| Howo Synchronous Chip Sealer Sealer | |||
| Model Name | HOWO Synchronous Chip Sealer | ||
| Driving Type | 6×4,leftt hand drive | ||
| Weights | |||
| GVW(kg) | 45000 | ||
| Payload weight(kg) | 28400 | ||
| Curb weight(kg) | 17600 | ||
| Dimensions | |||
| Wheelbase(mm) | 4600+1500 | ||
| Overall Dimension(mm) | 10200×2500×3563 | ||
| Front /Rear tread (mm) | 2022,1830/1830 | ||
| Front/rear overhang(mm) | 1500/2750 | ||
| Approach/Depature angle(°) | 16/14 | ||
| Engine | |||
| Engine model | WD615.69 | ||
| Engine type | 6 cylinder in line, water-cooled ,Intercooling engine | ||
| Engine Power | 247kw(336hp) | ||
| Displacement(L) | 9.726L | ||
| Drive Line | |||
| Cluth description | Dry single plate, hydraulic control booster,mechnical operation | ||
| Transmission | HW15710.(10 forwarder,2 reverse gear,Manual operation) | ||
| Steering system | ZF8098 | ||
| Axles | |||
| Rear Axle(drive axle) | 13tons*2 | ||
| Front Axle-Model | 7tons | ||
| Tire specification | |||
| Tire specification | 12.00R20 14PR,10+1 | ||
| Bitumen sraying | |||
| Bitumen tank | Material: | 4mm steel plate.60mm insulation layer,stainless steel outside .it can pvent the heating losing | |
| Tanker volume | 8m3 | ||
| 1 unit box on each side,with lock | |||
| Bitumen pump | Model | QGB950 | |
| Flow | 950 l/min | ||
| Rated speed | 584 r/min | ||
| Resolve pssure | 0.8 Mpa | ||
| Heating heater | Brand : | Riello G20(Italy Original) | |
| Efficiency | 2*10^4 kcal/h | ||
| Bitumen | Sorts can by sprayed | Hot bitumen, hot modified bitumen, diluted bitumen, emulsified bitumen, specified rubber modified bitumen | |
| Bitumen distribution | Spraying arm | Floding mode spray arm , | |
| Distribution width | 4m | ||
| Aggregate spraying | |||
| Aggregate cabin | Volume | 12m3 | |
| Aggregate | Specified diameter | S3 ~S24 mm | |
| Spraying | Width | 4m | |
| Currency | ±2% | ||
| Hydrualic system and control system | |||
| Hydrualic pump | Model | Parker GPC4-50-25-20/20 (USA brand) | |
| Control system | Model | Siemens CLW-32-01 | |
| Howo Synchronous Chip Sealer Sealer | |||
| Model Name | HOWO Synchronous Chip Sealer | ||
| Driving Type | 6×4,leftt hand drive | ||
| Weights | |||
| GVW(kg) | 45000 | ||
| Payload weight(kg) | 28400 | ||
| Curb weight(kg) | 17600 | ||
| Dimensions | |||
| Wheelbase(mm) | 4600+1500 | ||
| Overall Dimension(mm) | 10200×2500×3563 | ||
| Front /Rear tread (mm) | 2022,1830/1830 | ||
| Front/rear overhang(mm) | 1500/2750 | ||
| Approach/Depature angle(°) | 16/14 | ||
| Engine | |||
| Engine model | WD615.69 | ||
| Engine type | 6 cylinder in line, water-cooled ,Intercooling engine | ||
| Engine Power | 247kw(336hp) | ||
| Displacement(L) | 9.726L | ||
| Drive Line | |||
| Cluth description | Dry single plate, hydraulic control booster,mechnical operation | ||
| Transmission | HW15710.(10 forwarder,2 reverse gear,Manual operation) | ||
| Steering system | ZF8098 | ||
| Axles | |||
| Rear Axle(drive axle) | 13tons*2 | ||
| Front Axle-Model | 7tons | ||
| Tire specification | |||
| Tire specification | 12.00R20 14PR,10+1 | ||
| Bitumen sraying | |||
| Bitumen tank | Material: | 4mm steel plate.60mm insulation layer,stainless steel outside .it can pvent the heating losing | |
| Tanker volume | 8m3 | ||
| 1 unit box on each side,with lock | |||
| Bitumen pump | Model | QGB950 | |
| Flow | 950 l/min | ||
| Rated speed | 584 r/min | ||
| Resolve pssure | 0.8 Mpa | ||
| Heating heater | Brand : | Riello G20(Italy Original) | |
| Efficiency | 2*10^4 kcal/h | ||
| Bitumen | Sorts can by sprayed | Hot bitumen, hot modified bitumen, diluted bitumen, emulsified bitumen, specified rubber modified bitumen | |
| Bitumen distribution | Spraying arm | Floding mode spray arm , | |
| Distribution width | 4m | ||
| Aggregate spraying | |||
| Aggregate cabin | Volume | 12m3 | |
| Aggregate | Specified diameter | S3 ~S24 mm | |
| Spraying | Width | 4m | |
| Currency | ±2% | ||
| Hydrualic system and control system | |||
| Hydrualic pump | Model | Parker GPC4-50-25-20/20 (USA brand) | |
| Control system | Model | Siemens CLW-32-01 | |
Our company ChengLi Special Automobile Co., Ltd, which is appointed by the Ministry of Industry and Information Technology of China, is a big manufacturer producing all kinds of special trucks. Factory is located in South Suburb ChengLi Automobile Industry Park, Suizhou City, Hubei Province, China. Its total assets exceeds US$300 million, Cover an area of 2000, 000 square meter and it has a staff of more than 9000.
ChengLi Special Automobile Co., Ltd, is famous for special truck for virescence, environment clearness, oil, chemical industry and pressure vessel...It has trademark"CHENGLIWEI"and products code: CLW.
Our company cooperates with famous chassis manufacturers, such as DONGFENG, SINOTRUK, ISUZU, FOTON, JAC, JMC, Iveco HONGYAN, FAW, BEIBEN and etc.
Our company has in-dependable export qualification, and has a mount of clients overseas. Our company has solid technology, flawless inspection, advanced equipments, reliant quality and flexible modes of operation. What′s more, We obtained ISO9001 and, CCC certification (China Compulsory Certification), certification and other certifications that exported need.
Disclaimer: China Truck Manufacturers.Com is not responsible for the accuracy, authenticity, or legality of any information posted by suppliers. China Truck Manufacturers.Com will not be involved in legal disputes arising from transactions between customers and suppliers. China Truck Manufacturers.Com is a platform which connects potential buyers to potential sellers. China Truck Manufacturers.Com is not responsible for disagreements and disputes; such disagreements will be negotiated or settled at the expense of the buyer or seller. China Truck Manufacturers.Com provides platform service for buyers and sellers instead of self-operated service.
Contact Information: If your legal rights are violated, you are welcomed to send an email to our in-box. For issues arising from infringements, complaints, please contact [email protected]
