill boxes, gauges and different top discharge connections. Other safety related fittings or connections improving the operational flexibility can also be attached.

Beside the options shown, awide range of other modifications and fittings is available. Please share your enquiry and we will specify the most suitable tank container for your Business. During this process we will take into account the product(s) to be loaded, the area of operation and any loading or discharge pferences. Our goal is to provide you with the most optimal tank taking both income and costs into consideration.

ISO Tank, ISO Tank Containers

Manufacturers &Exporters

ISO Containers, stainless steel ISO tank containers, IMO tank containers for All types of Water ,Hydrogen Peroxide ,Sulphuric Acid ,Nitric Acid ,Mining chemicals ,Food Products ,Solvents, Oils ,Resins ,Alcoholic Beverages ,MO 1,IMO 2IMO 2,IMO 5IMO 5,IMO 7IMO 7,Food Tank Containers and UN portable tanks that can be used to ship ahazardous and non-hazardous liquid materials. Our ISO tanks is versatile tanks and ISO standards tanks, many different kind of can be equipped with insulation ISO tanks, steam heating ISO tank, electric heating ISO tank or refrigeration for products that require temperature control, top and/or bottom discharge valve and pipeline systems ,protective linings if required and other modifications we will provide as per customer requirement. Products stored or transported by these containers vary from non-hazardous and hazardous chemicals ISO tanks. These specially ISO tanks units are specially designed for transportation of bulk liquid product to, from and between fixed and/or mobile consumption points and where house delivery.

The bulk liquids that can be transported in an ISO tank include :

Swap body tank ISO tank ,ISO Tank Containers- aswap body has abigger tank which is larger than the frame, usually 23 or 25 feet (7.01 or 7.62 meters) long

Food-grade tank -ISO tank ,ISO Tank Containers- astandard tank container which can only be loaded with foodgrade products

ISO tank ,ISO Tank Containers Reefer tank -a tank with the ability to cool the product to be transported

ISO tank ,ISO Tank ContainersGas tank -a tank that is suitable for the transport of gases

Silo tank ISO tank ,ISO Tank Containers- atank for the transport of grains and powders

T1 ISO tank container for wine and light liquids (ISO tank ,ISO Tank Containers)

T4 ISO tank container for non-hazardous edible and non-edible oils (ISO tank ,ISO Tank Containers)

T11 ISO tank container for non-hazardous chemicals -ISO tank ,ISO Tank Containers

T14 ISO tank container for hazardous chemicals and acids like HCl and zinc chloride -ISO tank ,ISO Tank Containers

T50 ISO tank container for LPG and ammonia gas -ISO tank ,ISO Tank Containers

SWAP tank container (for cargo above 26,000 to 32,000 metric tons or 25,600 to 31,500 long tons or 28,700 to 35,300 short tons ISO tank ,ISO Tank Containers

Rubber-lined ISO tank container for acid-based chemicals best for ISO tank ,ISO Tank Containers

PE Linedsteeltanksfor hydrofluoric acid liquid ,hydrochloric acid ,sodium hypochlorite HCl,NaOH,NaClO liquid etc.

Hazardous chemicals

Acid

Petroleum

ISO Tank

ISO 40' LNG Tank Container	Bitumen tank container	ISO 20' Tank Container
IMO 1 Shell made from 316 Stainless Steel Capacity of 12,000 -26,500 litres nominal MAWP of 4bar For transport of: Hazardous liquids Available in 7.65, 10, 20, or 30 foot sizes Swap-bodies 7.65m and 7.82 (30,000-35,000 litres) Heating by steam or electric heating (optional) IMO 0 Shell made from 316 Stainless Steel Capacity of 12000 -26500 litres nominal MAWP of 4bar For transport of Wine Fruit Juices Vegetable Oils Mineral Oils Non-hazardous Oils Available in 20 foot /6 metres Swap-bodies 7.65m and 7.82 (30,000-35,000 litres) Heating by steam or electric heating (optional)	IMO 2 Shell made from 316 Stainless Steel Capacity of 12,000 -26,500 litres nominal MAWP of 1.75 bar For transport of:Low Hazardous liquids Available in 7.65, 10, 20, or 30 foot sizes Swap-bodies 7.65m and 7.82 (30,000-35,000 L) Heating by steam or electric heating Bitumen Tank Containers Shell made from Carbon Steel Capacity of 20,000-25,000 litres nominal MAWP of 1.75 bar Low Hazardous liquids Available in 20 or 30 foot sizes Heating by direct flame, hot oil or electric heating Cement Containers Capacity of 17.5 -25 cubic metres Pressure discharge Road transport tank container T4,T6,T7,T8,T9, T10,T11,T14,T50 portable tank; PE Linedsteeltanksfor hydrofluoric acid liquid ,hydrochloric acid ,sodium hypochlorite HCl,NaOH,NaClO liquid etc.	IMO 5 Shell made from 316 Stainless Steel Capacity of 15,000 -25,500 litres nominal MAWP of 1.75 bar For transport of gases, including: Propane Butane Refrigerants Available in 20, 30 or 40 foot sizes IMO 7 Shell made from 316 Stainless Steel or Carbon Steel Capacity of 20,000 -24,000 litres nominal MAWP of 8bar For transport of cryogenic gases, including: LNG Available in 10, 20, 30 or 40 foot sizes Offshore Shell made from 316 Stainless Steel Capacity of 2,000 -10,000 litres MAWP of 5bar For transport of gases, including: Hazardous chemicals Acid Petroleum Available in 8x 8x 10 sizes

Highly Hazardous UN Portable ISO Tank Containers 14,600 -24,000 Liters

Highly Hazardous UN Portable ISO Tank Containers
IMO 1, T11 /T14 /T20 /T22 UN portable tank container (14,600 -24,000 liters

A
UN 1701 to UN 1800[edit]
UN NumberClassProper Shipping Name
UN 17016.1Xylyl bromide, liquid
UN 17026.11,1,2,2-Tetrachloroethane

UN 17046.1Tetraethyl dithiopyrophosphate
UN 1705?(UN No. no longer in use) Tetraethyl pyrophosphate and compssed gas mixture (UN No. no longer in use)[1]

UN 17076.1Thallium compounds, n.o.s.
UN 17086.1Toluidines, liquid
UN 17096.12,4-Toluylenediamine, solid (2,4-Toluenediamine)
UN 17106.1Trichloroethylene
UN 17116.1Xylidines, liquid
UN 17126.1Zinc arsenate or Zinc arsenite or Zinc arsenate and zinc arsenite mixtures
UN 17136.1Zinc cyanide
UN 17144.3Zinc phosphide
UN 17158Acetic anhydride
UN 17168Acetyl bromide
UN 17173Acetyl chloride
UN 17188Butyl acid phosphate
UN 17198Caustic alkali liquid, n.o.s.
UN 1720 to 1721(UN No.s no longer in use)
UN 17226.1Allyl chloroformate
UN 17233Allyl iodide
UN 17248Allyltrichlorosilane, stabilized
UN 17258Aluminum bromide, anhydrous
UN 17268Aluminum chloride, anhydrous
UN 17278Ammonium hydrogendifluoride, solid
UN 17288Amyltrichlorosilane
UN 17298Anisoyl chloride
UN 17308Antimony pentachloride, liquid
UN 17318Antimony pentachloride, solution
UN 17328Antimony pentafluoride
UN 17338Antimony trichloride

UN 17368Benzoyl chloride
UN 17376.1Benzyl bromide
UN 17386.1Benzyl chloride or Benzyl chloride unstabilized
UN 17398Benzyl chloroformate
UN 17408Hydrogen difluorides, n.o.s. solid
UN 17412.3Boron trichloride
UN 17428Boron trifluoride acetic acid complex
UN 17438Boron trifluoride propionic acid complex
UN 17448Bromine or Bromine solutions
UN 17455.1Bromine pentafluoride
UN 17465.1Bromine trifluoride
UN 17478Butyltrichlorosilane
UN 17485.1Calcium hypochlorite, dry or Calcium hypochlorite mixtures dry with more than 39 percent available chlorine (8.8 percent available oxygen)
UN 17492.3Chlorine trifluoride
UN 17506.1Chloroacetic acid, solution
UN 17516.1Chloroacetic acid, solid
UN 17526.1Chloroacetyl chloride
UN 17538Chlorophenyltrichlorosilane
UN 17548Chlorosulfonic acid (with or without sulfur trioxide)
UN 17558Chromic acid solution
UN 17568Chromic fluoride, solid
UN 17578Chromic fluoride, solution
UN 17588Chromium oxychloride
UN 17598Corrosive solids, n.o.s.
UN 17608Corrosive liquids, n.o.s.
UN 17618Cupriethylenediamine solution
UN 17628Cyclohexenyltrichlorosilane
UN 17638Cyclohexyltrichlorosilane
UN 17648Dichloroacetic acid
UN 17658Dichloroacetyl chloride
UN 17668Dichlorophenyltrichlorosilane
UN 17678Diethyldichlorosilane
UN 17688Difluorophosphoric acid, anhydrous
UN 17698Diphenyldichlorosilane
UN 17708Diphenylmethyl bromide
UN 17718Dodecyltrichlorosilane

UN 17738Ferric chloride, anhydrous
UN 17748Fire extinguisher charges, corrosive liquid
UN 17758Fluoroboric acid
UN 17768Fluorophosphoric acid anhydrous
UN 17778Fluorosulfonic acid
UN 17788Fluorosilicic acid
UN 17798Formic acid
UN 17808Fumaryl chloride
UN 17818Hexadecyltrichlorosilane
UN 17828Hexafluorophosphoric acid
UN 17838Hexamethylenediamine solution
UN 17848Hexyltrichlorosilane

UN 17868Hydrofluoric acid and Sulfuric acid mixtures
UN 17878Hydriodic acid
UN 17888Hydrobromic acid, with more than 49 percent hydrobromic acid or Hydrobromic acid, with not more than 49 percent hydrobromic acid
UN 17898Hydrochloric acid
UN 17908Hydrofluoric acid, with more than 60 percent strength or Hydrofluoric acid, with not more than 60 percent strength
UN 17918Hypochlorite solutions
UN 17928Iodine monochloride, solid
UN 17938Isopropyl acid phosphate
UN 17948Lead sulfate with more than 3percent free acid

UN 17968Nitrating acid mixtures, with more than 50 percent nitric acid or Nitrating acid mixtures, with not more than 50 percent nitric acid

UN 17998Nonyltrichlorosilane
UN 18008Octadecyltrichlorosilane

Basic Info Model NO. Bulk Tank Container Condition New Size **2438*2591mm Trademark DRAU Transport Package Road Specification 20FT, 30FT, 40FT Origin Cn HS Code 8609001200 Product Description Customer Question & Answer Ask something for more details (0) Plaster Powder/Cement /Flyash Bulk Cemnt ISO Tank Container 20FT with Air Pump

CustermizingPortable iso Tank Container tank container

Tank container main Technical Parameters
	20FT tankcontainer		30FT tank container	40FT tank container
Overall dimension(mm)	6058×2438×2438/2591		9144×2438×2438/2591	12192×2438×2438/2591
Working temperature(ºC)	-12C-50C

20FT 22.5cbm ISO Bulk Coal/Cement Powder Tank Container

Dimension of the 20FT 26CBM Bulk Cement Powder Tank Container without Diesel Engine&Air Compssor
Items	Unit	Parameter
External dimension(LxWxH)	mm	20' X8' X9' 6"
Internal size of tank	mm	6000 x2400
Tank volume	m³	26
Load capacity	m³	21.5
Design pssure	Mpa	0.2
Test pssure	Mpa	0.3
Design temperature	ºC	0 to +70
Max. gross weight	kg	30480
Tare weight	kg	4,080 (estmated)
Loading weight	kg	26400
Stacking weight.(For 1.8g)	kg	192000
Discharge rating	t/min	cement: 1.0 ~1.3
Remnant ratio	kg	cement: about 100kg
Materials
3.1 Main materials usde for the container shall be of the best quality conforming to the requirements of this specification society.
3.2 Materials of the main parts
Tank ahell Dish ends	Q345B -GB/T 15912008 Yield Point: 35kg/mm2 Tensile Strength: 50kg/mm2
Walk way Internals	Structural steel: SS41 Yield Point: 25kg/mm2 Tensile Strength: 41kg/mm2
Corner posts End rails Tank- to-end linkers End corner supports Tilted panels and ribs	Q345B ISO/R1161 Yield Point: 35kg/mm2 Tensile Strength:50kg/mm2
Corner fitting	Casted Weldable Steel: SCW49 Yield Point: 28kg/mm2 Tebsile Strength: 49kg/mm2
Pipe(Seamless Pipe)	20-GB8163 Yield Point:25kg/mm2 Tensile Strength: 41kg/mm2

Product Description

The functions of this series container tanker/Tank Container:
******This series tank semi trailers are suitable for the transportation of Bulk Cement/Flour/Coal/Plaster/Plastic granule/Lithium Hexafluorophosphate etc. Powder Material.
*** The volume varies widely from 22.5 cube meters to 52 cube meters, we can manufacture it according to your needs.

Design proposal for the 20feet ISO tank container:
---Net capacity: not less than 25cubic; Shell of tank container Materials using Wisco Q235 High quality carbon steel 6mm baffle;
---Two feed inlets,bigger manhole covers, 2NOS. pssure vent valves( breather valve) ,at the end of the bottom ,DN80 dump valve(discharge valve). Screw of Openings and valves adopt stainless steel screws, single coaming board on the top of tank Molybdenum red reflective tape;
---framework is made of High quality steel, each one ladder at back and forth. With two acid resistant tube, two 4kg fire extinguishers.

20feet 29.5 Tanker Container Plaster Powder Tank Container for Sale

Dimension of the 20FT 29.5CBM Plaster Powder Tank Container
Description and Specification of Commodity
Loading Capacity	29500L
Overall Size/mm	6058*2438*2591
Tare	4500 KG
Air Source pssure	0.8~1.0Bar
Minimum Loading Weight	27800kgs
Shell Material	Shell Mild Steel Q345B,5.0mm shell,5.0 mm dish ends
Desity of the Plaster Powder	1.0-1.1tons/CBM
Standard fitting
Manhole	520mm diameter 6point fixing,2pcs.1 pc of 2inches' vent on the top of the tank
Compartment	Single Compartment
Strengthen Ribbers	Both sides and ends.
Tail Structure	Equipped with 6" butterfly valve and quick connector,and also equipped with inlet help-flowing fluidizer;Equipped with air inlet tube and air inlet quick connector;Equipped with pssure gauge and safety valve.
Ladder	Located on the left side of the tail with ladder.
Walkway on the top	400mm walkway,one vertical one,three Horizontal ones;
Remark:	The frame of this Tank container is very strong.

The functions of this series container tanker/Tank Container:
******This series tank semi trailers are suitable for the transportation of Bulk Cement/Flour/Coal/Plaster/Plastic granule/Lithium Hexafluorophosphate etc. Powder Material.
*** The volume varies widely from 22.5 cube meters to 52 cube meters, we can manufacture it according to your needs.

Design proposal for the 20feet ISO tank container:
---Net capacity: not less than 25cubic; Shell of tank container Materials using Wisco Q235 High quality carbon steel 6mm baffle;
---Two feed inlets,bigger manhole covers, 2NOS. pssure vent valves( breather valve) ,at the end of the bottom ,DN80 dump valve(discharge valve). Screw of Openings and valves adopt stainless steel screws, single coaming board on the top of tank Molybdenum red reflective tape;
---framework is made of High quality steel, each one ladder at back and forth. With two acid resistant tube, two 4kg fire extinguishers.

ISOTANK List

The Main Technical Parameters of Tanks ( Standard)
Item	Loading Medium	Model	Capacity (m3)	Design Pressure (Mpa)	Design Temperature (c)	Tank Material	Nominal Tank Thickness (mm)	Insulation	Tare weight (Kg)	Max. Gross Weight (Kg)	Dimension (LX WX H)(mm)	Loading Method
1	R134a	T50	24	1.38	-40 /+55	SA-612N	11	Sunshade	6400	34000	6058 X2438 X2591	Down load unload
2	R22		22	2.1	-40/+50		18		8800
3	R143a		22	2.42			20		9500
4	R125		22	2.75			21		9500
5	R32		20	3.44			25		10900
6	AHF	T19	21	1.0	-40/+55	SA516M NGr.485	12	No	6900			Up load unload
7	Trichlorosilan	T14	21	0.5	-40/+50	Q345R (16MnR)	12	No	6780	34000	6058 X2438 X2591
8	Liquid Chlorine	T50	20	1.7	-40/+50		16		8300
9			21.72	1.62			16		8900
10	Liquid Ammonia	T50	21.6	2.2	-40/+50	06Cr19Ni10	22	Packing Insulation	11970
11	SO2	T20	21	1.03	40 /+60	16MnDR	12	No	6900
12	Cryogenic Liquid	T75	19.8,20	0.75-2.35	-196/+50	Inner Tank: 06Cr19Ni10 Outside Tank:Q345R		Vacuum With Mutli-wrapped	8600/12880			Down load unload
The Main Technical Parameters of Tanks (China Standard)
Item	Loading Medium	Model	Capacity (m3)	Design Pressure (Mpa)	Design Temperature (c)	Tank Material	Nominal Tank Thickness (mm)	Insulation	Tare weight (Kg)	Max. Gross Weight (Kg)	Dimension (LX WX H)(mm)	Loading Method
1	R134a	T50	24	1.38	-40 /55	Q345 (16MnR)	12	Sunshade	6500	34000	6058 X2438 X2591	Down load unload
2	R22		20	2.1	-40/+50		16		7850
3			24				18		9100
4	R125		22	2.75			22		9900
5	R32		22	3.44			28		12000
6			23.7		-40 /55				12700

20ft T50 LPG ISO Tank Container LPG Propane Isobutane Gas Tank Container 24K
Mob :008615271357675

1. DRZ Cryogenic Storage Tank include the following ISO cryogenic tank:10ft, 12ft, 20ft, 40ft
2. Used for: liquid oxygen tank container, liquid nitrogen tank container, liquid argon tank container, liquid Nitrous Oxide tank container, liquid carbon dioxide tank container, LNG tank container, LPG tank container, AHF tank container, Liquid Chlorine tank container, liquid ammonia tank container.
3. Tank capacity: 7.7m3~60m3.
4. Tank pssure: 8bar, 16bar ,24Bar or based on user requirement.
5.certificate: RID/ADR, CFR49, IMDG, T75 UN PORTABLE, TIR ,UIC, CSC, TC, US DOT, UK-DFT, FRA

Hydrogen Peroxide Iso Containers, Stainless Steel Iso Tank Containers

Sulphuric Acid Iso Containers, Stainless Steel Iso Tank Containers

Nitric Acid Iso Containers, Stainless Steel Iso Tank Containers

Mining Chemicals Iso Containers, Stainless Steel Iso Tank Containers

Food Products Iso Containers, Stainless Steel Iso Tank Containers

Solvents Iso Containers, Stainless Steel Iso Tank Containers

Oils Iso Containers, Stainless Steel Iso Tank Containers

Resins Iso Containers, Stainless Steel Iso Tank Containers

Alcoholic Beverages Iso Containers, Stainless Steel Iso Tank Containers

Mo 1Iso Containers, Stainless Steel Iso Tank Containers

Imo Iso Containers, Stainless Steel Iso Tank Containers

Imo 5Iso Containers, Stainless Steel Iso Tank Containers

Imo 7Iso Containers, Stainless Steel Iso Tank Containers

Food Tank Containers And Iso Containers, Stainless Steel Iso Tank Containers

Tank Containers Containers And Iso Containers, Stainless Steel Iso Tank Containers

Iso Containers, Stainless Steel Iso Tank Containers Hazardous.

Iso Containers, Stainless Steel Iso Tank Containers Non-Hazardous Liquid Materials.

Horizontal Iso Tanks And Containers, Stainless Steel Iso Tank Containers

Vertical Iso Containers, Stainless Steel Iso Tank Containers

The Aim Of Iso Is To Create aStandardised Process Of Manufacture So That Things Can Be Interchangeable No Matter Where You Are. Having Products With An Iso Label Enables People To Know Exactly How The Product Will Work And Know Everything about It.

There Are Plenty Of Advantages For Using An Iso Tank. They Are aHighly Reliable, Cost Effective And Safe Way Of Transporting Bulk Liquids From Place To Place.

T9, T10,T11,T14,T50 portable tank Standard ISO tank 10.9K-26K cement tank,
PTFE/PE Lined tanksforhydrofluoric acid liquid ,hydrochloric acid ,sodium hypochlorite HCl,NaOH,NaClO liquid etc.
Insulation Tank for bitumen Liquid Asphalt,crude oil etc.Portable Tank Container
Tank Containers can be used to carry the following products:
Portable Tank Container
Products
ISO Tank-Ammonium Nitrate
ISO Tank-Bio-diesel
ISO Tank-Molasses
ISO Tank-Caster Oil
ISO Tank-Hexane
ISO Tank-Ethanol
ISO Tank-Ethylene
ISO Tank-Methanol

ISO Tank-IMO 1
ISO Tank-IMO 2
ISO Tank-IMO5
ISO Tank-Capacities ranging from 10,000 litres to 25,000 litres
ISO Tank-Swap Bodies with capacities ranging from 26,000 litres to 32,000 litres
ISO Tank-Bitumen tank containers 21,000 litres
ISO Tank-Off-shore tanks with capacities of 1,000 litres to 10,000 litres
IMO 1
ISO Tank-Shell made from 316 Stainless Steel
ISO Tank-Capacity of 12,000 -26,500 litres nominal
ISO Tank-MAWP of 4bar
ISO Tank-For transport of:
ISO Tank-Hazardous liquids
ISO Tank-Available in 7.65, 10, 20, or 30 foot sizes
ISO Tank-Also Swap-bodies 7.65m and 7.82 (30,000-35,000 litres)
ISO Tank-Heating by steam or electric heating (optional)
ISO Tank-
Cooling by Glycol (optional)
Please contact us if you require further information and/or aquotation.(Contact Details above)
IMO 2
ISO Tank-Shell made from 316 Stainless Steel
ISO Tank-Capacity of 12,000 -26,500 litres nominal
ISO Tank-MAWP of 1.75 bar
ISO Tank-For transport of:
ISO Tank-Low Hazardous liquids
ISO Tank-Available in 7.65, 10, 20, or 30 foot sizes
ISO Tank-Also Swap-bodies 7.65m and 7.82 (30,000-35,000 litres)
ISO Tank-Heating by steam or electric heating
ISO Tank-Cooling by Glycol
Please contact us if you require further information and/or aquotation.(Contact Details above)
IMO 0
ISO Tank-Shell made from 316 Stainless Steel
ISO Tank-Capacity of 12000 -26500 litres nominal
ISO Tank-MAWP of 4bar
ISO Tank-For transport of
ISO Tank-Wine
ISO Tank-Fruit Juices
ISO Tank-Vegetable Oils
ISO Tank-Mineral Oils
ISO Tank-Non-hazardous Oils
ISO Tank-Available in 20 foot /6 metres
ISO Tank-Also Swap-bodies 7.65m and 7.82 (30,000-35,000 litres)
ISO Tank-Heating by steam or electric heating (optional)
ISO Tank-
Cooling by Glycol (optional)
Please contact us if you require further information and/or aquotation.(Contact Details above)
IMO 5
ISO Tank-Shell made from 316 Stainless Steel
ISO Tank-Capacity of 15,000 -25,500 litres nominal
ISO Tank-MAWP of 1.75 bar
ISO Tank-For transport of gases, including:
ISO Tank-Propane
ISO Tank-Butane
ISO Tank-Refrigerants
ISO Tank-Available in 20, 30 or 40 foot sizes
ISO Tank-Cooling by sun-shieldPlease contact us if you require further information and/or aquotation.(Contact Details above)IMO 7
ISO Tank-Shell made from 316 Stainless Steel or Carbon Steel
ISO Tank-Capacity of 20,000 -24,000 litres nominal
ISO Tank-MAWP of 8bar
ISO Tank-For transport of cryogenic gases, including:
ISO Tank-LNG
ISO Tank-Available in 10, 20, 30 or 40 foot sizes
ISO Tank-Cooling by glycolPlease contact us if you require further information and/or aquotation.(Contact Details above)
Bitumen Tank Containers
ISO Tank-Shell made from Carbon Steel
ISO Tank-Capacity of 20,000-25,000 litres nominal
ISO Tank-MAWP of 1.75 bar
ISO Tank-Low Hazardous liquids
ISO Tank-Available in 20 or 30 foot sizes
ISO Tank-Also Swap-bodies 7.15m (30,000 litres) and 7.82 (35,000 litres)
ISO Tank-Heating by direct flame, hot oil or electric heatingPlease contact us if you require further information and/or aquotation.(Contact Details above)
Cement Containers
ISO Tank-Capacity of 17.5 -25 cubic metres
ISO Tank-Pressure dischargeOffshore
ISO Tank-Shell made from 316 Stainless Steel
ISO Tank-Capacity of 2,000 -10,000 litres
ISO Tank-MAWP of 5bar
ISO Tank-For transport of gases, including:
ISO Tank-Hazardous chemicals
ISO Tank-Acid
ISO Tank-Petroleum
ISO Tank-Available in 8x 8x 10 sizes
ISO Tank-Heated by steam or electric (optional)

The highly hazardous tank container is an IMO 1, T11, T14, T20 or T22 stainless steel container with acapacity range between 14.600 and 24.000 liters. The tank containers we offer are suitable to transport highly hazardous and often corrosive cargoes. The tanks comply to all international regulations including -U Stamp (T20 and T22). We have avariety of tank containers with either arubber, resign or plastic lining. Other types and modifications include tank containers with baffle plates, bolted manlids, valve actuators, coated valves, coated spill boxes, gauges and different top discharge connections. Other safety related fittings or connections improving the operational flexibility can also be attached.

Beside the options shown, awide range of other modifications and fittings is available. Please share your enquiry and we will specify the most suitable tank container for your business. During this process we will take into account the product(s) to be loaded, the area of operation and any loading or discharge pferences. Our goal is to provide you with the most optimal tank taking both income and costs into consideration.

ISO Tank, ISO Tank Containers

Manufacturers &Exporters

ISO Containers, stainless steel ISO tank containers, IMO tank containers for All types of Water ,Hydrogen Peroxide ,Sulphuric Acid ,Nitric Acid ,Mining chemicals ,Food Products ,Solvents, Oils ,Resins ,Alcoholic Beverages ,MO 1,IMO 2IMO 2,IMO 5IMO 5,IMO 7IMO 7,Food Tank Containers and UN portable tanks that can be used to ship ahazardous and non-hazardous liquid materials. Our ISO tanks is versatile tanks and ISO standards tanks, many different kind of can be equipped with insulation ISO tanks, steam heating ISO tank, electric heating ISO tank or refrigeration for products that require temperature control, top and/or bottom discharge valve and pipeline systems ,protective linings if required and other modifications we will provide as per customer requirement. Products stored or transported by these containers vary from non-hazardous and hazardous chemicals ISO tanks. These specially ISO tanks units are specially designed for transportation of bulk liquid product to, from and between fixed and/or mobile consumption points and where house delivery.

The bulk liquids that can be transported in an ISO tank include :

Swap body tank ISO tank ,ISO Tank Containers- aswap body has abigger tank which is larger than the frame, usually 23 or 25 feet (7.01 or 7.62 meters) long

Food-grade tank -ISO tank ,ISO Tank Containers- astandard tank container which can only be loaded with foodgrade products

ISO tank ,ISO Tank Containers Reefer tank -a tank with the ability to cool the product to be transported

ISO tank ,ISO Tank ContainersGas tank -a tank that is suitable for the transport of gases

Silo tank ISO tank ,ISO Tank Containers- atank for the transport of grains and powders

T1 ISO tank container for wine and light liquids (ISO tank ,ISO Tank Containers)

T4 ISO tank container for non-hazardous edible and non-edible oils (ISO tank ,ISO Tank Containers)

T11 ISO tank container for non-hazardous chemicals -ISO tank ,ISO Tank Containers

T14 ISO tank container for hazardous chemicals and acids like HCl and zinc chloride -ISO tank ,ISO Tank Containers

T50 ISO tank container for LPG and ammonia gas -ISO tank ,ISO Tank Containers

SWAP tank container (for cargo above 26,000 to 32,000 metric tons or 25,600 to 31,500 long tons or 28,700 to 35,300 short tons ISO tank ,ISO Tank Containers

Rubber-lined ISO tank container for acid-based chemicals best for ISO tank ,ISO Tank Containers

PE Linedsteeltanksfor hydrofluoric acid liquid ,hydrochloric acid ,sodium hypochlorite HCl,NaOH,NaClO liquid etc.

Hazardous chemicals

Acid

Petroleum

ISO Tank

ISO 40' LNG Tank Container	Bitumen tank container	ISO 20' Tank Container
IMO 1 Shell made from 316 Stainless Steel Capacity of 12,000 -26,500 litres nominal MAWP of 4bar For transport of: Hazardous liquids Available in 7.65, 10, 20, or 30 foot sizes Swap-bodies 7.65m and 7.82 (30,000-35,000 litres) Heating by steam or electric heating (optional) IMO 0 Shell made from 316 Stainless Steel Capacity of 12000 -26500 litres nominal MAWP of 4bar For transport of Wine Fruit Juices Vegetable Oils Mineral Oils Non-hazardous Oils Available in 20 foot /6 metres Swap-bodies 7.65m and 7.82 (30,000-35,000 litres) Heating by steam or electric heating (optional)	IMO 2 Shell made from 316 Stainless Steel Capacity of 12,000 -26,500 litres nominal MAWP of 1.75 bar For transport of:Low Hazardous liquids Available in 7.65, 10, 20, or 30 foot sizes Swap-bodies 7.65m and 7.82 (30,000-35,000 L) Heating by steam or electric heating Bitumen Tank Containers Shell made from Carbon Steel Capacity of 20,000-25,000 litres nominal MAWP of 1.75 bar Low Hazardous liquids Available in 20 or 30 foot sizes Heating by direct flame, hot oil or electric heating Cement Containers Capacity of 17.5 -25 cubic metres Pressure discharge Road transport tank container T4,T6,T7,T8,T9, T10,T11,T14,T50 portable tank; PE Linedsteeltanksfor hydrofluoric acid liquid ,hydrochloric acid ,sodium hypochlorite HCl,NaOH,NaClO liquid etc.	IMO 5 Shell made from 316 Stainless Steel Capacity of 15,000 -25,500 litres nominal MAWP of 1.75 bar For transport of gases, including: Propane Butane Refrigerants Available in 20, 30 or 40 foot sizes IMO 7 Shell made from 316 Stainless Steel or Carbon Steel Capacity of 20,000 -24,000 litres nominal MAWP of 8bar For transport of cryogenic gases, including: LNG Available in 10, 20, 30 or 40 foot sizes Offshore Shell made from 316 Stainless Steel Capacity of 2,000 -10,000 litres MAWP of 5bar For transport of gases, including: Hazardous chemicals Acid Petroleum Available in 8x 8x 10 sizes

Highly Hazardous UN Portable ISO Tank Containers 14,600 -24,000 Liters

Highly Hazardous UN Portable ISO Tank Containers
IMO 1, T11 /T14 /T20 /T22 UN portable tank container (14,600 -24,000 liters

A
UN 1701 to UN 1800[edit]
UN NumberClassProper Shipping Name
UN 17016.1Xylyl bromide, liquid
UN 17026.11,1,2,2-Tetrachloroethane

UN 17046.1Tetraethyl dithiopyrophosphate
UN 1705?(UN No. no longer in use) Tetraethyl pyrophosphate and compssed gas mixture (UN No. no longer in use)[1]

UN 17076.1Thallium compounds, n.o.s.
UN 17086.1Toluidines, liquid
UN 17096.12,4-Toluylenediamine, solid (2,4-Toluenediamine)
UN 17106.1Trichloroethylene
UN 17116.1Xylidines, liquid
UN 17126.1Zinc arsenate or Zinc arsenite or Zinc arsenate and zinc arsenite mixtures
UN 17136.1Zinc cyanide
UN 17144.3Zinc phosphide
UN 17158Acetic anhydride
UN 17168Acetyl bromide
UN 17173Acetyl chloride
UN 17188Butyl acid phosphate
UN 17198Caustic alkali liquid, n.o.s.
UN 1720 to 1721(UN No.s no longer in use)
UN 17226.1Allyl chloroformate
UN 17233Allyl iodide
UN 17248Allyltrichlorosilane, stabilized
UN 17258Aluminum bromide, anhydrous
UN 17268Aluminum chloride, anhydrous
UN 17278Ammonium hydrogendifluoride, solid
UN 17288Amyltrichlorosilane
UN 17298Anisoyl chloride
UN 17308Antimony pentachloride, liquid
UN 17318Antimony pentachloride, solution
UN 17328Antimony pentafluoride
UN 17338Antimony trichloride

UN 17368Benzoyl chloride
UN 17376.1Benzyl bromide
UN 17386.1Benzyl chloride or Benzyl chloride unstabilized
UN 17398Benzyl chloroformate
UN 17408Hydrogen difluorides, n.o.s. solid
UN 17412.3Boron trichloride
UN 17428Boron trifluoride acetic acid complex
UN 17438Boron trifluoride propionic acid complex
UN 17448Bromine or Bromine solutions
UN 17455.1Bromine pentafluoride
UN 17465.1Bromine trifluoride
UN 17478Butyltrichlorosilane
UN 17485.1Calcium hypochlorite, dry or Calcium hypochlorite mixtures dry with more than 39 percent available chlorine (8.8 percent available oxygen)
UN 17492.3Chlorine trifluoride
UN 17506.1Chloroacetic acid, solution
UN 17516.1Chloroacetic acid, solid
UN 17526.1Chloroacetyl chloride
UN 17538Chlorophenyltrichlorosilane
UN 17548Chlorosulfonic acid (with or without sulfur trioxide)
UN 17558Chromic acid solution
UN 17568Chromic fluoride, solid
UN 17578Chromic fluoride, solution
UN 17588Chromium oxychloride
UN 17598Corrosive solids, n.o.s.
UN 17608Corrosive liquids, n.o.s.
UN 17618Cupriethylenediamine solution
UN 17628Cyclohexenyltrichlorosilane
UN 17638Cyclohexyltrichlorosilane
UN 17648Dichloroacetic acid
UN 17658Dichloroacetyl chloride
UN 17668Dichlorophenyltrichlorosilane
UN 17678Diethyldichlorosilane
UN 17688Difluorophosphoric acid, anhydrous
UN 17698Diphenyldichlorosilane
UN 17708Diphenylmethyl bromide
UN 17718Dodecyltrichlorosilane

UN 17738Ferric chloride, anhydrous
UN 17748Fire extinguisher charges, corrosive liquid
UN 17758Fluoroboric acid
UN 17768Fluorophosphoric acid anhydrous
UN 17778Fluorosulfonic acid
UN 17788Fluorosilicic acid
UN 17798Formic acid
UN 17808Fumaryl chloride
UN 17818Hexadecyltrichlorosilane
UN 17828Hexafluorophosphoric acid
UN 17838Hexamethylenediamine solution
UN 17848Hexyltrichlorosilane

UN 17868Hydrofluoric acid and Sulfuric acid mixtures
UN 17878Hydriodic acid
UN 17888Hydrobromic acid, with more than 49 percent hydrobromic acid or Hydrobromic acid, with not more than 49 percent hydrobromic acid
UN 17898Hydrochloric acid
UN 17908Hydrofluoric acid, with more than 60 percent strength or Hydrofluoric acid, with not more than 60 percent strength
UN 17918Hypochlorite solutions
UN 17928Iodine monochloride, solid
UN 17938Isopropyl acid phosphate
UN 17948Lead sulfate with more than 3percent free acid

UN 17968Nitrating acid mixtures, with more than 50 percent nitric acid or Nitrating acid mixtures, with not more than 50 percent nitric acid

UN 17998Nonyltrichlorosilane
UN 18008Octadecyltrichlorosilane

Hubei Dong Runze Special Vehicle Equipment Co., Ltd.

FAST DEPENDABLE SPECIAL TRUCKS & TRAILERS & SPARE PARTS SUPPLIER FROM China

Business range including trucks, trailers, mobile generators, machinery and auto parts, vehicle-mounted tank, automotive parts sales; Import and export business. We produce varieties of special vehicles, such as water tank truck, fuel/oil tank truck, chemical liquid tank truck, dump truck, truck mounted crane, concrete mixer truck, aerial platform truck, bulk powder tanker truck, asphalt/bitumen truck, sewage vacuum truck, septic(fecal) suction truck, garbage truck, road wrecker, fire fighting truck, refrigerator wagon, tractor, trailers, semi-trailers for oil, asphalt, bulk powder, container, LNG transportation, Low bed, tipper, skeleton semi trailer, etc., which are widely used in environment and sanitation, virescence, architecture, transportation, oil mining and many other fields.

With more than 10 years′ producing experience, we have shipped our vehicles to many countries worldwide ---- Angola, Algeria, Nigeria, Congo, Libya, Gambia, Ghana, Ethiopia, Mozambique, Tanzania, Sudan, Mali, Niger, Namibia, Jordan, Iraq, Qatar, Uzbekistan, Kazakhstan, Kyrgyzstan, Armenia, Bangladesh, Sri Lanka, North Korea, Philippines, Myanmar, Vietnam, Chile, Venezuela, Trinidad, etc.

Specialize in SHACMAN, FOTON, FAW, Dongfeng, North Benz -Beiben, ISUZU, DF Nissan-UD, HINO, JMC, JAC, SAIC Iveco, Hualing-CAMC trucks & semi-trailer customizaton business.

Business Scope: Trucks, Trailers, Mobile Generators, Environmental Protection Machinery, Auto Parts, Vehicle-Mounted Tank, Automotive Parts; Stroller, Tools, Hardware, Machinery, Electronic Products, Household Appliances, Building Materials, Arts And Crafts, Translation, Management Consulting, International Freight Forwarding, All Kinds Of Goods And Technology Import And Export Business

Customizing Whollesale manufacturers of famous brand truck, welcome to wholesale tankers, semi trailer, truck parts of good capacity at competitive price from our factory.

With more than 10 years′ producing experience, we have shipped our vehicles to many countries worldwide ----Nigeria, Congo, Ghana, Zambia, Tanzania, Sudan, Uzbekistan, Sri Lanka, Korea, Myanmar, Vietnam, Chile, Argentina, Peru etc.

Enterprise Culture

Enterprise Purpose: Establish typical example of fire civilization by science.

Enterprise Target: Create rich rewards for customers, for shareholders, and for company.

Enterprise Spirit: Unity, Preciseness, Self-improvement, Endeavour.

Enterprise Values: For society, for our country, for company, for staff.

Enterprise Concept: Quality is our dignity.

Professional Power

China′s largest supplier of the "one-stop"Special Vehicle Equipment, Commercial Vehicle Body Building Trucks & Trailers & Spare Parts Solution China′s Largest Customizer, Supplier.