Specifications HOWO SERIES ConCRETE MIXER TRUCK Driving Type 8x4 | ||||
Model | ZZ1317N3261W | |||
Engine | Make: SINOTRUK | |||
Diesel 4-stroke direct injection diesel engine | ||||
Engine model: WD615.47, Euro II emission standard | ||||
6-cylinder in-line with water cooling, turbo-charging and intercooling | ||||
Maximum output: 371 hp (273 Kw) at 2200 rpm | ||||
Maximum torque: 1460 Nm at 1300-1600 rpm | ||||
Number of cylinder: 6 | ||||
Displacement: 9.726 L | ||||
Bore: 126 mm | ||||
Stroke: 130 mm | ||||
Specific fuel consumption: 195 g/kWh | ||||
Engine oil filling quantity: 19 l | ||||
Cooling system filling quantity (long-term filling): 40 l | ||||
Thermostat with 71ºC opening begin | ||||
Twin cylinder air compssor | ||||
Transmission | HW19710T, synchromesh, 10 forwards and 2 reverse | |||
Ratio: 14.36 10.66 7.88 5.82 4.38 3.28 2.44 1.8 1.33 1 14.01(R1) 3.2(R2) | ||||
Propeller Shaft | Double universal joint propeller shaft with gear-shaped coupling flange | |||
Front Axle | HF9, Steering with doubleT-cross section beam | |||
Rear Axle | HC16, Central reduction with hub reduction and with differential locks between wheels and axles . | |||
Ratio:4.8 | ||||
Chassis | frame: U-profile parallel ladder frame with section of 300x80x8mm, and reinforced subframe all cold riveted cross members | |||
Front suspension:10 semi-elliptic leaf spring, hydraulic telescopic double-action shock absorbers and stabilizer | ||||
Rear suspension:12 leaf semi-elliptic springs, bogie spring and stabilizer | ||||
Aluminium fuel tank: 300 L capacity with locking fuel cap, fitted to the off side of the chassis | ||||
Steering | ZF power steering, modol ZF8118, hydraulic steering with power assitance | |||
Brakes | Service brake: dual circuit compssed air brake | |||
Parking brake (emergency brake): spring energy, compssed air operating on front shaft and rear wheels | ||||
Auxiliary brake: engine exhaust brake | ||||
ABS control system: for option | ||||
Wheels & Tyres | Tire: 12.00R22.5, tubeless radial tyre, 12 nos+1 spare tire | |||
Driver's Cab | HW76 Long cab,new facelift, with two seats and one bed, 2-arm windscreen wiper system with three speeds, | |||
damped adjustable driver's seat, with heating and ventilating system, exterior sun visor, safety belts, adjustable steering wheel, air horn, | ||||
air conditioner , with transverse stabilizer,with 4-point support fully floating suspension + shock absorber | ||||
Electrics | Operating voltage: 24 V, negative grounded | |||
Starter: 24 V, 5.4 Kw | ||||
Alternator: 3-phase, 28 V, 1500 W | ||||
Batteries: 2 x 12 V, 165 Ah | ||||
Cigar-lighter, horn, headlamps, fog lights, brake lights, indicators and reverse light | ||||
Instrument Panel | Active check central controllor with indicators, with this integral instrument the daily manual checks on the vehicle and combined indicators | |||
of compssed air pssure, coolant temperature, engine oil pssure and battery charging | ||||
Dimensions mm | Wheel base | 1800+3200+1350 | ||
Front/Rear wheel track | 2041/1830 | |||
Front/Rear overhang | 1500/2463 | |||
Overall dimension(L*W*H) | 10304*2496*3999 | |||
Weight kg | Dead weight | 14000 | ||
Gross vehicle weight | 50000 | |||
Front axle loading capacity | 2*9000 | |||
Rear axle loading capacity | 2*16000 | |||
Performance | Maximum driving speed (km/h) | 90 | ||
Maximum gradeability (%) | 30 | |||
Minimum ground clearance (mm) | 298 | |||
Fuel consumption (l/100 km) | 40 | |||
Parameter of the drum | Mixing Capacity m³ | 12 | ||
Charge speed m³/min | ≥3 | |||
Discharge speed m³/min | ≥2 | |||
Surplus % | ≤0.5 | |||
Drum speed rpm | 0~18 | |||
Drive system | Gearbox | PMP PMB 7.5SP | ||
Hydraulic pump | PMP PMH P110 | |||
Hydraulic motor | PMP PMH M110 | |||
Water supply system | Water tank volume L/Form of | 400/Electric water pump | ||
The manufacturer reserves the right of technical alteration/change for better improvement without prior notice! |
Shanghai HOKA VEHICLE TRADING Co., Ltd (HOKA VEHILCE hereafter in short) has been engaged in the heavy duty truck industry for more than 15 years; With the professional team and first-class design and production experience and market capacity, HOKA VEHILCE has exported and delivered more than 5, 000 units heavy duty trucks to countries from Africa, Middle East, Southeast Asia, and South America.
HOKA VEHILCE maintains dealership and distribution authorization from manufacturer including SINOTRUK, SHACMAN, DONGFENG, CIMC, SHENGRUN, etc. Our main products range from Dump Truck, Tractor Truck, Concrete Mixer Truck, Van Truck, Lorry Truck, Off-road Dump Truck, Tanker Truck, Truck Mounted Cranes, trailer, tanker trailers and all other kinds of modified trucks.
HOKA VEHILCE, focusing on "Top Starting Point, High Quality and Worry-free Service", is committed to create a first-class equipment company. The company has a complete product development, manufacturing, inspection and marketing system; The company has abundant technical team, familiar with local and major exporter product standards; It brings the international advanced equipment and improves the manufacturing process of automation and information technology to ensure the quality in the process. Its network of marketing service covers over 50 countries in Asia, Africa, America, Europe and other international markets to provide users with first-class, prompt sales consulting and service guarantee.
The company always stick to the corporate values of "Forge high-quality products with delication and contribution to the cosciatu with high quality products", to provide all users with first class products. We not only consider all company staffs, we but also consider more for our customers and our product users. We are always aiming to build a long-term mutual-benefit cooperation business relationship with all our overseas customers and all our partners.
HOKA VEHILCE, we transport your cargos, we deliver the world, we carry your dreams!
Disclaimer: China Truck Manufacturers.Com is not responsible for the accuracy, authenticity, or legality of any information posted by suppliers. China Truck Manufacturers.Com will not be involved in legal disputes arising from transactions between customers and suppliers. China Truck Manufacturers.Com is a platform which connects potential buyers to potential sellers. China Truck Manufacturers.Com is not responsible for disagreements and disputes; such disagreements will be negotiated or settled at the expense of the buyer or seller. China Truck Manufacturers.Com provides platform service for buyers and sellers instead of self-operated service.
Contact Information: If your legal rights are violated, you are welcomed to send an email to our in-box. For issues arising from infringements, complaints, please contact [email protected]