Chassis Parameter | |||
Chassis Model: | ZZ1257 | ||
Overall Dimension: (mm) | 10300x2496x3600 | ||
Fuel Type: | Diesel | ||
Drive Type: | 6*4, Left Hand Driving | ||
Spring Leaf Quantity: | 10/12 | ||
Tyre Size: | Rims: 8.5-20,10 hole-steel ,12.00R20 | ||
Tyre Quantity: | 6, (front 2, rear 4) | ||
Total Mass:(kg) | 25000 | ||
Curb Mass:(kg) | 11330 | ||
F/R Axle Load(kg): | 7000/18000 | ||
Front/Rear Suspension: (mm) | 1500/2540 | ||
Front/Rear wheel track:(mm) | 2022/1830 | ||
Approach/Departure(°): | 16/12° | ||
Max Speed(km/h): | 102 | ||
Wheel base(mm): | 4600+1350 | ||
Maximum driving speed | 90 km/h | ||
Maximum gradeability | 0.32 | ||
Minimum turning circle | 24m | ||
Driver's Cab | 2+4,Special 4doors cab,all steel forward control, 70° hydraulically tiltable to the front,2-arm windscreen wiper system with 3speeds, laminate windscreen, with casted-in radio aerial, hydraulically damped adjustable driver's seat and rigid adjustable co-driver's seat, heating &ventilation system, with stereo radio/cassette recorder, sun visor, and adjustable steering wheel, air horn, air conditioner, safety belt. | ||
Electrics | Operating voltage: 24V, negative grounded Starter: 24V 5.4 Kw Alternator:28 V,1540 W Batteries: 2x 12V 165 Ah Cigar-lighter, horn, headlamps, fog lights, brake lights, indicators and reverse light | ||
Clutch | Single-plate dry diaphragm-spring clutch, diameter 430 mm, hydraulically operating with air assistance | ||
Transmission | RT11509C | ||
Propeller Shaft | Double universal joint propeller shaft with gear-shaped coupling flange | ||
Front Axle | Steering with double T-cross section beam | ||
Rear Axles | MCY13Q, MAN axle, 2*13000kg | ||
Instrument Panel | Active check control with indicators, with this instrument the daily manual checks on the vehicle and combined indicators of compssed air pssure, coolant temperature, engine oil pssure and battery charging | ||
Engine | |||
Engine Model: | WD615.87 Euro II,6-cylinder in-line with water cooling, turbo-charging and intercooling 4-stroke direct injection diesel engine,Thermostat with 71ºC opening begin,WABCO double cylinder air compssor,Rigid fan | ||
Power: | 290 hp (213Kw) at 2200 rpm | Number of cylinder: | 6 |
Toque: | 1350 Nm at 1300-1600 rpm | Bore | 126 mm |
Displacement: | 9726ml | Stroke | 130 mm |
Compssion ratio | 17:01 | Specific fuel consumption | 195g/kWh |
Engine oil filling quantity | 23L | ||
Cooling system filling quantity (long-term filling) | 40 L | ||
Watering system Performance | |||
Water tanker: 10000L Foam tanker:2000L Normal pssure pump: CB10/60 Flow Pressure: 60L/S/1.0Mpa PL48 Fire Pump Flow: 48L/S Pressure: 0.6-1.6MPa Fire distance (water): ≥60m Fire distance (foam): ≥55m Accessories as attachment required | |||
Equipment List | |||
Name | UNIT | QUANTITY | |
1.water suction hose, 4m | piece | 2 | |
2.water filter | piece | 1 | |
3.dividing breeching | piece | 1 | |
4.Fire belt 13#, 80 | piece | 6 | |
5.Fire belt 13#, 65 | piece | 4 | |
6.Siamese | piece | 4 | |
7.Waist ax | piece | 2 | |
8.Hose bandage | piece | 1 | |
9.Hose bridge | piece | 1 | |
10.Hose hook | piece | 1 | |
11.Fire hydrant wrench on the ground | piece | 1 | |
12.Fire hydrant wrench underground | piece | 1 | |
13.Suction pipe wrench | piece | 1 | |
14.Dry powder fire extinguisher, 3KG | piece | 1 | |
15.Fire bucket | piece | 1 | |
16.nozzle | piece | 1 | |
17.Multifunctional water gun | piece | 1 | |
18.Fire axe | piece | 1 | |
19.Fire spade | piece | 1 | |
20.Iron collar | piece | 1 | |
21.Fire picks | piece | 1 | |
22.adapter | piece | 1 | |
23.The accessory tools | set | 1 |
Chassis Parameter | |||
Chassis Model: | ZZ1257 | ||
Overall Dimension: (mm) | 10300x2496x3600 | ||
Fuel Type: | Diesel | ||
Drive Type: | 6*4, Left Hand Driving | ||
Spring Leaf Quantity: | 10/12 | ||
Tyre Size: | Rims: 8.5-20,10 hole-steel ,12.00R20 | ||
Tyre Quantity: | 6, (front 2, rear 4) | ||
Total Mass:(kg) | 25000 | ||
Curb Mass:(kg) | 11330 | ||
F/R Axle Load(kg): | 7000/18000 | ||
Front/Rear Suspension: (mm) | 1500/2540 | ||
Front/Rear wheel track:(mm) | 2022/1830 | ||
Approach/Departure(°): | 16/12° | ||
Max Speed(km/h): | 102 | ||
Wheel base(mm): | 4600+1350 | ||
Maximum driving speed | 90 km/h | ||
Maximum gradeability | 0.32 | ||
Minimum turning circle | 24m | ||
Driver's Cab | 2+4,Special 4doors cab,all steel forward control, 70° hydraulically tiltable to the front,2-arm windscreen wiper system with 3speeds, laminate windscreen, with casted-in radio aerial, hydraulically damped adjustable driver's seat and rigid adjustable co-driver's seat, heating &ventilation system, with stereo radio/cassette recorder, sun visor, and adjustable steering wheel, air horn, air conditioner, safety belt. | ||
Electrics | Operating voltage: 24V, negative grounded Starter: 24V 5.4 Kw Alternator:28 V,1540 W Batteries: 2x 12V 165 Ah Cigar-lighter, horn, headlamps, fog lights, brake lights, indicators and reverse light | ||
Clutch | Single-plate dry diaphragm-spring clutch, diameter 430 mm, hydraulically operating with air assistance | ||
Transmission | RT11509C | ||
Propeller Shaft | Double universal joint propeller shaft with gear-shaped coupling flange | ||
Front Axle | Steering with double T-cross section beam | ||
Rear Axles | MCY13Q, MAN axle, 2*13000kg | ||
Instrument Panel | Active check control with indicators, with this instrument the daily manual checks on the vehicle and combined indicators of compssed air pssure, coolant temperature, engine oil pssure and battery charging | ||
Engine | |||
Engine Model: | WD615.87 Euro II,6-cylinder in-line with water cooling, turbo-charging and intercooling 4-stroke direct injection diesel engine,Thermostat with 71ºC opening begin,WABCO double cylinder air compssor,Rigid fan | ||
Power: | 290 hp (213Kw) at 2200 rpm | Number of cylinder: | 6 |
Toque: | 1350 Nm at 1300-1600 rpm | Bore | 126 mm |
Displacement: | 9726ml | Stroke | 130 mm |
Compssion ratio | 17:01 | Specific fuel consumption | 195g/kWh |
Engine oil filling quantity | 23L | ||
Cooling system filling quantity (long-term filling) | 40 L | ||
Watering system Performance | |||
Water tanker: 10000L Foam tanker:2000L Normal pssure pump: CB10/60 Flow Pressure: 60L/S/1.0Mpa PL48 Fire Pump Flow: 48L/S Pressure: 0.6-1.6MPa Fire distance (water): ≥60m Fire distance (foam): ≥55m Accessories as attachment required | |||
Equipment List | |||
Name | UNIT | QUANTITY | |
1.water suction hose, 4m | piece | 2 | |
2.water filter | piece | 1 | |
3.dividing breeching | piece | 1 | |
4.Fire belt 13#, 80 | piece | 6 | |
5.Fire belt 13#, 65 | piece | 4 | |
6.Siamese | piece | 4 | |
7.Waist ax | piece | 2 | |
8.Hose bandage | piece | 1 | |
9.Hose bridge | piece | 1 | |
10.Hose hook | piece | 1 | |
11.Fire hydrant wrench on the ground | piece | 1 | |
12.Fire hydrant wrench underground | piece | 1 | |
13.Suction pipe wrench | piece | 1 | |
14.Dry powder fire extinguisher, 3KG | piece | 1 | |
15.Fire bucket | piece | 1 | |
16.nozzle | piece | 1 | |
17.Multifunctional water gun | piece | 1 | |
18.Fire axe | piece | 1 | |
19.Fire spade | piece | 1 | |
20.Iron collar | piece | 1 | |
21.Fire picks | piece | 1 | |
22.adapter | piece | 1 | |
23.The accessory tools | set | 1 |
HUBEI VELDLION MACHINERY Co., Ltd, is a high-tech enterprise approved by the Chinese government, specializing in the production of a variety of special-purpose vehicles. Our company possess legal import and export license and occupy large scales of foreign markets. The main productions of our company include more than 100 types of trucks, such as: Sprinkler Truck, Fecal suction truck, Garbage truck, Refuse compactor, Sewage suction truck, Fuel tank, High-altitude operation truck, Truck with crane, Dump truck, Instructional truck, Van truck, Semi-trailer, Fire engine, Spares, Refrigerator truck, Water wagon, Tractor, High-altitude water truck, Bulk cement truck, Chemical liquid truck, Concrete mixer truck, ect.
Our company VELDLION has strong technical force, professional QC process, advanced production equipment, stable product quality, and flexible operation modes. What′s more, Production lines has roundly passed the ISO9001-2000 quality management system certification and the 3C(China Compulsory Certification).
Good quality and business reputation is guarantee of our success. We will do as we can that treating customers honestly, managing flexibly, guaranteeing high quality but low price, and keeping high efficiency.
We promise that all our products, will enjoy one year quality guarantee (for repair, replacement or compensation of faulty products) and free technical services lifetime.
Look forward to cooperate with you! Let′s join hands and create a better tomorrow!
Disclaimer: China Truck Manufacturers.Com is not responsible for the accuracy, authenticity, or legality of any information posted by suppliers. China Truck Manufacturers.Com will not be involved in legal disputes arising from transactions between customers and suppliers. China Truck Manufacturers.Com is a platform which connects potential buyers to potential sellers. China Truck Manufacturers.Com is not responsible for disagreements and disputes; such disagreements will be negotiated or settled at the expense of the buyer or seller. China Truck Manufacturers.Com provides platform service for buyers and sellers instead of self-operated service.
Contact Information: If your legal rights are violated, you are welcomed to send an email to our in-box. For issues arising from infringements, complaints, please contact [email protected]