INSULATION MANLIFT ISUZU Trucks Telescopic Boom with 22m-24m height of the platfrom Aerial Working Trucks for Street Lights maintenance
Japan Truck Aerial Work Platform Truck (ISUZU-High Lifting Truck 18 -22meters Manlift Basket)
Brand Japan Crane Truck With Bucket Lift for Electric Companies With I.SUZU Engine Crane Truck With Bucket Lift for Electric Companies
Custermizing Crane Truck With Bucket Lift for Electric working
Telescopic Aerial Platform
fully Hydraulically Operate Arial Work Platforms
20.5m Aerial Working Truck
Color: whiteCabin, white Body
Drive type: LHD
Cabin: with A/C
Engine Brand: 4HK1-TC50
Engine power: 151KW / 205HP
Tyre:10.00R20
Max.Working Height: 20m
With A/C Power steering
for street Lights maintenance, Landscping trees.
Aerial Working Platform High Altitude Working Truck for Street Lamp MaintenanceFunction:
Telescopic beam lifter truck (also called aerial telescopic platform truck, hydraulic aerial cage, overhead working truck, truck platform, beam lifter vehicle, truck mounted insulated aerial lift, telescopic boom truck, high-altitude operation truck)is ideal for maintenance of traffic lights, street lights, landscaping trees, cleaning/setting signboard and other high aerial works.
ISUZUINSULATIONMANLIFT18mSpecification:
Specifications ISUZUINSULATIONMANLIFT18m | ||
Model Engine | Driving type: 4*2 left hand driving Make: ISUZU Diesel 4-stroke direct injection diesel engine, Electronic control Engine model: 4HK1-TC51 , Euro 4 -5 emission standard 4-cylinder in-line with water cooling, turbo-charging and intercooling Maximum output: 192 hp (141 Kw) at 2600 rpm Maximum torque: 510 Nm 1600 r/min Number of cylinder: Displacement: 5.193 L Specific fuel consumption: 132 g/kWh Engine oil filling quantity: 19 l Cooling system filling quantity (long-term filling): 40 l Thermostat with 71ºC opening begin Single cylinder air compssor Rigid fan | |
Transmission | ISUZU MLD, Manual | |
Propeller Shaft | Double universal joint propeller shaft with gear-shaped coupling flange | |
Front Axle | ISUZU 3T, Steering with doubleT-cross section beam | |
Rear Axle | ISUZU 6T, Pressed axle housing, central single reduction with hub reduction and with differential locks between wheels and axles . Ratio:4.1 or 4.33 | |
Chassis | frame: U-profile parallel ladder frame, and reinforced subframe all cold riveted cross members, Manganese steel | |
Front suspension: leaf spring, hydraulic telescopic double-action shock absorbers and stabilizer Rear suspension:leaf semi-elliptic springs, bogie spring and stabilizer Aluminium fuel tank: 200 L capacity with locking fuel cap, fitted to the off side of the chassis | ||
Brakes | Service brake: dual circuit compssed air brake Parking brake (emergency brake): spring energy, compssed air operating on front shaft and rear wheels Auxiliary brake: engine exhaust brake | |
Wheels & Tyres | Tire: 235/75R17.5 Radial tire | |
Driver's Cab | Standard cab, with 3 seats, 2-arm windscreen wiper system with three speeds, damped adjustable driver's seat, with heating and ventilating system, exterior sun visor, safety belts, adjustable steering wheel, air horn, 24V USB, with transverse stabilizer,with 4-point support fully floating suspension + shock absorber, Air suspension dirver seats | |
Electrics | Operating voltage: 24 V, negative grounded Starter: 24 V, 5.4 Kw Alternator: 3-phase, 28 V, 1500 W Batteries: 2 x 12 V, 165 Ah Cigar-lighter, horn, headlamps, fog lights, brake lights, indicators and reverse light | |
Instrument Panel | Active check central controllor with indicators, with this integral instrument the daily manual checks on the vehicle and combined indicators of compssed air pssure, coolant temperature, engine oil pssure and battery charging | |
Dimensions mm | Wheel base Front wheel track Rear wheel track Front overhang Rear overhang Approach angle (0) Departure angle (0) Overall length Overall width Overall height | 3815 1680 1650 1110 2055 20 17 7000 2270 3700 |
Weight kg | Dead weight Maximum Loading Capacity Gross vehicle weight Front axle loading capacity Rear axle loading capacity | 5380 4000 9300 3000 6000 |
Performance | Maximum driving speed (km/h) Maximum gradeability (%) Minimum ground clearance (mm) Fuel consumption (l/100 km) | 80 34 278 18 |
MANLIFT ( China Brand) | Bucket rated load: | 280kg |
Insulation bucket | Yes | |
Lower arm insulation length | 0.61m | |
Upper arm insulation length | 4.40m | |
Rotation platform | 360° continuous rotation, work bucket ±90° | |
Swing speed | 0~2 r/min | |
Wire voltage | 35KV | |
Maximum Working height | 18.5m | |
Operating range at maximum working height | 2.3 m | |
Work bucket maximum operating range | 11.3m | |
Working height at maximum working range | 8 m | |
Rated lifting weight | 454kgs | |
Lifting height by maximum lifting capacity | 18.5m | |
Lifting weight by maximum lifting height | 454kgs | |
(1) Operating system: two operating systems of work bucket and get off; full hydraulic control system; two operations of getting off and working bucket, the upper control adopts three- dimensional single-handle control, and the operation is simple and convenient. It adopts hydraulic and pneumatic control, durable and excellent insulation performance. (2) Hydraulic system: full hydraulic proportional control, stepless speed regulation (3) Safety device: interlocking of upper and lower vehicles, soft leg protection, horizontal leg full extension detection alarm , two-way balancing valve, two-way hydraulic lock, vehicle level (4) leveling system: equal volume cylinder hydrostatic leveling system | ||
Quotation USD | CIF | $ |
Maximum working height | 20.5m |
Maximum operating range | 12m |
Effective insulation length of upper arm | 4.4m |
Effective insulation length of lower wall | 0.61m |
Upper arm running Angle | -19°~+85° |
Operating Angle of lower arm | -3°~+85° |
Continuous tyre turnover | 360° |
A small crane lifts the maximum | 450kg |
Maximum load bearing of working bucket | 340kg |
The bucket rotates horizontally | ±90° |
Chassis brand/model | ISUZU/QL1160VMFRY |
The total quality | 13185kg |
Engine model | 4HKI-TC50 |
Rated power | 151kw |
The wheelbase | 4500mm |
CIF | $ |
Overall dimension: | 8310×2498×3730(mm) | ||
Total quality: | 13185(Kg) | Packing quality: | 12990(Kg) |
Packing quality: | 12990(Kg) | Front passenger: | 3 |
Approach Angle/departure Angle: | 15/15(°) | Front/rear suspension: | 1335/2475(mm) |
Axial load: | 4365/8820 | Wheel base: | 4500(mm) |
Shaft: | 2 | Maximum speed: | 105(km/h) |
Anti-lock system: | yes | Number of spring sheets: | 7/7+5 |
Tyre number: | 6 | Tyre specifications: | 10.00R20 16PR,11.00R22.5 16PR |
Before the wheel track: | 1960 | After the wheel track: | 1855 |
Functions of ISUZU Aerial Platform Truck 22m-24 :
ISUZU Aerial Platform Trucks also Name Bucket Lift Trucks, Articulated boom Lift Truck, Basket crane trucks, Truck Mounted Lift Truck. it used for maintenance of traffic Lights, Steet Lights, ladnscaping trees, cleaning setting signboard and other high aerial works.
we have Knuckled boom Aerial Platform and telescopic platform trucks for choice from 6m to 24m available.
Features of ISUZU Aerial Platform Trucks:
ISUZU Aerial Platform Trucks ensures perfect driving performance;
working cage can be made of structure or reinforced fiberglass (insulated cage);
working cage can rotate 90 degree in left and right;
4pcs outriggers and front support improve operation stability and safety;
safety devices are available, such as relief valves, balance valves, double way hydraulic locks, motor emergency system. ect.
wireless motor control system is availalbe;
Products Technical SpecificationofProducts Technical Specification of Aerial Working Trucks ISUZU FTR street lights maintenance trucks. | |||
Type | 22m arieal working truck | ||
Brand | ISUZU 4*2 | ||
Cab | With A/C, on bed | ||
Vehicle Description | |||
Overall dimensions(mm) | 10100*2500*3900 | ||
Curb weight(vehicle) (kg) | 14300 | ||
Max speed (Km/h) | 110 | ||
Engine | |||
Mode | 4HK1-TC50 | ||
Type | Diesel, 4-cylinder in line with water cooling, turbo-charging | ||
Max. power/rotated speed | 151(KW) | ||
Max. torque | 650(N.m) | ||
Displacement(ML) | 5193 | ||
Company of engine | ISUZU Motor | ||
Emission level | Euro 5 | ||
Chassis Description | |||
Wheel base | 4700 | ||
Front axle | Elliot I-beam type 6.3T | ||
Rear axle | Driving axle, 13T | ||
Number of leaf spring of suspension | 15/17 | ||
Front overhang / rear overhang | 1335/2890 | ||
Front tread / rear tread | 1960/1855 | ||
Approach angle /Departure angle | 15/17 | ||
Gear box | 6-speed with over drive | ||
Brake system | Air braking | ||
Operation control system | Power Steering | ||
Electric system | 24V | ||
Tyres | 10.00R20 | ||
Aerial wrking parameter | |||
Max. working height | 22m | ||
Max. working radius | 7.5m | ||
Loading weight of working hook | 200kg | ||
Swing angle | 360degree | ||
Swing speed | 0-2r/min | ||
Supporting legs | 4sets hydraulic supporting legs |
Pictures of ISUZU Aerial Platform Trucks for Street Lights Maintenance:
The pictures are for your reference only.Main parameter:
1. Working platform can rotary 90degree left and right. Convenient and flexible work, wide range working.
2. The working platform has the weight function and real time display. Overload alarm.
3.Five telescopic boom, four section boomssynchronous expansion, high operation efficiency, wide range working.
4.Hexagon sectionworking boom, high strength material produce, better reliability.
5.Equip DC emergency electric pump, to provide emergency protection.
6. Equip with wirelesscommunication,convenient staffscommunicationon the ground and working platform, to improve working efficiency.
7.Equipwith a large screen display on the ground and workingplatform.Real-time display the vehicle operators.
8. Equipstrobe lights, lamp
9.Electric hydraulic operation mode, high operation efficiency
10.Therotating device can be adjusted easily.
11.Rotatingplatform can be rotated 360 degree.
23mtelescopicboom truck | ||||
Outside dimension | L*W*H | mm | 8720*2350*2950 | |
weight | Passengers | person | 4 | |
Total weight | kg | 10800 | ||
Main parameter | Loading capacity of working platform | kg | 220 | |
Max. Working height | m | 23 | ||
Working radius of Max. Working height | m | 5.05 | ||
Max. Working Radius | m | 12.6 | ||
Working height of Max. Working radius | m | 5.6 | ||
Supporting landing | horizontal | mm | 4200 | |
vertical | mm | 4200 |
MainEquipment of FTR ISUZU Telescopic Boom Aerial Working Truck 23m Working Height | |
Working platform and fence | Antiskid walking board and stainless steel fence |
PTO system | Pneumatic operation |
Working platform size | 1100x700x1150 |
Boom style | Five telescopic boom, four section booms synchronous expansion |
Boom lifting style | Boom lifting up and down |
Rotation device | 360 degree Continuous rotation |
Supporting landing | H, adjusted separately |
Operation | Remote control on the working platform or on the ground, electric operation. Hydraulic operation turntable. |
Control system | Load sensitive proportional control system, stepless speed regulation. |
Leveling system | Hydraulic automatic leveling. |
Acutal pictures of FTR ISUZU Telescopic Boom Aerial Working Truck 22 - 23m Working Height
Product name | Aerial bucket truck | Options | |
Producer | DRZ | ||
Brand | Hubei Dong Runze Special Vehicle Equipment Co., Ltd | ||
Max Working Height | 20 meters | ||
Overall dimention | 7400x2610x3850(mm) | ||
Boom Type | Telescopic boom | ||
Section of Boom | 5-section | 12~32m | |
Working Raduim | 14.7 meters | ||
Platform bucket load | max 200kg, 1000x680x1200mm | ||
Chassis Brand | I.SU.ZU FTR | Dongfeng, Forland,Sinotruk,etc | |
Drive cab | Single cab, LHD, with a sleeper | ||
Engine | 190hp Euro 4 diesel engine | ||
Brake | Air brake | ||
Steering | Power steering | ||
Transmission | MT, 6 forward gears and 1 rear gear | ||
Others | Power window, central lock, A/C | ||
Wheelbase | 3900mm | ||
Tire | 9.00-20 radial tire, 6+1 | ||
Max speed | 90km/h | ||
Main Safety System | |||
Emergency pump | Included, When the engine and main pump fail, workers can be sent back to the ground | ||
Engine on/off on basket | Included | ||
Automatic interlock device | Basket and gound control lock, the two can't operation at same time | ||
Level detection function | Real-time detection of whether the vehicle is horizontal | ||
Emergency stop device | For emergency stop operation | ||
Night safety warning device | There are engineering strobes and lights on the vehicle | ||
Vehicle level status tester | Can detect the horizontal and vertical tilt of the vehicle |
Specification:
ISUZU mounted Crane truck ( 3.2Ton boom crane SQ3SK2Q) | ||
General | Vehicle Brand | DONG RUN ZETRUCKS |
Chassis Brand | I.S.U.Z.U | |
Overall Dimension | 6500 * 2100 * 3100 mm | |
GVW / Kerb Weight | 7,300kg / 4,000kg | |
Cab | Cab Capacity | 2 persons allowed |
Air Conditioner | Heating/cooling air conditioner | |
Engine | Fuel Type | Diesel |
Engine Brand | I.S.U.Z.U | |
Power | 130 HP(88 KW) 4KH1 | |
Displacement | 2999 ml | |
Emission Standard | Euro 4 or 5 | |
Chassis | Drive Type | 4X2, (Left hand drive ONLY) |
Transmission | Manual MSB 5 speed levers with 1 reverse | |
Wheelbase/No. of axle | 3360 mm / 2 | |
Tire Specification | 7.00-16 | |
Tire Number | 6 tires and 1 spare tire | |
Max Speed | 90 km/h | |
Paint | metallic paint | |
Superstructure | Cargo Box Dimension | 4000*1900*500 mm |
Crane Type | Telescpoic boom crane | |
Max Lifting Capacity | 3200 kg | |
Slewing Angle | 360° All rotation | |
Crane Weight | 1229kg | |
Installation Space | 850 mm | |
Control panel | English orYour language | |
All standard accessories: Basic tool kit, English manual... | ||
Optional | ** Knuckle boom crane. ** Hydraulic tipper box. ** Box thickness according to requirement. ** Box height could be nominated |
Items | Parameter | ||
Truck Model | 5070JSQ2 | ||
Crane Parameter | Max Lifting Capacity | 3200 kg | |
Max Lifting Moment | 6.8 T.M | ||
Recommend Power | 14 kw | ||
Max Oil Flow of Hydraulic System | 25 L/min | ||
Max Pressure of Hydraulic System | 20 Mpa | ||
Oil Tank Weight | 30 L | ||
Crane Weight | 1229 kg | ||
Installation Space | 850 mm | ||
Rotation Angle | 360° All Rotation | ||
CargoBody | Thickness | Side | 2mm |
Floor | 3mm |
Similar Key Words:hydraulic boomlifter, overhead working truck, truck mounted aerial platform, aerial beam lifter, man lift truck, articulated basket platform, skylift, insulated aerial cage truck
www.truckinchina.com
PACKING & DELIVERYAerial platform truck 16m water tank and water pump ,Truck Mounted Aerial Work Platform water tank,Work Platform Water Tank Truck,aerial bucket truck water tank,bucket truck with water tank ,Truck Mounted water tank Aerial Work Platform
INSULATION MANLIFT ISUZU Trucks Telescopic Boom with 22m-24m height of the platfrom Aerial Working Trucks for Street Lights maintenance
Japan Truck Aerial Work Platform Truck (ISUZU-High Lifting Truck 18 -22meters Manlift Basket)
Brand Japan Crane Truck With Bucket Lift for Electric Companies With I.SUZU Engine Crane Truck With Bucket Lift for Electric Companies
Custermizing Crane Truck With Bucket Lift for Electric working
Telescopic Aerial Platform
fully Hydraulically Operate Arial Work Platforms
20.5m Aerial Working Truck
Color: whiteCabin, white Body
Drive type: LHD
Cabin: with A/C
Engine Brand: 4HK1-TC50
Engine power: 151KW / 205HP
Tyre:10.00R20
Max.Working Height: 20m
With A/C Power steering
for street Lights maintenance, Landscping trees.
Aerial Working Platform High Altitude Working Truck for Street Lamp MaintenanceFunction:
Telescopic beam lifter truck (also called aerial telescopic platform truck, hydraulic aerial cage, overhead working truck, truck platform, beam lifter vehicle, truck mounted insulated aerial lift, telescopic boom truck, high-altitude operation truck)is ideal for maintenance of traffic lights, street lights, landscaping trees, cleaning/setting signboard and other high aerial works.
ISUZUINSULATIONMANLIFT18mSpecification:
Specifications ISUZUINSULATIONMANLIFT18m | ||
Model Engine | Driving type: 4*2 left hand driving Make: ISUZU Diesel 4-stroke direct injection diesel engine, Electronic control Engine model: 4HK1-TC51 , Euro 4 -5 emission standard 4-cylinder in-line with water cooling, turbo-charging and intercooling Maximum output: 192 hp (141 Kw) at 2600 rpm Maximum torque: 510 Nm 1600 r/min Number of cylinder: Displacement: 5.193 L Specific fuel consumption: 132 g/kWh Engine oil filling quantity: 19 l Cooling system filling quantity (long-term filling): 40 l Thermostat with 71ºC opening begin Single cylinder air compssor Rigid fan | |
Transmission | ISUZU MLD, Manual | |
Propeller Shaft | Double universal joint propeller shaft with gear-shaped coupling flange | |
Front Axle | ISUZU 3T, Steering with doubleT-cross section beam | |
Rear Axle | ISUZU 6T, Pressed axle housing, central single reduction with hub reduction and with differential locks between wheels and axles . Ratio:4.1 or 4.33 | |
Chassis | frame: U-profile parallel ladder frame, and reinforced subframe all cold riveted cross members, Manganese steel | |
Front suspension: leaf spring, hydraulic telescopic double-action shock absorbers and stabilizer Rear suspension:leaf semi-elliptic springs, bogie spring and stabilizer Aluminium fuel tank: 200 L capacity with locking fuel cap, fitted to the off side of the chassis | ||
Brakes | Service brake: dual circuit compssed air brake Parking brake (emergency brake): spring energy, compssed air operating on front shaft and rear wheels Auxiliary brake: engine exhaust brake | |
Wheels & Tyres | Tire: 235/75R17.5 Radial tire | |
Driver's Cab | Standard cab, with 3 seats, 2-arm windscreen wiper system with three speeds, damped adjustable driver's seat, with heating and ventilating system, exterior sun visor, safety belts, adjustable steering wheel, air horn, 24V USB, with transverse stabilizer,with 4-point support fully floating suspension + shock absorber, Air suspension dirver seats | |
Electrics | Operating voltage: 24 V, negative grounded Starter: 24 V, 5.4 Kw Alternator: 3-phase, 28 V, 1500 W Batteries: 2 x 12 V, 165 Ah Cigar-lighter, horn, headlamps, fog lights, brake lights, indicators and reverse light | |
Instrument Panel | Active check central controllor with indicators, with this integral instrument the daily manual checks on the vehicle and combined indicators of compssed air pssure, coolant temperature, engine oil pssure and battery charging | |
Dimensions mm | Wheel base Front wheel track Rear wheel track Front overhang Rear overhang Approach angle (0) Departure angle (0) Overall length Overall width Overall height | 3815 1680 1650 1110 2055 20 17 7000 2270 3700 |
Weight kg | Dead weight Maximum Loading Capacity Gross vehicle weight Front axle loading capacity Rear axle loading capacity | 5380 4000 9300 3000 6000 |
Performance | Maximum driving speed (km/h) Maximum gradeability (%) Minimum ground clearance (mm) Fuel consumption (l/100 km) | 80 34 278 18 |
MANLIFT ( China Brand) | Bucket rated load: | 280kg |
Insulation bucket | Yes | |
Lower arm insulation length | 0.61m | |
Upper arm insulation length | 4.40m | |
Rotation platform | 360° continuous rotation, work bucket ±90° | |
Swing speed | 0~2 r/min | |
Wire voltage | 35KV | |
Maximum Working height | 18.5m | |
Operating range at maximum working height | 2.3 m | |
Work bucket maximum operating range | 11.3m | |
Working height at maximum working range | 8 m | |
Rated lifting weight | 454kgs | |
Lifting height by maximum lifting capacity | 18.5m | |
Lifting weight by maximum lifting height | 454kgs | |
(1) Operating system: two operating systems of work bucket and get off; full hydraulic control system; two operations of getting off and working bucket, the upper control adopts three- dimensional single-handle control, and the operation is simple and convenient. It adopts hydraulic and pneumatic control, durable and excellent insulation performance. (2) Hydraulic system: full hydraulic proportional control, stepless speed regulation (3) Safety device: interlocking of upper and lower vehicles, soft leg protection, horizontal leg full extension detection alarm , two-way balancing valve, two-way hydraulic lock, vehicle level (4) leveling system: equal volume cylinder hydrostatic leveling system | ||
Quotation USD | CIF | $ |
Maximum working height | 20.5m |
Maximum operating range | 12m |
Effective insulation length of upper arm | 4.4m |
Effective insulation length of lower wall | 0.61m |
Upper arm running Angle | -19°~+85° |
Operating Angle of lower arm | -3°~+85° |
Continuous tyre turnover | 360° |
A small crane lifts the maximum | 450kg |
Maximum load bearing of working bucket | 340kg |
The bucket rotates horizontally | ±90° |
Chassis brand/model | ISUZU/QL1160VMFRY |
The total quality | 13185kg |
Engine model | 4HKI-TC50 |
Rated power | 151kw |
The wheelbase | 4500mm |
CIF | $ |
Overall dimension: | 8310×2498×3730(mm) | ||
Total quality: | 13185(Kg) | Packing quality: | 12990(Kg) |
Packing quality: | 12990(Kg) | Front passenger: | 3 |
Approach Angle/departure Angle: | 15/15(°) | Front/rear suspension: | 1335/2475(mm) |
Axial load: | 4365/8820 | Wheel base: | 4500(mm) |
Shaft: | 2 | Maximum speed: | 105(km/h) |
Anti-lock system: | yes | Number of spring sheets: | 7/7+5 |
Tyre number: | 6 | Tyre specifications: | 10.00R20 16PR,11.00R22.5 16PR |
Before the wheel track: | 1960 | After the wheel track: | 1855 |
Functions of ISUZU Aerial Platform Truck 22m-24 :
ISUZU Aerial Platform Trucks also Name Bucket Lift Trucks, Articulated boom Lift Truck, Basket crane trucks, Truck Mounted Lift Truck. it used for maintenance of traffic Lights, Steet Lights, ladnscaping trees, cleaning setting signboard and other high aerial works.
we have Knuckled boom Aerial Platform and telescopic platform trucks for choice from 6m to 24m available.
Features of ISUZU Aerial Platform Trucks:
ISUZU Aerial Platform Trucks ensures perfect driving performance;
working cage can be made of structure or reinforced fiberglass (insulated cage);
working cage can rotate 90 degree in left and right;
4pcs outriggers and front support improve operation stability and safety;
safety devices are available, such as relief valves, balance valves, double way hydraulic locks, motor emergency system. ect.
wireless motor control system is availalbe;
Products Technical SpecificationofProducts Technical Specification of Aerial Working Trucks ISUZU FTR street lights maintenance trucks. | |||
Type | 22m arieal working truck | ||
Brand | ISUZU 4*2 | ||
Cab | With A/C, on bed | ||
Vehicle Description | |||
Overall dimensions(mm) | 10100*2500*3900 | ||
Curb weight(vehicle) (kg) | 14300 | ||
Max speed (Km/h) | 110 | ||
Engine | |||
Mode | 4HK1-TC50 | ||
Type | Diesel, 4-cylinder in line with water cooling, turbo-charging | ||
Max. power/rotated speed | 151(KW) | ||
Max. torque | 650(N.m) | ||
Displacement(ML) | 5193 | ||
Company of engine | ISUZU Motor | ||
Emission level | Euro 5 | ||
Chassis Description | |||
Wheel base | 4700 | ||
Front axle | Elliot I-beam type 6.3T | ||
Rear axle | Driving axle, 13T | ||
Number of leaf spring of suspension | 15/17 | ||
Front overhang / rear overhang | 1335/2890 | ||
Front tread / rear tread | 1960/1855 | ||
Approach angle /Departure angle | 15/17 | ||
Gear box | 6-speed with over drive | ||
Brake system | Air braking | ||
Operation control system | Power Steering | ||
Electric system | 24V | ||
Tyres | 10.00R20 | ||
Aerial wrking parameter | |||
Max. working height | 22m | ||
Max. working radius | 7.5m | ||
Loading weight of working hook | 200kg | ||
Swing angle | 360degree | ||
Swing speed | 0-2r/min | ||
Supporting legs | 4sets hydraulic supporting legs |
Pictures of ISUZU Aerial Platform Trucks for Street Lights Maintenance:
The pictures are for your reference only.Main parameter:
1. Working platform can rotary 90degree left and right. Convenient and flexible work, wide range working.
2. The working platform has the weight function and real time display. Overload alarm.
3.Five telescopic boom, four section boomssynchronous expansion, high operation efficiency, wide range working.
4.Hexagon sectionworking boom, high strength material produce, better reliability.
5.Equip DC emergency electric pump, to provide emergency protection.
6. Equip with wirelesscommunication,convenient staffscommunicationon the ground and working platform, to improve working efficiency.
7.Equipwith a large screen display on the ground and workingplatform.Real-time display the vehicle operators.
8. Equipstrobe lights, lamp
9.Electric hydraulic operation mode, high operation efficiency
10.Therotating device can be adjusted easily.
11.Rotatingplatform can be rotated 360 degree.
23mtelescopicboom truck | ||||
Outside dimension | L*W*H | mm | 8720*2350*2950 | |
weight | Passengers | person | 4 | |
Total weight | kg | 10800 | ||
Main parameter | Loading capacity of working platform | kg | 220 | |
Max. Working height | m | 23 | ||
Working radius of Max. Working height | m | 5.05 | ||
Max. Working Radius | m | 12.6 | ||
Working height of Max. Working radius | m | 5.6 | ||
Supporting landing | horizontal | mm | 4200 | |
vertical | mm | 4200 |
MainEquipment of FTR ISUZU Telescopic Boom Aerial Working Truck 23m Working Height | |
Working platform and fence | Antiskid walking board and stainless steel fence |
PTO system | Pneumatic operation |
Working platform size | 1100x700x1150 |
Boom style | Five telescopic boom, four section booms synchronous expansion |
Boom lifting style | Boom lifting up and down |
Rotation device | 360 degree Continuous rotation |
Supporting landing | H, adjusted separately |
Operation | Remote control on the working platform or on the ground, electric operation. Hydraulic operation turntable. |
Control system | Load sensitive proportional control system, stepless speed regulation. |
Leveling system | Hydraulic automatic leveling. |
Acutal pictures of FTR ISUZU Telescopic Boom Aerial Working Truck 22 - 23m Working Height
Product name | Aerial bucket truck | Options | |
Producer | DRZ | ||
Brand | Hubei Dong Runze Special Vehicle Equipment Co., Ltd | ||
Max Working Height | 20 meters | ||
Overall dimention | 7400x2610x3850(mm) | ||
Boom Type | Telescopic boom | ||
Section of Boom | 5-section | 12~32m | |
Working Raduim | 14.7 meters | ||
Platform bucket load | max 200kg, 1000x680x1200mm | ||
Chassis Brand | I.SU.ZU FTR | Dongfeng, Forland,Sinotruk,etc | |
Drive cab | Single cab, LHD, with a sleeper | ||
Engine | 190hp Euro 4 diesel engine | ||
Brake | Air brake | ||
Steering | Power steering | ||
Transmission | MT, 6 forward gears and 1 rear gear | ||
Others | Power window, central lock, A/C | ||
Wheelbase | 3900mm | ||
Tire | 9.00-20 radial tire, 6+1 | ||
Max speed | 90km/h | ||
Main Safety System | |||
Emergency pump | Included, When the engine and main pump fail, workers can be sent back to the ground | ||
Engine on/off on basket | Included | ||
Automatic interlock device | Basket and gound control lock, the two can't operation at same time | ||
Level detection function | Real-time detection of whether the vehicle is horizontal | ||
Emergency stop device | For emergency stop operation | ||
Night safety warning device | There are engineering strobes and lights on the vehicle | ||
Vehicle level status tester | Can detect the horizontal and vertical tilt of the vehicle |
Specification:
ISUZU mounted Crane truck ( 3.2Ton boom crane SQ3SK2Q) | ||
General | Vehicle Brand | DONG RUN ZETRUCKS |
Chassis Brand | I.S.U.Z.U | |
Overall Dimension | 6500 * 2100 * 3100 mm | |
GVW / Kerb Weight | 7,300kg / 4,000kg | |
Cab | Cab Capacity | 2 persons allowed |
Air Conditioner | Heating/cooling air conditioner | |
Engine | Fuel Type | Diesel |
Engine Brand | I.S.U.Z.U | |
Power | 130 HP(88 KW) 4KH1 | |
Displacement | 2999 ml | |
Emission Standard | Euro 4 or 5 | |
Chassis | Drive Type | 4X2, (Left hand drive ONLY) |
Transmission | Manual MSB 5 speed levers with 1 reverse | |
Wheelbase/No. of axle | 3360 mm / 2 | |
Tire Specification | 7.00-16 | |
Tire Number | 6 tires and 1 spare tire | |
Max Speed | 90 km/h | |
Paint | metallic paint | |
Superstructure | Cargo Box Dimension | 4000*1900*500 mm |
Crane Type | Telescpoic boom crane | |
Max Lifting Capacity | 3200 kg | |
Slewing Angle | 360° All rotation | |
Crane Weight | 1229kg | |
Installation Space | 850 mm | |
Control panel | English orYour language | |
All standard accessories: Basic tool kit, English manual... | ||
Optional | ** Knuckle boom crane. ** Hydraulic tipper box. ** Box thickness according to requirement. ** Box height could be nominated |
Items | Parameter | ||
Truck Model | 5070JSQ2 | ||
Crane Parameter | Max Lifting Capacity | 3200 kg | |
Max Lifting Moment | 6.8 T.M | ||
Recommend Power | 14 kw | ||
Max Oil Flow of Hydraulic System | 25 L/min | ||
Max Pressure of Hydraulic System | 20 Mpa | ||
Oil Tank Weight | 30 L | ||
Crane Weight | 1229 kg | ||
Installation Space | 850 mm | ||
Rotation Angle | 360° All Rotation | ||
CargoBody | Thickness | Side | 2mm |
Floor | 3mm |
Similar Key Words:hydraulic boomlifter, overhead working truck, truck mounted aerial platform, aerial beam lifter, man lift truck, articulated basket platform, skylift, insulated aerial cage truck
www.truckinchina.com
PACKING & DELIVERYAerial platform truck 16m water tank and water pump ,Truck Mounted Aerial Work Platform water tank,Work Platform water tank truck,aerial bucket truck water tank,bucket truck with water tank ,Truck Mounted water tank Aerial Work Platform
Hubei Dong Runze Special Vehicle Equipment Co., Ltd.
FAST DEPENDABLE SPECIAL TRUCKS & TRAILERS & SPARE PARTS SUPPLIER FROM China
Business range including trucks, trailers, mobile generators, machinery and auto parts, vehicle-mounted tank, automotive parts sales; Import and export business. We produce varieties of special vehicles, such as water tank truck, fuel/oil tank truck, chemical liquid tank truck, dump truck, truck mounted crane, concrete mixer truck, aerial platform truck, bulk powder tanker truck, asphalt/bitumen truck, sewage vacuum truck, septic(fecal) suction truck, garbage truck, road wrecker, fire fighting truck, refrigerator wagon, tractor, trailers, semi-trailers for oil, asphalt, bulk powder, container, LNG transportation, Low bed, tipper, skeleton semi trailer, etc., which are widely used in environment and sanitation, virescence, architecture, transportation, oil mining and many other fields.
With more than 10 years′ producing experience, we have shipped our vehicles to many countries worldwide ---- Angola, Algeria, Nigeria, Congo, Libya, Gambia, Ghana, Ethiopia, Mozambique, Tanzania, Sudan, Mali, Niger, Namibia, Jordan, Iraq, Qatar, Uzbekistan, Kazakhstan, Kyrgyzstan, Armenia, Bangladesh, Sri Lanka, North Korea, Philippines, Myanmar, Vietnam, Chile, Venezuela, Trinidad, etc.
Specialize in SHACMAN, FOTON, FAW, Dongfeng, North Benz -Beiben, ISUZU, DF Nissan-UD, HINO, JMC, JAC, SAIC Iveco, Hualing-CAMC trucks & semi-trailer customizaton business.
Business Scope: Trucks, Trailers, Mobile Generators, Environmental Protection Machinery, Auto Parts, Vehicle-Mounted Tank, Automotive Parts; Stroller, Tools, Hardware, Machinery, Electronic Products, Household Appliances, Building Materials, Arts And Crafts, Translation, Management Consulting, International Freight Forwarding, All Kinds Of Goods And Technology Import And Export Business
Customizing Whollesale manufacturers of famous brand truck, welcome to wholesale tankers, semi trailer, truck parts of good capacity at competitive price from our factory.
With more than 10 years′ producing experience, we have shipped our vehicles to many countries worldwide ----Nigeria, Congo, Ghana, Zambia, Tanzania, Sudan, Uzbekistan, Sri Lanka, Korea, Myanmar, Vietnam, Chile, Argentina, Peru etc.
Enterprise Culture
Enterprise Purpose: Establish typical example of fire civilization by science.
Enterprise Target: Create rich rewards for customers, for shareholders, and for company.
Enterprise Spirit: Unity, Preciseness, Self-improvement, Endeavour.
Enterprise Values: For society, for our country, for company, for staff.
Enterprise Concept: Quality is our dignity.
Professional Power
China′s largest supplier of the "one-stop"Special Vehicle Equipment, Commercial Vehicle Body Building Trucks & Trailers & Spare Parts Solution China′s Largest Customizer, Supplier.
Disclaimer: China Truck Manufacturers.Com is not responsible for the accuracy, authenticity, or legality of any information posted by suppliers. China Truck Manufacturers.Com will not be involved in legal disputes arising from transactions between customers and suppliers. China Truck Manufacturers.Com is a platform which connects potential buyers to potential sellers. China Truck Manufacturers.Com is not responsible for disagreements and disputes; such disagreements will be negotiated or settled at the expense of the buyer or seller. China Truck Manufacturers.Com provides platform service for buyers and sellers instead of self-operated service.
Contact Information: If your legal rights are violated, you are welcomed to send an email to our in-box. For issues arising from infringements, complaints, please contact [email protected]