A new generation highway Towing Truck with low dead load; the elegant shaping and the luxury decorations give you the comfort driving experiences, making it a perfect choice for the highway long-range standard-load transportations and medium-short range transportation tasks, especially available as a container carrier.

Model									HFC4180KR1K3
Drive mode									4*2
Main technical parameters	Size Parameter	Overall dimension(L×W×H) (mm)							6095×2495×3150
		Wheelbase(mm)							3500
		(/)Front Tread/Rear Tread (mm)							2040/1860
		(/)FF/AF(mm)							1495/1100
		CH(mm)							1240/1480(12.00R20)
		frame front/rear Width (mm)							940/840
		frame Section Size (Hf*Wf*Hf)(mm)							280×90×(8+5)
	Quality Parameters	GVW/GCW(Kg)							40000
		/GVW/GCW of Front axle/Rear axle(Kg)							4980/14520
		Chassis weight(Kg)							7480
		/ Chassis weight of Front axle/Rear axle(Kg)							4700/2780
	Performance Parameters	Max speed(Km/h)							110
		Maximum Gradeability(%)							20
		Radius of turning (m)							≤10
		() Radius of gyration(only for tractor)(/) (mm)							1810/1500
	Main configuration	Cab		Type					N944 N944
				Seat					Air seat
				Engine guard					standard
				AC					standard
				Heater					standard
				Electric glass					standard
				CD					optional
				MP3					standard
				Cabin suspension					2 springs in front and 2 air bags in rear
				Electronic control flip					optional
				Copilot visor					standard
		Engine		Model					WP12.380E32
				Emission levels					E-III
				/ Max output power(hp/rpm)					380/2200
				/ Max torque(N·m/rpm)					1500/1300-1600
				Displacement (cc)					11596
				Oil pump					Domestic
									standard
		Clutch		Mode					,,,Single, dry plate, screw spring,VALEO
				Specification					Φ430
		Transmission		Mode					12JSD160TA
				Gear position					R2/R1 7/1 9/3 11/5 8/2 10/4 12/6
				Gear ratio		I			12.1
						II			9.41
						III			7.31
						IV			5.71
						V			4.46
						VI			3.48
						VII			2.71
						VIII			2.11
						IX			1.64
						X			1.28
						XI			1
						XII			0.78
						RL			11.56
						RH			2.59
				PTO					optional QH50
		Front axle		Modle					" I"style break face
				Maximum capacity(Kg)					6500
		Rear axle		Mode					Steyr Technology
				Ratio					4.8
				Maximum capacity (Kg)					13000
		driveshaft		Specification					Φ120×6
		Steering		Type					ZF Power steering with ZF steering gear
		Oil		Fuel tank material					Iron Aluminum alloy
				Fuel tank capacity (L)					400
		Brake		Type					Dual-circuit air brake
				/(mm) Drum Specification front/rear					Φ410*156/Φ420*185
Exhaust assisted braking					standard
ABS					/
Inter-wheel differential lock					standard
Tire		Model					12.00R20,12R22.5,315/80R22.5
(/)Suspension		Type					parapolic leaf spring 10/11+9
		Parapolic leaf spring size					1800×90/1700×90
		Front axle stabilizer bar					standard
		Rear axle stabilizer bar					optional
Retractor		Brand					Domestic/JOST
		Saddle load capacity (kg)					20000/30000
		Tractor pin diameter (mm)					50/90
Electrical System		Batteries					12 volt-140Ah×2
		Alternator					28 volt / 70 amp
		Starter					24 volt / 5.5 kW

Basic Info Model NO. HFC4180KR1K3 Horsepower 351-450hp Engine Capacity ＞8L Tire Certification ECE, GCC, ISO, DOT Tire Design Radial Condition New Loading Capacity 50t Trademark JAC Specification 30T Origin China HS Code 870120000 Product Description Customer Question & Answer Ask something for more details (0) A new generation highway Towing Truck with low dead load; the elegant shaping and the luxury decorations give you the comfort driving experiences, making it a perfect choice for the highway long-range standard-load transportations and medium-short range transportation tasks, especially available as a container carrier.

Model									HFC4180KR1K3
Drive mode									4*2
Main technical parameters	Size Parameter	Overall dimension(L×W×H) (mm)							6095×2495×3150
		Wheelbase(mm)							3500
		(/)Front Tread/Rear Tread (mm)							2040/1860
		(/)FF/AF(mm)							1495/1100
		CH(mm)							1240/1480(12.00R20)
		frame front/rear Width (mm)							940/840
		frame Section Size (Hf*Wf*Hf)(mm)							280×90×(8+5)
	Quality Parameters	GVW/GCW(Kg)							40000
		/GVW/GCW of Front axle/Rear axle(Kg)							4980/14520
		Chassis weight(Kg)							7480
		/ Chassis weight of Front axle/Rear axle(Kg)							4700/2780
	Performance Parameters	Max speed(Km/h)							110
		Maximum Gradeability(%)							20
		Radius of turning (m)							≤10
		() Radius of gyration(only for tractor)(/) (mm)							1810/1500
	Main configuration	Cab		Type					N944 N944
				Seat					Air seat
				Engine guard					standard
				AC					standard
				Heater					standard
				Electric glass					standard
				CD					optional
				MP3					standard
				Cabin suspension					2 springs in front and 2 air bags in rear
				Electronic control flip					optional
				Copilot visor					standard
		Engine		Model					WP12.380E32
				Emission levels					E-III
				/ Max output power(hp/rpm)					380/2200
				/ Max torque(N·m/rpm)					1500/1300-1600
				Displacement (cc)					11596
				Oil pump					Domestic
									standard
		Clutch		Mode					,,,Single, dry plate, screw spring,VALEO
				Specification					Φ430
		Transmission		Mode					12JSD160TA
				Gear position					R2/R1 7/1 9/3 11/5 8/2 10/4 12/6
				Gear ratio		I			12.1
						II			9.41
						III			7.31
						IV			5.71
						V			4.46
						VI			3.48
						VII			2.71
						VIII			2.11
						IX			1.64
						X			1.28
						XI			1
						XII			0.78
						RL			11.56
						RH			2.59
				PTO					optional QH50
		Front axle		Modle					" I"style break face
				Maximum capacity(Kg)					6500
		Rear axle		Mode					Steyr Technology
				Ratio					4.8
				Maximum capacity (Kg)					13000
		driveshaft		Specification					Φ120×6
		Steering		Type					ZF Power steering with ZF steering gear
		Oil		Fuel tank material					Iron Aluminum alloy
				Fuel tank capacity (L)					400
		Brake		Type					Dual-circuit air brake
				/(mm) Drum Specification front/rear					Φ410*156/Φ420*185
Exhaust assisted braking					standard
ABS					/
Inter-wheel differential lock					standard
Tire		Model					12.00R20,12R22.5,315/80R22.5
(/)Suspension		Type					parapolic leaf spring 10/11+9
		Parapolic leaf spring size					1800×90/1700×90
		Front axle stabilizer bar					standard
		Rear axle stabilizer bar					optional
Retractor		Brand					Domestic/JOST
		Saddle load capacity (kg)					20000/30000
		Tractor pin diameter (mm)					50/90
Electrical System		Batteries					12 volt-140Ah×2
		Alternator					28 volt / 70 amp
		Starter					24 volt / 5.5 kW

Shanghai Wanjin CNHTC Sinotruck Sales Co., Ltd., is the only joint-stock enterprise which was built by China National Heavy Duty Truck Group Co., Ltd who also has its own shares. This company is built through strict market survey to meet the needs of exporting to oversea markets through Shanghai Port.

Major Function: Specially selling HOWO, STEYR, STEYR KING, HUANGHE PRINCE series heavy duty trucks. Now our company has the ability of selling completed trucks, technical service, the supply of the spare parts, staff training, quality information feedback, truck insurance and so on. We really offer omnibearing services to customers.

Shanghai is the economic and the global shipping center. As a company located in Shanghai, our company naturally became the window of CNHTC selling its products to overseas markets.

Human Resources: The staffs of the company always are active in the filed of heavy duty truck′s sale and service. As a professional group engaged in the heavy duty truck of domestic, international marketing, they master its information from international and domestic. The staffs are familiar with the traffic regulations and the service technology in STEYR heavy duty trucks. They can provide buying truck information, corrective maintenance guidance, driver and repairman training and the skills of purchasing good spare parts for the customers.

Hardware Facilities: Our company is located in No. 1459 Shuichan Road, Baoshan District, Shanghai( opposite to North Logistics Company). The geographical position is superior, the traffic is convenient. It covers 10 mus. The office building covers more than 1000 square meters, the indoor whole sealing maintenance workshop contains 1500 square meters, 300 square meters of spare parts storehouse. It also sets up the training room, customer rest room, washing truck yard, and so on. We have just purchased a set of frame correction instrument, the maintenance tool and equipments especially used in heavy duty truck