Hongtek Filtration Co., Ltd.

Add to Fav
1

Chat with Supplier

Home Parts Truck Parts Water truck parts Water truck pumps MP series High Flow Pleated Cartridges
MP series High Flow Pleated Cartridges
  • MP series High Flow Pleated Cartridges
  • MP series High Flow Pleated Cartridges
  • MP series High Flow Pleated Cartridges

MP series High Flow Pleated Cartridges

FOB Reference Price:
Minimum Order:
2
Quantity:
100000
Port:
China
Payment:
L/C, T/T, Western Union, Paypal, Money Gram
Add to Fav
Product Description

Description

MP Series High Flow Pleated Cartridges are designed for applications with large flow or contaminant removal requirements. The most outstanding characteristics of them are high flow capacity and high filtration efficiency. Outside to inside flow direction is the usual water flow pattern. The unique radial pleat design permits higher flow rates than standard 2.5 inch diameter filter elements, resulting in significantly saving labor force, time and space of water system.

MP Series High Flow Pleated Cartridges have high particle removal efficiency and strong contaminant holding capability. PP pleated high flow cartridges utilize polypropylene end caps, outer netting and inner hard core to protect the radial pleated structure integrity, providing consistent performance and good quality for effective particle retention. MP Series pleated high flow cartridges can directly 100% replace 3M Cuno 7000 and 740B high flow series filter elements.


Specification
Filter Media Polypropylene
Length 20"(508mm), 40"(1016mm), 60"(1524mm)
Outside Diameter 6 inch (152.4mm)
Inside Diameter 3 inch (76.2mm)
Filtration Rating 1μm, 3μm, 5μm, 10μm, 20μm, 50μm, 70μm
Support/Drainage Polypropylene(PP)
End Cap Material Glass fiber reinforced Polypropylene(PP)
Seal Material EPDM, Buna-N, Silicon

Application

● Refining

● Process Waters

● Pre-RO Filtration

● Machine Coolants

● Boiler Condensate

● Petroleum Chemical Industry

● Injection & Produced Waters

● Ground/Reclaimed/Waste Waters


Performance

Operation Data for MP Series High Flow Pleated Cartridges

Suggested Maximum Flow Rate 1560 LPM
Maximum Operating Temperature 80℃
Maximum Forward Differential Pressure 50 psid @ 68°F (3.4 bar @ 20°C)
Recommended Change-out Differential Pressure 35 psid @ 68° (2.4 bar @ 20°C)


Flow Rate for MP Series 5 micron High Flow Pleated Cartridges

filter_flow_rate.jpg


Tech Support
Show Detail for High Flow Pleated Cartridges
High-Flow-Series-Cartridges.jpg

● Considerate designed handle easily for install and change out

● "Twist to lock" seating mechanism design to provide a positive seal

● 100% replace 3M Cuno 7000 and 740B high flow series filter element

● A large diameter core allows up to 500 gpm for per high flow pleated cartridges

● 2-3 times larger surface area than normal diameter 6" vertical pleated high flow cartridges

High Flow Pleated Cartridges vs Depth & Pleated Cartridges
High_Flow _Cartridges_vs_Depth_Cartridges.png

● The High Flow System requires 90% fewer filter cartridges as competitive 2.5" cartridge

systems for a requested flow rate.

● The High Flow Housings are 33% to 50% smaller than competitively sized housings for a

requested flow rate, and save much space for when using pleated high flow cartridges.

● High efficiency filtration of high flow cartridge filters is a user-friendly high flow system,

means fewer filters and faser change-outs than competitive cartridges.

Installtion Example for MP Series High Flow Pleated Cartridges
install_high_flow_cartridges.jpg

● Long service life and easy to replace, reduced cartridge handling

● High flow rate & low delta pressure, nominal rated filters are designed

● Cartridges are suitable to installed in standard high flow filter housings

● Radial pleated structure, large filtration area and high dirt holding capacity

● High flow pleated cartridges have rock-steady structure and reliably good sealing


Oder Information
MP Material Length Filtration Rating O-ring Material

MP Series

High Flow Pleated Cartridges

P = Polypropylene 20 = 20" 1 = 1μm E = EPDM
3 = 3μm
40 = 40" 5 = 5μm B = Buna-N
10 = 10μm
60 = 60" 20 = 20μm S = Silicon
50 = 50μm
70 = 70μm

For Example:

MP-P-40-5-E

MP Series High Flow Pleated Cartridges - Material = PP - Length = 40" - Filtration Rating = 5μm - O-ring Material = EPDM


Product Image

MP series High Flow Pleated CartridgesMP series High Flow Pleated CartridgesMP series High Flow Pleated Cartridges
Company Profile

Business Info (公司经营范围)

Business Range: Industrial Equipment & Components , Manufacturing & Processing Machinery

Management Certification: ISO 9001

Main Products: High Flow Filter Cartridges, High Flow Pleated Filters, PP Melt Blown Filters, Water Filter Cartridges, High Flow Filters, Pleated Filter Cartridges, Carbon Block Filters, String Wound Filters, Water Filter Bags, Filter Housings

 

Profile(公司简介)

 

Hongtek brand concept: Make Better Filtration! 

 

Hongtek Filtration Co., Ltd. is famous for high-tech filtration, separation and purification, committed to provide high quality filtration solution to meet worldwide customers various needs with good service, struggle for health, safety and environment friendly sustainable development. 

Since 2000, Hongtek specialize in better filtration solution, supply good quality high flow water filters & housings to a diverse range of customers in water treatment, food & beverage, electronics, oil & chemicals, petrochemical, sea water desalination, power generation industry etc. We are always committed to create more value for customers and engage in win-win business. 

Send your message to this supplier
Inquiry Title
Name
Phone
Email
Message
For better quotations,include:
-A self introduction
-Special requests,if any

Your message must be between 20-8000 characters