| SINOTRUK HOWO 6X6 371HP SINGLE TIRE LORRY CARGO TRUCK | |||
| Model | ZZ1257N4647 | ||
| Engine | Make: SINOTRUK | ||
| Diesel 4-stroke direct injection diesel engine | |||
| Engine model: WD615.47, Euro II emission standard | |||
| 6-cylinder in-line with water cooling, turbo-charging and intercooling | |||
| Maximum output: 371 hp (273 Kw) at 2200 rpm | |||
| Maximum torque: 1460 Nm at 1300-1600 rpm | |||
| Number of cylinder: 6 | |||
| Displacement: 9.726 L | |||
| Specific fuel consumption: 195 g/kWh | |||
| Engine oil filling quantity: 19 l | |||
| Cooling system filling quantity (long-term filling): 40 l | |||
| Thermostat with 71ºCopening begin | |||
| Twin cylinder air compssor | |||
| Rigid fan | |||
| Transmission | HW19710, 10 forwards and 2 reverse | ||
| Ratio: 14.28 10.62 7.87 5.87 4.375 3.26 2.43 1.8 1.34 1 13.91(R1) 3(R2) | |||
| Propeller Shaft | Double universal joint propeller shaft with gear-shaped coupling flange | ||
| Front Axle | Steer front steering drive axle with planetary wheel reduction | ||
| Rear Axle | Steel front steering driving axle, central single reduction with hub reduction and with differential locks between wheels and axles . | ||
| Ratio:5.73 | |||
| Chassis | frame: U-profile parallel ladder frame and reinforced subframe all cold riveted cross members | ||
| Aluminium fuel tank: 400 L capacity with locking fuel cap, fitted to the off side of the chassis | |||
| Steering | ZF power steering, modol ZF8118, hydraulic steering with power assitance | ||
| Transfer Case | Model: ZQC 2000 | ||
| High-grade/low grade ratio: 0.89/1.536 | |||
| Brakes | Service brake: dual circuit compssed air brake | ||
| Parking brake (emergency brake): spring energy, compssed air operating on front shaft and rear wheels | |||
| Wheels & Tyres | Tire: 14.00R20, totally 6+1 tyres | ||
| Option: | |||
| Driver's Cab | HW76, HOWO Long Cab, with two seats, one bed, 2-arm windscreen wiper system with three speeds, | ||
| damped adjustable driver's seat, with heating and ventilating system, exterior sun visor, safety belts, adjustable steering wheel, air horn, | |||
| air conditioner , with transverse stabilizer,with 4-point support fully floating suspension + shock absorber | |||
| Electrics | Operating voltage: 24 V, negative grounded | ||
| Starter: 24 V, 5.4 Kw | |||
| Alternator: 3-phase, 28 V, 1500 W | |||
| Batteries: 2 x 12 V, 165 Ah | |||
| Cigar-lighter, horn, headlamps, fog lights, brake lights, indicators and reverse light | |||
| Instrument Panel | Active check central controllor with indicators, with this integral instrument the daily manual checks on the vehicle and combined indicators | ||
| of compssed air pssure, coolant temperature, engine oil pssure and battery charging | |||
| Dimensions mm | Wheel base | 4600+1400 | |
| Front wheel track | 2072 | ||
| Rear wheel track | 1830 | ||
| Front overhang | 1578 | ||
| Rear overhang | 2490 | ||
| Approach angle (0) | 31.8 | ||
| Departure angle (0) | 17.4 | ||
| Overall dimension(L*W*H) | 10068×2496×3146 | ||
| Weight kg | Dead weight | 9660 | |
| Gross vehicle weight | 33000 | ||
| Front axle loading capacity | 7000 | ||
| Rear axle loading capacity | 2*16000 | ||
| Performance | Maximum driving speed (km/h) | 76 | |
| Maximum gradeability (%) | 48 | ||
| Min. turning radius(m) | 12 | ||
| Minimum ground clearance (mm) | 314 | ||
| Fuel consumption (l/100 km) | 40 | ||
| The manufacturer reserves the right of technical alteration/change for better improvement without prior notice! | |||
Packaging Details: | nude |
| Delivery Detail: | 20-30 days after receive your 30% deposit |
Pre-Sale Service:
1.After the completion of production, we will carry out lower protection, side protection, ABS
braking, anti-lock test and other items for the finished products
2.We will check again before delivery or Shipping.
3.we must guarantee our trucks or trailers perfect and pictures will taken and sent to outr customers.
After-Sales Service:
1. Traning of trailer operating and normal maintenance .
2.The goods are supplied with vulnerable parts
3. Solve the customer's advisory.
4. CKD and SKD are available.
| SINOTRUK HOWO 6X6 371HP SINGLE TIRE LORRY CARGO TRUCK | |||
| Model | ZZ1257N4647 | ||
| Engine | Make: SINOTRUK | ||
| Diesel 4-stroke direct injection diesel engine | |||
| Engine model: WD615.47, Euro II emission standard | |||
| 6-cylinder in-line with water cooling, turbo-charging and intercooling | |||
| Maximum output: 371 hp (273 Kw) at 2200 rpm | |||
| Maximum torque: 1460 Nm at 1300-1600 rpm | |||
| Number of cylinder: 6 | |||
| Displacement: 9.726 L | |||
| Specific fuel consumption: 195 g/kWh | |||
| Engine oil filling quantity: 19 l | |||
| Cooling system filling quantity (long-term filling): 40 l | |||
| Thermostat with 71ºCopening begin | |||
| Twin cylinder air compssor | |||
| Rigid fan | |||
| Transmission | HW19710, 10 forwards and 2 reverse | ||
| Ratio: 14.28 10.62 7.87 5.87 4.375 3.26 2.43 1.8 1.34 1 13.91(R1) 3(R2) | |||
| Propeller Shaft | Double universal joint propeller shaft with gear-shaped coupling flange | ||
| Front Axle | Steer front steering drive axle with planetary wheel reduction | ||
| Rear Axle | Steel front steering driving axle, central single reduction with hub reduction and with differential locks between wheels and axles . | ||
| Ratio:5.73 | |||
| Chassis | frame: U-profile parallel ladder frame and reinforced subframe all cold riveted cross members | ||
| Aluminium fuel tank: 400 L capacity with locking fuel cap, fitted to the off side of the chassis | |||
| Steering | ZF power steering, modol ZF8118, hydraulic steering with power assitance | ||
| Transfer Case | Model: ZQC 2000 | ||
| High-grade/low grade ratio: 0.89/1.536 | |||
| Brakes | Service brake: dual circuit compssed air brake | ||
| Parking brake (emergency brake): spring energy, compssed air operating on front shaft and rear wheels | |||
| Wheels & Tyres | Tire: 14.00R20, totally 6+1 tyres | ||
| Option: | |||
| Driver's Cab | HW76, HOWO Long Cab, with two seats, one bed, 2-arm windscreen wiper system with three speeds, | ||
| damped adjustable driver's seat, with heating and ventilating system, exterior sun visor, safety belts, adjustable steering wheel, air horn, | |||
| air conditioner , with transverse stabilizer,with 4-point support fully floating suspension + shock absorber | |||
| Electrics | Operating voltage: 24 V, negative grounded | ||
| Starter: 24 V, 5.4 Kw | |||
| Alternator: 3-phase, 28 V, 1500 W | |||
| Batteries: 2 x 12 V, 165 Ah | |||
| Cigar-lighter, horn, headlamps, fog lights, brake lights, indicators and reverse light | |||
| Instrument Panel | Active check central controllor with indicators, with this integral instrument the daily manual checks on the vehicle and combined indicators | ||
| of compssed air pssure, coolant temperature, engine oil pssure and battery charging | |||
| Dimensions mm | Wheel base | 4600+1400 | |
| Front wheel track | 2072 | ||
| Rear wheel track | 1830 | ||
| Front overhang | 1578 | ||
| Rear overhang | 2490 | ||
| Approach angle (0) | 31.8 | ||
| Departure angle (0) | 17.4 | ||
| Overall dimension(L*W*H) | 10068×2496×3146 | ||
| Weight kg | Dead weight | 9660 | |
| Gross vehicle weight | 33000 | ||
| Front axle loading capacity | 7000 | ||
| Rear axle loading capacity | 2*16000 | ||
| Performance | Maximum driving speed (km/h) | 76 | |
| Maximum gradeability (%) | 48 | ||
| Min. turning radius(m) | 12 | ||
| Minimum ground clearance (mm) | 314 | ||
| Fuel consumption (l/100 km) | 40 | ||
| The manufacturer reserves the right of technical alteration/change for better improvement without prior notice! | |||
Packaging Details: | nude |
| Delivery Detail: | 20-30 days after receive your 30% deposit |
Pre-Sale Service:
1.After the completion of production, we will carry out lower protection, side protection, ABS
braking, anti-lock test and other items for the finished products
2.We will check again before delivery or Shipping.
3.we must guarantee our trucks or trailers perfect and pictures will taken and sent to outr customers.
After-Sales Service:
1. Traning of trailer operating and normal maintenance .
2.The goods are supplied with vulnerable parts
3. Solve the customer's advisory.
4. CKD and SKD are available.
Shanghai Wanjin CNHTC Sinotruck Sales Co., Ltd., is the only joint-stock enterprise which was built by China National Heavy Duty Truck Group Co., Ltd who also has its own shares. This company is built through strict market survey to meet the needs of exporting to oversea markets through Shanghai Port.
Major Function: Specially selling HOWO, STEYR, STEYR KING, HUANGHE PRINCE series heavy duty trucks. Now our company has the ability of selling completed trucks, technical service, the supply of the spare parts, staff training, quality information feedback, truck insurance and so on. We really offer omnibearing services to customers.
Shanghai is the economic and the global shipping center. As a company located in Shanghai, our company naturally became the window of CNHTC selling its products to overseas markets.
Human Resources: The staffs of the company always are active in the filed of heavy duty truck′s sale and service. As a professional group engaged in the heavy duty truck of domestic, international marketing, they master its information from international and domestic. The staffs are familiar with the traffic regulations and the service technology in STEYR heavy duty trucks. They can provide buying truck information, corrective maintenance guidance, driver and repairman training and the skills of purchasing good spare parts for the customers.
Hardware Facilities: Our company is located in No. 1459 Shuichan Road, Baoshan District, Shanghai( opposite to North Logistics Company). The geographical position is superior, the traffic is convenient. It covers 10 mus. The office building covers more than 1000 square meters, the indoor whole sealing maintenance workshop contains 1500 square meters, 300 square meters of spare parts storehouse. It also sets up the training room, customer rest room, washing truck yard, and so on. We have just purchased a set of frame correction instrument, the maintenance tool and equipments especially used in heavy duty truck
Disclaimer: China Truck Manufacturers.Com is not responsible for the accuracy, authenticity, or legality of any information posted by suppliers. China Truck Manufacturers.Com will not be involved in legal disputes arising from transactions between customers and suppliers. China Truck Manufacturers.Com is a platform which connects potential buyers to potential sellers. China Truck Manufacturers.Com is not responsible for disagreements and disputes; such disagreements will be negotiated or settled at the expense of the buyer or seller. China Truck Manufacturers.Com provides platform service for buyers and sellers instead of self-operated service.
Contact Information: If your legal rights are violated, you are welcomed to send an email to our in-box. For issues arising from infringements, complaints, please contact [email protected]
