Type | SX5251GJBJM364 8m³-9 m³ | SX5234GJBJS384 9m³-10 m³ | SX5254GJBJR404 10-12 m³ | SX5314GJBJS30614-16 m³ | |||
Wheelbase | 3650+1350 | 3800+1350/3750+1400 | 4325+1350/4375+1400 | 1800+3000+1350/ 1800+2975+1400 | |||
Engine type(HP) | WD615.56(260)/WD615.50(280)/WD12.336(336)/WD615.34(340)/WD615.46(360)/WD12.375(375)/WD615.38(380)/ D12.420(420) | ||||||
WEICHAI power | Diesel 4-stroke direct injection engine, 6-cylinder in-line with water cooling, turbo-charging &intercooling | ||||||
Emission standard | EURO II | ||||||
Overall Dimensions | 9130×2490×3900 | 9500×2490×3800 | 9345×2490×3774 | 10450×2490×3820 | |||
Main assembly configuration | redactor | Italy PMB6.5SP | USA SAUER TMG61.2 | Italy PMB7.1SP | Italy PMB7.1SP | Italy PMB7.8SP | Germany wepuko PM80 |
oil pump, motor | Italy PMH:P90 | USA SAUER T90P075/90M075 | Italy PMH:P90 | Italy PMH:P90 | Italy PMH:M110 | USA SAUER T90P100/90M100 | |
radiator | Changzhou, China kaipeng (18L) | Changzhou, China kaipeng (18L) | Changzhou, China kaipeng (18L) | Changzhou, China kaipeng (20L) | Changzhou, China kaipeng (24L) | China kaipeng (26L) | |
Upstructure configuration: | the material of front of the envelop δ8mm Q345 made by WISCO, mixing tank Q345 δ6mm 16 Mn wearable materials, high-alloy steel blade Q520JJ δ5mm (resistant materials), and equipped with 6mm wearable steel material, with pneumatic -pssure water supply equipment, water tank capacity 350L., traveling in10% gradient | ||||||
Concrete slump range (mm) :140-220,Feeding-in rate 3m³ /min,Discharge rate 1.1-1.4 m³ /min,Filling-up Rate 63%,Residual rate <0.3%,Sluice angle of 180 degrees horizontal | |||||||
Mixing tank geometry volume 12.69 m³(8 m³)/14.29m³(9 m³) | |||||||
Mixing tank geometry volume 15.87 m³(10 m³)/19.04m³(12 m³) | |||||||
Mixing tank geometry volume 22.22m³(14m³)/25.39m³(16 m³) | |||||||
Cltuch | φ430 Single plate, Diaphragm type | ||||||
Gearobx | 9JS119/9JS135/10JSD160/ RTD-11509C/10JSD180/RTD-11509C/10JSD180/12JS160T/12JS180T | ||||||
Steering | ZF 8098 domestic (imported Germany ZF brand is optional ) | ||||||
Fule tank capacity(L) | 380L(400L/600L is optional, add one extra 200L tank depend on the available space) | ||||||
Fram | Slotted straight beam, width 850mm /Vertical height 300 mm /thickness (8+7 mm) | ||||||
Front axle | MAN technology 7.5 ton front axle | ||||||
Middle/rear axle/ ratio | Steyr strengthened axle 13 ton(punching-welding axle housing, doubleReduction driving axle, inter-wheel differential and differential lock), Steyr strengthened axle16 ton is optional. ratio/4.8, (4.42,5.73,6.72 is optional) | ||||||
cab | MAN F2000 extra-length flat roof cabin, Four-point suspension; One sleeping bed with AC; Radio player, Safety belt, Adjustable air type; Dash boardDictograph; Sun protection on cabin, louver | ||||||
Options: two sleeping ,Electric windows, electrical heat, GPS or CD, Macrographs, car phone, electricity reversal cab | |||||||
tire | 12.00R20 (12.00-20/11.00R20/12R22.5 is optional) | ||||||
Electrics | Starter 6.2kw(24V),Generator 2.2kw(28V 80A),Battery 2×135Ah | ||||||
Brakes | Service brake with dual-circuit compssed air brake. Parking brake: Power spring brake acting on rear wheel. Auxiliary brake WEVB. (ABS+ARS are optional) |
Special Fuction Description of Cement Mixer Truck | |||||
hydraulic system | adopting equipment imported from Italy,Germany,Japan, layout of system is simple,reliable transportation. | ||||
water supply system | using pssure water supply type, simplifying structure, saving power, reducing the weight of entire vehicle. | ||||
mixing drum | adopting plow structure, double helical surface blades, using different blade in different conic part, improved the quality of concrete, tank body with small angle of inclination in installing, reducing the height of center of gravity of the entire vehicle, good driving stability, moreover, smaller angle of inclination is more favorable for dry concrete discharge, reducing residual ratio. | ||||
operation equipment | including flexible manipulator and connecting rod type manipulator, connecting rod type manipulator can realize multipoint manipulation. | ||||
feeding/discharging device | feed hopper, discharge chute can be rotated 180 degrees in the horizontal direction, so that it can adapt to different discharge position. | ||||
tank body spray-paint | tank body surface sprays two-layer polyurethane paint, using stoving varnish technology, uniform coating, strong adhesion, luster is more durable. |
Type | SX5251GJBJM364 8m³-9 m³ | SX5234GJBJS384 9m³-10 m³ | SX5254GJBJR404 10-12 m³ | SX5314GJBJS30614-16 m³ | |||
Wheelbase | 3650+1350 | 3800+1350/3750+1400 | 4325+1350/4375+1400 | 1800+3000+1350/ 1800+2975+1400 | |||
Engine type(HP) | WD615.56(260)/WD615.50(280)/WD12.336(336)/WD615.34(340)/WD615.46(360)/WD12.375(375)/WD615.38(380)/ D12.420(420) | ||||||
WEICHAI power | Diesel 4-stroke direct injection engine, 6-cylinder in-line with water cooling, turbo-charging &intercooling | ||||||
Emission standard | EURO II | ||||||
Overall Dimensions | 9130×2490×3900 | 9500×2490×3800 | 9345×2490×3774 | 10450×2490×3820 | |||
Main assembly configuration | redactor | Italy PMB6.5SP | USA SAUER TMG61.2 | Italy PMB7.1SP | Italy PMB7.1SP | Italy PMB7.8SP | Germany wepuko PM80 |
oil pump, motor | Italy PMH:P90 | USA SAUER T90P075/90M075 | Italy PMH:P90 | Italy PMH:P90 | Italy PMH:M110 | USA SAUER T90P100/90M100 | |
radiator | Changzhou, China kaipeng (18L) | Changzhou, China kaipeng (18L) | Changzhou, China kaipeng (18L) | Changzhou, China kaipeng (20L) | Changzhou, China kaipeng (24L) | China kaipeng (26L) | |
Upstructure configuration: | the material of front of the envelop δ8mm Q345 made by WISCO, mixing tank Q345 δ6mm 16 Mn wearable materials, high-alloy steel blade Q520JJ δ5mm (resistant materials), and equipped with 6mm wearable steel material, with pneumatic -pssure water supply equipment, water tank capacity 350L., traveling in10% gradient | ||||||
Concrete slump range (mm) :140-220,Feeding-in rate 3m³ /min,Discharge rate 1.1-1.4 m³ /min,Filling-up Rate 63%,Residual rate <0.3%,Sluice angle of 180 degrees horizontal | |||||||
Mixing tank geometry volume 12.69 m³(8 m³)/14.29m³(9 m³) | |||||||
Mixing tank geometry volume 15.87 m³(10 m³)/19.04m³(12 m³) | |||||||
Mixing tank geometry volume 22.22m³(14m³)/25.39m³(16 m³) | |||||||
Cltuch | φ430 Single plate, Diaphragm type | ||||||
Gearobx | 9JS119/9JS135/10JSD160/ RTD-11509C/10JSD180/RTD-11509C/10JSD180/12JS160T/12JS180T | ||||||
Steering | ZF 8098 domestic (imported Germany ZF brand is optional ) | ||||||
Fule tank capacity(L) | 380L(400L/600L is optional, add one extra 200L tank depend on the available space) | ||||||
Fram | Slotted straight beam, width 850mm /Vertical height 300 mm /thickness (8+7 mm) | ||||||
Front axle | MAN technology 7.5 ton front axle | ||||||
Middle/rear axle/ ratio | Steyr strengthened axle 13 ton(punching-welding axle housing, doubleReduction driving axle, inter-wheel differential and differential lock), Steyr strengthened axle16 ton is optional. ratio/4.8, (4.42,5.73,6.72 is optional) | ||||||
cab | MAN F2000 extra-length flat roof cabin, Four-point suspension; One sleeping bed with AC; Radio player, Safety belt, Adjustable air type; Dash boardDictograph; Sun protection on cabin, louver | ||||||
Options: two sleeping ,Electric windows, electrical heat, GPS or CD, Macrographs, car phone, electricity reversal cab | |||||||
tire | 12.00R20 (12.00-20/11.00R20/12R22.5 is optional) | ||||||
Electrics | Starter 6.2kw(24V),Generator 2.2kw(28V 80A),Battery 2×135Ah | ||||||
Brakes | Service brake with dual-circuit compssed air brake. Parking brake: Power spring brake acting on rear wheel. Auxiliary brake WEVB. (ABS+ARS are optional) |
Special Fuction Description of Cement Mixer Truck | |||||
hydraulic system | adopting equipment imported from Italy,Germany,Japan, layout of system is simple,reliable transportation. | ||||
water supply system | using pssure water supply type, simplifying structure, saving power, reducing the weight of entire vehicle. | ||||
mixing drum | adopting plow structure, double helical surface blades, using different blade in different conic part, improved the quality of concrete, tank body with small angle of inclination in installing, reducing the height of center of gravity of the entire vehicle, good driving stability, moreover, smaller angle of inclination is more favorable for dry concrete discharge, reducing residual ratio. | ||||
operation equipment | including flexible manipulator and connecting rod type manipulator, connecting rod type manipulator can realize multipoint manipulation. | ||||
feeding/discharging device | feed hopper, discharge chute can be rotated 180 degrees in the horizontal direction, so that it can adapt to different discharge position. | ||||
tank body spray-paint | tank body surface sprays two-layer polyurethane paint, using stoving varnish technology, uniform coating, strong adhesion, luster is more durable. |
Chengli Special Automobile Co., Ltd is a company with a tradition of over 10 years in the engineering industry and has aggregated a wide experience in this field. The main strategic program is focused on the production of trailers, tankers, dump trucks and other special vehicles. The company currently employs 1100 people and enjoys strong growth. Its turnover in 2007 is USD66.5 million and in 2013 it reached USD213.7 million. Chengli now ranks top 3 in special vehicle in China. The company′ S total area is 1230 acres and in 2013 its annual production ability will expand to 20, 000 units.
Chengli is customer orientated and manages its business processes with the dynamics, efficiency and reliability to reach high customer satisfaction ratings. The combination of modern technology and human oriental assures a strong and competitive position in both domestic and international market.
Chengli has set up 127 service centers throughout China to provide ready-service for its customers. Complete coverage of sales service greatly reduces the distance between Chengli and its customers. Anytime customers want, Chengli will be there with them.
Working with reliable local partners, Chengli now is a key player in North Africa (Algeria, Libya, and Egypt), East Africa (Tanzania, Kenya, Uganda and Malawi)West Africa (Nigeria, Ghana, and Senegal), Middle East (U. A. E, Saudi Arabia and Qatar) and South East Asia., and Senegal), Middle East (U. A. E, Saudi Arabia and Qatar) and South East Asia.
Our company is located in Suizhou City, Hubei Province, center of China, the special-purpose vehicle city of China. We welcome friends from all over the world to visit us!
Disclaimer: China Truck Manufacturers.Com is not responsible for the accuracy, authenticity, or legality of any information posted by suppliers. China Truck Manufacturers.Com will not be involved in legal disputes arising from transactions between customers and suppliers. China Truck Manufacturers.Com is a platform which connects potential buyers to potential sellers. China Truck Manufacturers.Com is not responsible for disagreements and disputes; such disagreements will be negotiated or settled at the expense of the buyer or seller. China Truck Manufacturers.Com provides platform service for buyers and sellers instead of self-operated service.
Contact Information: If your legal rights are violated, you are welcomed to send an email to our in-box. For issues arising from infringements, complaints, please contact [email protected]